Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




8 posts

Wannabe Geek


Topic # 148570 23-Jun-2014 19:36
Send private message

Hi there,

I'm upgrading the phone wiring on an old house (about 30 yrs). I cant seem to locate any ETP and I suspect the external line just comes through the concrete slab and up into an interior wall where the old master telecom jack is situated.
I'd like to install a Dynamix X-DSL master filter in the wall cavity removing the master telecom jack. Technically I'm confident this will work
but I'm not sure how physically big the master filter is. I'm intending to put in a BT(voice) and RJ45(adsl) jacks in a pdl 600 type plate.
This allows me about 110mm x 70mm maximum hole size before I would have to do gib fixing.
Unfortunately the specs for this unit don't specify the physical measurements...

Can anybody help me out with advising what size these units are?

Many Thanks,
Shane

Create new topic
3729 posts

Uber Geek
+1 received by user: 1813

Subscriber

  Reply # 1072875 23-Jun-2014 19:44
One person supports this post
Send private message

I've seen one - they are surprisingly small and easily fit in your pocket.
Sorry, no measurements available.




Sideface


1736 posts

Uber Geek
+1 received by user: 896


  Reply # 1072886 23-Jun-2014 19:51
One person supports this post
Send private message

There is one in this pic. I can't find a ruler, but it's probably 60-80mm wide

Middle left under the yellow patch cable




Location: Dunedin

 
 
 
 


95 posts

Master Geek
+1 received by user: 8

Subscriber

  Reply # 1072901 23-Jun-2014 20:22
Send private message

just use an av type wall box it will give u plenty of room.

5074 posts

Uber Geek
+1 received by user: 2100

Trusted
Subscriber

  Reply # 1072902 23-Jun-2014 20:24
3 people support this post
Send private message

Yes it will fit in the wall. It won't fit in the flush box though as there won't be room for the RJ45 / BT jack to go far enough back when you screw the PDL plate on.
Hole required, much smaller than the hole required for the flush box. I've even done one behind a regular box type jack-point.




Chorus has spent $1.4 billion on making their xDSL broadband network faster. If your still stuck on ADSL or VDSL, why not spend from $150 on a master filter install to make sure you are getting the most out of your connection?
I install - Naked DSL, DSL Master Splitters, VoIP, data cabling and general computer support for home and small business.
Rural Broadband RBI installer for Ultimate Broadband and Full Flavour

 

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com


95 posts

Master Geek
+1 received by user: 8

Subscriber

  Reply # 1072907 23-Jun-2014 20:33
Send private message

and let it sit in the wall cavity

Talk DIrtY to me
4030 posts

Uber Geek
+1 received by user: 2075

Trusted
Subscriber

  Reply # 1073029 24-Jun-2014 01:08
Send private message

This big:





Whatifthespacekeyhadneverbeeninvented?


854 posts

Ultimate Geek
+1 received by user: 125


  Reply # 1078363 2-Jul-2014 00:56
One person supports this post
Send private message

coffeebaron: Yes it will fit in the wall. It won't fit in the flush box though as there won't be room for the RJ45 / BT jack to go far enough back when you screw the PDL plate on.
Hole required, much smaller than the hole required for the flush box. I've even done one behind a regular box type jack-point.


Sorry to bring up a week-old post but to extend on what coffeebaron has said here (for people looking in future):

A Dynamix filter will fit into a PDL Flushbox with a 600-series blank faceplate (i.e. no modules), Chorus seem fine with this option, we opted for this method in our garage to keep things clean.

It won't as coffeebaron said fit in a standard PDL flushbox with any sort of data/phone jack as they are too large.   (Actually it kinda might if you are lucky but it'd be a super tight fit)

Best bet, modify the flushbox, or these days with 3D printing, print your own PDL 600-series compatible master filter + data jack compatible sized flushbox (extra depth)  -  assuming the building code couldn't bite in here.

3095 posts

Uber Geek
+1 received by user: 510

Trusted

  Reply # 1078367 2-Jul-2014 01:42
Send private message

Its like two matchboxes
Or a D size battery




Ray Taylor
Taylor Broadband (rural hawkes bay)
www.ruralkiwi.com

There is no place like localhost
For my general guide to extending your wireless network Click Here






8 posts

Wannabe Geek


  Reply # 1078771 2-Jul-2014 17:05
Send private message

Hey folks,

For completeness here's the final verdict.

You were exactly correct Nigelj, the filter will fit, albeit snugly inside a PDL flush box. If you have one of the older style flush boxes that are flat at the back you can also fit in the PDL RJ45 and BT sockets. It's very snug but it fits with 1mm or so to spare. The newer flush boxes arn't quite as deep so they won't take the BT socket module they will take the RJ45 one though.

Cheers all


Talk DIrtY to me
4030 posts

Uber Geek
+1 received by user: 2075

Trusted
Subscriber

  Reply # 1078786 2-Jul-2014 17:29
Send private message

^^^

Assuming that you're mounting the flushbox onto the side of a stud, you could always cut the back of it out for extra room.

Another alternative is one of these:
Mounting bracket




Whatifthespacekeyhadneverbeeninvented?


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39


UAV Traffic Management Trial launching today in New Zealand
Posted 12-Dec-2017 16:06


UFB connections pass 460,000
Posted 11-Dec-2017 11:26


The Warehouse Group to adopt IBM Cloud to support digital transformation
Posted 11-Dec-2017 11:22


Dimension Data peeks into digital business 2018
Posted 11-Dec-2017 10:55


2018 Cyber Security Predictions
Posted 7-Dec-2017 14:55


Global Govtech Accelerator to drive public sector innovation in Wellington
Posted 7-Dec-2017 11:21


Stuff Pix media strategy a new direction
Posted 7-Dec-2017 09:37


Digital transformation is dead
Posted 7-Dec-2017 09:31


Fake news and cyber security
Posted 7-Dec-2017 09:27


Dimension Data New Zealand strengthens cybersecurity practice
Posted 5-Dec-2017 20:27


Epson NZ launches new Expression Premium Photo range
Posted 5-Dec-2017 20:26


Eventbrite and Twickets launch integration partnership in Australia and New Zealand
Posted 5-Dec-2017 20:23


New Fujifilm macro lens lands in New Zealand
Posted 5-Dec-2017 20:16



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.