Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




1213 posts

Uber Geek
+1 received by user: 148


Topic # 150115 11-Jul-2014 15:10
Send private message

Just had the chorus guys in doing an install this week and the fibre patch cable is just hanging loose - I was going to tidy this up with some standard capping but I'm just concerned that a right angled bend might not be the best for the fibre - ideas?


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
2777 posts

Uber Geek
+1 received by user: 586


  Reply # 1087243 11-Jul-2014 15:16
Send private message

Get some flexi-conduit?



1213 posts

Uber Geek
+1 received by user: 148


  Reply # 1087245 11-Jul-2014 15:19
Send private message

wellygary: Get some flexi-conduit?


Now that it's plugged in an the fibre is active I really don't want to be unplugging it to get the fibre through otherwise that would have been easy

 
 
 
 


1389 posts

Uber Geek
+1 received by user: 101

Subscriber

  Reply # 1087296 11-Jul-2014 16:01
Send private message

nitrotech:
wellygary: Get some flexi-conduit?


Now that it's plugged in an the fibre is active I really don't want to be unplugging it to get the fibre through otherwise that would have been easy


You may as well power it down first ! 
Shouldnt it auto recover just as any other broadband connection?


2777 posts

Uber Geek
+1 received by user: 586


  Reply # 1087299 11-Jul-2014 16:12
One person supports this post
Send private message

nitrotech:
wellygary: Get some flexi-conduit?


Now that it's plugged in an the fibre is active I really don't want to be unplugging it to get the fibre through otherwise that would have been easy


Slit the back of the flexi and slip it over the fibre, then affix it into place with some conduit holders with the cut turned toward the wall, you could even tape it closed if you really wanted to

13459 posts

Uber Geek
+1 received by user: 2278

Trusted

  Reply # 1087301 11-Jul-2014 16:16
Send private message

Do you mean the yellow cable? That looks like a standard ethernet cable to me, bend it as much as you want. The fiber's in the conduit coming down from top right isn't it?




AWS Certified Solution Architect Professional, Sysop Administrator Associate, and Developer Associate
TOGAF certified enterprise architect
Professional photographer


2316 posts

Uber Geek
+1 received by user: 665

Trusted
Subscriber

  Reply # 1087313 11-Jul-2014 16:34
Send private message

timmmay: Do you mean the yellow cable? That looks like a standard ethernet cable to me, bend it as much as you want. The fiber's in the conduit coming down from top right isn't it?

I agree.  If the connectors on this yellow cable are the same as the ones going into the black box, then it is a standard computer ethernet (network) cable and  you can pretty much bend it as much as you like.  You can also replace it with a longer (50m+) or shorter cable available from any computer store.




"4 wheels move the body.  2 wheels move the soul."

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams

228 posts

Master Geek
+1 received by user: 40


  Reply # 1087329 11-Jul-2014 16:48
4 people support this post
Send private message

timmmay: Do you mean the yellow cable? That looks like a standard ethernet cable to me, bend it as much as you want. The fiber's in the conduit coming down from top right isn't it?


That yellow cable you talk of is the fibre cable coming in from the demark box to the ONT.

DON'T BEND IT.

Unplugging it can get dirt on the end which can cause a crappy connection.

Realistically, the whole lot should have been put in a cabinet!




 

 

 


805 posts

Ultimate Geek
+1 received by user: 204

Subscriber

  Reply # 1087338 11-Jul-2014 17:08
Send private message

timmmay: Do you mean the yellow cable? That looks like a standard ethernet cable to me, bend it as much as you want. The fiber's in the conduit coming down from top right isn't it?


- Nope Its a Fibre Patch cord  - spliced one end and pluged into the ONT ( it has been run through the back of the mounting tray at the back of the ONT)

nitrotech: >

- In my opinion it actualy shouldnt be there but thats another story - but its actualy an issue for Chorus not for you as its on their side of the network

- Dont unplug it, as its been inspected for contamination before being connecting and like all Fibre Plug connections is subject to contamination damage if you unplug it , move it around or touch things with it and then plug it back in (even for a few seconds)

- Where was this install ? If you are willing PM me the details and ill pass it on to the QA people if appropriate for follow up


Talk DIrtY to me
4061 posts

Uber Geek
+1 received by user: 2112

Trusted
Subscriber

  Reply # 1087352 11-Jul-2014 17:43
One person supports this post
Send private message

InstallerUFB: Dont unplug it, as its been inspected for contamination before being connecting and like all Fibre Plug connections is subject to contamination damage if you unplug it , move it around or touch things with it and then plug it back in (even for a few seconds)


Are these difficult to unplug? IMO, they would need to be if they're that susceptible to dust and other contamination.




Whatifthespacekeyhadneverbeeninvented?




1213 posts

Uber Geek
+1 received by user: 148


  Reply # 1087388 11-Jul-2014 18:15
Send private message

cjmchch:
timmmay: Do you mean the yellow cable? That looks like a standard ethernet cable to me, bend it as much as you want. The fiber's in the conduit coming down from top right isn't it?


That yellow cable you talk of is the fibre cable coming in from the demark box to the ONT.

DON'T BEND IT.

Unplugging it can get dirt on the end which can cause a crappy connection.

Realistically, the whole lot should have been put in a cabinet!


Yes but what you can't see is the cabinet underneath this and there's already fibre from another company in there - but you're right I do need another rack

3224 posts

Uber Geek
+1 received by user: 1022

Subscriber

  Reply # 1087429 11-Jul-2014 19:21
Send private message

And the 'Sky standard' installers are out in force!! I expect to see much much more of this.

I don't know why they bothered putting that ETP there. They should have just taken the fibre directly to the ONT and spliced in the back of that.

Numpty's is the best way to describe these people.

2141 posts

Uber Geek
+1 received by user: 720

Subscriber

  Reply # 1087568 11-Jul-2014 23:17
Send private message

They sound like the opposite of the ones who installed fibre at my place. The installers did a neat job (no complaints there). But they insisted on installing a surface mount RJ45 socket next to the ONT. Which they wired back to the ETP. And they placed a label on it saying "Voice to ETP" I told them don't bother installing it as the phone wiring in the house is all in pieces and hasn't been used for years. Had been using VOIP over ADSL since Orcon released their Genius modem / routers. Their reason for insisting on it - In case your house gets selected for auditing.

1774 posts

Uber Geek
+1 received by user: 328

Subscriber

  Reply # 1087623 12-Jul-2014 09:29
Send private message

Interesting. Wouldn't have been any use in my case as the ETP is purely the fibre termination point.

Have you got copper to yours as well?

2141 posts

Uber Geek
+1 received by user: 720

Subscriber

  Reply # 1087876 12-Jul-2014 21:19
Send private message

Yes my house still has the original copper line in place. Fibre was installed the same PVC ducting that was used for the copper line. The original piece of CAT5 cable that goes from the ETP to the router location is still there. So the line they installed just duplicates the piece of CAT5. ETP was installed where the demark point used to be. And router, ONT ect is located in cupboard that backs onto ETP. So only about 3m of hybrid fibre / copper cable and my old CAT5. And both of them are joined together inside the ETP, So I have the equivalent of 2 jackpoints that are right next to each over, connected to the same line from the street cabinet, yet are on different cables.

Am tempted to remove the RJ45 socket so I can use it for other things, but don't want to get the fibre installers into trouble if my house gets selected for auditing.

307 posts

Ultimate Geek
+1 received by user: 3


  Reply # 1088909 14-Jul-2014 21:40
Send private message

chevrolux: And the 'Sky standard' installers are out in force!! I expect to see much much more of this.

I don't know why they bothered putting that ETP there. They should have just taken the fibre directly to the ONT and spliced in the back of that.

Numpty's is the best way to describe these people.


Perhaps that's because its not an ETP (E = External).

It's a BUDI - fibre break out/distribution box where multiple connections can be provisioned from.






Disclaimer: Comments I make are NOT on behalf of my employer, these comments are mine and mine alone.

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand's IT industry in 2018 and beyond
Posted 22-Jan-2018 12:50


Introducing your new workplace headache: Gen Z
Posted 22-Jan-2018 12:45


Jucy set to introduce electric campervan fleet
Posted 22-Jan-2018 12:41


Hawaiki cable system will be ready for service in June 2018
Posted 22-Jan-2018 12:32


New Zealand hits peak broadband data
Posted 18-Jan-2018 12:21


Amazon Echo devices coming to New Zealand early February 2018
Posted 18-Jan-2018 10:53


$3.74 million for new electric vehicles in New Zealand
Posted 17-Jan-2018 11:27


Nova 2i: Value, not excitement from Huawei
Posted 17-Jan-2018 09:02


Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.