Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




117 posts

Master Geek
+1 received by user: 9


Topic # 166049 28-Feb-2015 20:36
Send private message

Hi There,

Was hoping that someone could point me in the right direction with this one.

We have a brand new house which has data cabled throughout, all comes into a control box in the garage. I can then re-patch thInge from the patch panel.

So all is good, the ONT is installed in this control box. I have patched the ONT into one of the ports that goes to my study which is on the other side of the house, here I have my router.

All is working well BUT whenever the wife runs the dryer which is in the garage and on a seperate plug point, my UFB drops out. Ran a few checks and the ONT or my router (in the study) is not loosing power. Just the link between ONT and the study seems to drop out (I think). I have 3 ports going to my study, have tried all of them and same issue.

This only happens when the dryer is running, it drops out on start of the dryer, then randomly every few mins.

Any ideas what could cause this problem? All brand new cabling that was tested, hard for me to get the electricians back if I don't know what to ask them the test.

Thanks

Create new topic
3263 posts

Uber Geek
+1 received by user: 1270

Subscriber

  Reply # 1248629 28-Feb-2015 20:57
Send private message

Even though the dryer is on a separate power point. The dryer power point and the ONT power point are probably on the same circuit. Get some long extension cords and use them to plug the ONT into your office power point. Or at least a power point that is a long way from the garage / laundry. As what you need to do is find out if the issue is volt drop or interference on the power cable that supplies the ONT. Or have the network cables between the ONT and office been installed too close to power cables. Meaning they are picking up interference.





5187 posts

Uber Geek
+1 received by user: 1681


  Reply # 1248644 28-Feb-2015 22:37
Send private message

Might be a poorly terminated RJ45 also - can you try another outlet?

 
 
 
 




117 posts

Master Geek
+1 received by user: 9


  Reply # 1251041 4-Mar-2015 14:13
Send private message

Thanks guys. Will be trying a couple of the other power points to see if I can isolate it. Hmm should have tried to use a long extension!

1662 posts

Uber Geek
+1 received by user: 424


  Reply # 1253068 7-Mar-2015 22:29
One person supports this post
Send private message

Find out what link is dropping.  Your router should have logs.  See what happens if you place the router right next to the ONT in the shed connected via a one meter patch lead and patch your PC (study) into the router

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.