Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | ... | 56
1387 posts

Uber Geek


  # 1441305 6-Dec-2015 11:50
Send private message

mikenzb:
mercutio: has anyone else found that INP settings seem to go up more readily than they used to?  one of my connections is on INP 2 now, and error count wasn't that high.. still has the same interleaving as migration day.

wondering if that's what people are seeing when they see sync rates going down over time, it reduces sync speed qutie a bit on INP 2..

curiously my other connection is on INP 0.


I was about to ask this, I started on DLM-2/4 with INP 0/1 then it resynced a few days later with DLM-4 INP 1/1 and now I'm sitting at DLM-6 INP 2/2.
My line is pretty clean no CRC errors and I don't see many other errors so I wonder what DLM is doing.

Also is it just me or am I the only one experiencing 20 SNR on the downstream (hitting 70 Mbps tho) and 8 SNR on the upstream? 


both of my lines are between 8 and 9db snr on both up and down now.  although i'm over 70 megabit on one connection.. using broadcom, it's the ikns line that seems to be doing weird INP stuff, and that's gone down from about 66 megabit to about 56 megabit on 8b.  maybe it wants to shift me to 17a and wants to reduce all errors.  i dunno, here's hoping :)

i'm on 6 delay down and 8 delay up too, which seems a little strange.

this line has always had a few crc erorrs, but not bursty.  now there is 0 since the resync at 4:20 or so this morning, just FEC...


Previous 1 day time = 24 hours 0 sec
FEC: 61909 2592
CRC: 0 5
ES: 0 3
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
Since Link time = 6 hours 26 min 11 sec
FEC: 33938 419
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0



8910 posts

Uber Geek

Lifetime subscriber

  # 1441327 6-Dec-2015 12:04
Send private message

mikenzb: I was about to ask this, I started on DLM-2/4 with INP 0/1 then it resynced a few days later with DLM-4 INP 1/1 and now I'm sitting at DLM-6 INP 2/2.
My line is pretty clean no CRC errors and I don't see many other errors so I wonder what DLM is doing.

Also is it just me or am I the only one experiencing 20 SNR on the downstream (hitting 70 Mbps tho) and 8 SNR on the upstream? 


i would say the reason your SNR is so high is because you have a good line and DLM thinks there is no point having a SNR of 9 or 12 when it can get away with something higher

My line started with a SNR of 16 and is currently sitting at 14dB. No point in having a lower SNR as it cant go any faster anyways.

I dropped back to DLM-1 after about 3 days.

 
 
 
 


608 posts

Ultimate Geek

Trusted
Lifetime subscriber

  # 1441407 6-Dec-2015 14:21
One person supports this post
Send private message

mine jumped from 60/10 to 70/30 sometime last week.

A few days ago Spark lifted the 11 Mbps upload cap and i can use all the upload bandwidth. Nice.

Took me three days to go back to DLM 1

239 posts

Master Geek

Subscriber

  # 1441427 6-Dec-2015 17:02
Send private message

Just got back from a weekend away to find that my line had re-synced for the second time since the initial change to 998.

Download sync has dropped 6Mb/s (59 to 53), and upload had dropped 1Mb/s (10.4 to 9.4). Still no DLM-1 it appears.



8910 posts

Uber Geek

Lifetime subscriber

  # 1441430 6-Dec-2015 17:17
Send private message

Just remember that when you initially changed to 998 you SNR might not have been sitting on a standard chorus profile, ie 9dB or 12dB, it might have been on something like 7dB as when it would have resynced for the change to 998 it would have been during a quiet period. That small 2dB or so change back to a standard profile might account for your sync speed changes.

'That VDSL Cat'
11174 posts

Uber Geek

Trusted
Spark
Subscriber

  # 1441438 6-Dec-2015 17:28
Send private message

Jase2985:
mikenzb: I was about to ask this, I started on DLM-2/4 with INP 0/1 then it resynced a few days later with DLM-4 INP 1/1 and now I'm sitting at DLM-6 INP 2/2.
My line is pretty clean no CRC errors and I don't see many other errors so I wonder what DLM is doing.

Also is it just me or am I the only one experiencing 20 SNR on the downstream (hitting 70 Mbps tho) and 8 SNR on the upstream? 


i would say the reason your SNR is so high is because you have a good line and DLM thinks there is no point having a SNR of 9 or 12 when it can get away with something higher

My line started with a SNR of 16 and is currently sitting at 14dB. No point in having a lower SNR as it cant go any faster anyways.

I dropped back to DLM-1 after about 3 days.


its actually because @mikenzb is hitting the limit, so the snr is pulling back.

Based off upstream, he is on the 9dB profile and noise is just moving around a bit.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


239 posts

Master Geek

Subscriber

  # 1441461 6-Dec-2015 17:59
Send private message

Jase2985: Just remember that when you initially changed to 998 you SNR might not have been sitting on a standard chorus profile, ie 9dB or 12dB, it might have been on something like 7dB as when it would have resynced for the change to 998 it would have been during a quiet period. That small 2dB or so change back to a standard profile might account for your sync speed changes.


You're correct that my SNR was lower (6.4dB to be precise) after the initial 998 resync, but it changed to 9dB a few days later which didn't actually change the speeds at all.

 
 
 
 


1387 posts

Uber Geek


  # 1441499 6-Dec-2015 19:55
Send private message

Djmixerdomo:
Jase2985: Just remember that when you initially changed to 998 you SNR might not have been sitting on a standard chorus profile, ie 9dB or 12dB, it might have been on something like 7dB as when it would have resynced for the change to 998 it would have been during a quiet period. That small 2dB or so change back to a standard profile might account for your sync speed changes.


You're correct that my SNR was lower (6.4dB to be precise) after the initial 998 resync, but it changed to 9dB a few days later which didn't actually change the speeds at all.


i only dropped from 88 to 85 or something with between 7 and 8, to 8.3.  Hmm, ... I thought I was on 9 :)  i think if you have decent signal strength then slight changes in snr make a lot less difference, ... whereas if you had like 20db per tone or something then it'd make a much more significant difference.

if you're on ikns line card and capping out at 70 megabit then it'll amke zero difference on 17a in most cases it seems. (it seems that most 17a profiles on ikns hit 70 megabit)

since the 998 bandplan change i've seen way more fluctuations in snr margin on dsl stats.  like d3 was sitting on 10db until just past 7 pm, and then it dropped off sharply to 8db then gradually rose up to around 9.5db staying constant, to then drop to 8db again.  i am curious what is causing it, as snr margins used to be a lot more constant, but at the same time it doesn't seem to be creating any issues.

1387 posts

Uber Geek


  # 1441500 6-Dec-2015 20:04
Send private message

Djmixerdomo: Just got back from a weekend away to find that my line had re-synced for the second time since the initial change to 998.

Download sync has dropped 6Mb/s (59 to 53), and upload had dropped 1Mb/s (10.4 to 9.4). Still no DLM-1 it appears.




what INP are you on?

239 posts

Master Geek

Subscriber

  # 1441502 6-Dec-2015 20:11
Send private message

Not sure how to/or if i can check, I've got a HG630b. My ping on speed test is 18ms

1387 posts

Uber Geek


  # 1441503 6-Dec-2015 20:15
Send private message

Djmixerdomo: Not sure how to/or if i can check, I've got a HG630b. My ping on speed test is 18ms


INP doesn't change ping, it's under adsl stats uhh, 

hg659 isn't showing it easily in web interface you may have to use telnet/ssh :(

and google suggests that it may be spark doing that, and i think someone said that spark block ssh?


14 posts

Geek

Trusted

  # 1441823 7-Dec-2015 09:53
Send private message

Looks like one of the cabinets in Orewa was done over the weekend. I've had a re-sync and my results are below.

I was always on a 17a profile prior to the Band 998 change.

However the Sync speed was about 60/11.





122 posts

Master Geek


  # 1441880 7-Dec-2015 11:05
One person supports this post
Send private message

The DLM has done it's thing and I'm now on just over 100Mbit/s!
I wonder what the theoretical max upload is

 

Type ? for command help

 

> adsl status

 

 

---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------

 

Running Mode : 17A State : SHOWTIME

 

DS Actual Rate :100016000 bps US Actual Rate : 39884000 bps

 

DS Attainable Rate :104549072 bps US Attainable Rate : 39686000 bps

 

DS Path Mode : Fast US Path Mode : Fast

 

DS Interleave Depth : 0 US Interleave Depth : 0

 

NE Current Attenuation : 11 dB Cur SNR Margin : 8 dB

 

DS actual PSD : -7.-2 dB US actual PSD : 12. 3 dB

 

NE CRC Count : 0 FE CRC Count : 0

 

NE ES Count : 0 FE ES Count : 0

 

Xdsl Reset Times : 0 Xdsl Link Times : 1

 

ITU Version[0] : b5004946 ITU Version[1] : 544e0000

 

VDSL Firmware Version : 05-04-08-00-00-06

 

Power Management Mode : DSL_G997_PMS_L0

 

Test Mode : DISABLE

 

-------------------------------- ATU-C Info ---------------------------------

 

Far Current Attenuation : 0 dB Far SNR Margin : 10 dB

 

CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da3f5

 

DSLAM CHIPSET VENDOR : < BDCM >

 

>

 


637 posts

Ultimate Geek

Subscriber

  # 1441885 7-Dec-2015 11:13
Send private message

I cant complain too much about my speed upgrade. Only just noticed it today.  Not really much of a download upgrade but a huge upload upgrade speed wise.  



Really bugger all point in the stress and hassle of going to UFB atm - shared driveway syndrome :P  The modem stats are 69993/29993

8910 posts

Uber Geek

Lifetime subscriber

  # 1441887 7-Dec-2015 11:14
Send private message

@bensmithnz who is your ISP? you are connected at 81/34

1 | ... | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | ... | 56
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Switch your broadband provider now - compare prices


Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Microsoft launches first Experience Center worldwide for Asia Pacific in Singapore
Posted 13-Nov-2019 13:08


Disney+ comes to LG Smart TVs
Posted 13-Nov-2019 12:55


Spark launches new wireless broadband "Unplan Metro"
Posted 11-Nov-2019 08:19


Malwarebytes overhauls flagship product with new UI, faster engine and lighter footprint
Posted 6-Nov-2019 11:48


CarbonClick launches into Digital Marketplaces
Posted 6-Nov-2019 11:42


Kordia offers Microsoft Azure Peering Service
Posted 6-Nov-2019 11:41


Spark 5G live on Auckland Harbour for Emirates Team New Zealand
Posted 4-Nov-2019 17:30


BNZ and Vodafone partner to boost NZ Tech for SME
Posted 31-Oct-2019 17:14


Nokia 7.2 available in New Zealand
Posted 31-Oct-2019 16:24


2talk launches Microsoft Teams Direct Routing product
Posted 29-Oct-2019 10:35


New Breast Cancer Foundation app puts power in Kiwi women's hands
Posted 25-Oct-2019 16:13


OPPO Reno2 Series lands, alongside hybrid noise-cancelling Wireless Headphones
Posted 24-Oct-2019 15:32


Waikato Data Scientists awarded $13 million from the Government
Posted 24-Oct-2019 15:27


D-Link launches Wave 2 Unified Access Points
Posted 24-Oct-2019 15:07


LG Electronics begins distributing the G8X THINQ
Posted 24-Oct-2019 10:58



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.