Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




1249 posts

Uber Geek
+1 received by user: 256

Subscriber

Topic # 159903 16-Dec-2014 18:38
Send private message

I was looking for info / calculations on the possibility of a VDSL connection for a client. I had been told no by an ISP but wanted to know how bad  / good the signal was.

I found this link: http://www.speedguide.net/dsl_speed_calc.php

Given the downstream Attenuation it gives you a rough estimate of distance to cabinet, ADSL, ADSL 2 and VDSL speeds possible.

Being a newbie to figuring out VDSL signals I'll also put what else I think I've discovered here:

Attenuation is the reduction in signal strength on your line, sometimes also refered to as "loop loss". - Lower is good. Should be ideally under 20dB

SNR - signal To Noise Ratio - Higher is good.


A good graph to get a guide on attenuation vs distance vs speed / dsl type is found here: http://blog.warcom.com.au/wp-content/uploads/2011/03/internode-adsl2-distance1.jpg

A good explanation of how it hangs together is found here: http://www.geekzone.co.nz/forums.asp?topicid=105744


Chorus capability map found here: https://www.chorus.co.nz/network-upgrade-map

and of course steves info on fixing line issues. http://www.geekzone.co.nz/sbiddle/8357

HTH
shane




nunz

Create new topic
'That VDSL Cat'
9066 posts

Uber Geek
+1 received by user: 1993

Trusted
Spark
Subscriber

  Reply # 1198580 16-Dec-2014 18:42
One person supports this post
Send private message

Things to be aware of, all of these links are based off dsl networks in other countries Where they would operate with different line profiles and such.

While its good for a rough estimation, ild be careful about taking it for anything more than that..






#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


5188 posts

Uber Geek
+1 received by user: 1681


  Reply # 1198593 16-Dec-2014 19:21
One person supports this post
Send private message

nunz:
SNR - signal To Noise Ratio - Higher is good.


Modems typically don't report SNR, even if they label it SNR. What most modems report is noise margin which in layman's terms is the difference between the wanted signal and the background noise.

xDSL equipment sets a noise margin and the negotiates the maximum line speed possible while maintaining that margin. Chorus gear on a normal profile is set to 12dB, so if you see a slightly lower value reported (say 11dB) it means the background noise on the line has increased slightly since the line speed was negotiated - opposite is also true.

A lot of ULL gear uses a 6dB margin - basically sacrificing a little robustness for increased line speed.

So with reported noise margin (often labelled SNR), it's not a case of higher is better, but a tradeoff between reliability and speed - some modems will let you force the SNR way down, increasing your speed, but also increasing reliability problems.

The closer your reported noise margin is to the target the better - it means the line is stable.

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.