Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56
95 posts

Master Geek


  # 1540839 23-Apr-2016 19:28
Send private message

Stats for ADSL were 11 DL/800K UL.

 

Voyager is my ISP and yes that guy installed the master filter today.


'That VDSL Cat'
11171 posts

Uber Geek

Trusted
Spark
Subscriber

  # 1540841 23-Apr-2016 19:29
Send private message

beaglenz:

 

Stats for ADSL were 11 DL/800K UL.

 

Voyager is my ISP and yes that guy installed the master filter today.

 

 

Sounds ever so slightly subpar adsl, master filter would have improved that.

 

 

 

not a bad gain at all.

 

That upstream gain i would be celebrating by far. Upstream congestion is the downfall to adsl when your over about the 10mbit mark.

 

 

 

Maybe the better question to ask would be your attenuation figures. 





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


 
 
 
 


979 posts

Ultimate Geek

Trusted

  # 1540844 23-Apr-2016 19:37
Send private message

beaglenz:

 

I have two questions.

 

1. I had my VDSL connected today and I am getting reasonable 22DL/2.4UL speeds compared to ADSL. How do check whether I am running Band Plan 998?

 

2. What exactly will happen on 28 April, can I expect speeds to change or is what I have it?

 

 

 

 

im about 90% sure your already on 998.

 

I was on 17mbit/3.5mbit. on G.997 

 

After the change it was went to 22~25 / 2 ~ 2.5 depending on if it synced at a good time.

 

 


95 posts

Master Geek


  # 1540846 23-Apr-2016 19:40
Send private message

Here are the stats from my modem:

 


> vdsl status
vdsl status
  ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
   Running Mode            :       8B       State                : SHOWTIME
   DS Actual Rate          : 24448000 bps   US Actual Rate       :  2240000 bps
   DS Attainable Rate      : 24463200 bps   US Attainable Rate   :  2181000 bps
   DS Path Mode            :  Interleave    US Path Mode         :  Interleave
   DS Interleave Depth     :        0       US Interleave Depth  :        0
   NE Current Attenuation  :       24 dB    Cur SNR Margin       :        8  dB
   DS actual PSD           :     6. 3 dB    US actual PSD        :    18. 6  dB
   NE CRC Count            :        0       FE CRC Count         :        0
   NE ES Count             :        0       FE  ES Count         :        0
   Xdsl Reset Times        :        0       Xdsl Link  Times     :        1
   ITU Version[0]          : b5004946       ITU Version[1]       : 544e0000
   VDSL Firmware Version   : 05-04-08-00-00-06
   Power Management Mode   : DSL_G997_PMS_L0
   Test Mode               : DISABLE
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :        0 dB    Far SNR Margin       :        8  dB
   CO ITU Version[0]       : b5004244       CO ITU Version[1]    : 434da3f5
   DSLAM CHIPSET VENDOR    : < BDCM >


4223 posts

Uber Geek

Trusted

  # 1540850 23-Apr-2016 19:50
2 people support this post
Send private message

Quoting myself...

 

 

 

>Use the Chorus maps checker to check the speeds of people around your address...

 

Seriously.

 

 

 

N

 

 





--

 

Please note all comments are the product of my own brain and don't necessarily represent the position or opinions of my employer, previous employers, colleagues, friends or pets.


95 posts

Master Geek


  # 1540853 23-Apr-2016 19:55
Send private message

Chorus map says that next door should get 50 DL speeds


4223 posts

Uber Geek

Trusted

  # 1540854 23-Apr-2016 19:56
2 people support this post
Send private message

beaglenz:

 

Chorus map says that next door should get 50 DL speeds

 

 

The Chorus checker currently tells you what the neighbours ACTUALLY get as well as other options... So look at a few around you and see what the people on VDSL are getting. You'll see if you are out of step.

 

 

 

Cheers - N

 

 





--

 

Please note all comments are the product of my own brain and don't necessarily represent the position or opinions of my employer, previous employers, colleagues, friends or pets.


 
 
 
 


'That VDSL Cat'
11171 posts

Uber Geek

Trusted
Spark
Subscriber

  # 1540855 23-Apr-2016 19:57
Send private message

Based off your line stats there, thats a impressive sync tbh.

 

 

 

the 997 power mode print out on the vigor 130, is standard. even on 998.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


28352 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  # 1540858 23-Apr-2016 20:06
3 people support this post
Send private message

Every ISAM in the country has been migrated to 998 now.

 

 


8910 posts

Uber Geek

Lifetime subscriber

  # 1540867 23-Apr-2016 20:22
2 people support this post
Send private message

beaglenz:

 

Chorus map says that next door should get 50 DL speeds

 

 

is that the current speed of the potential speed? you need to be looking at the current speeds of the neighbours, the potential speed just means they can get VDSL.


2059 posts

Uber Geek

Subscriber

  # 1540880 23-Apr-2016 20:38
One person supports this post
Send private message

Give the DLM time to kick in. Mine improved a bit once it had settled down.




Geek girl. Freelance copywriter and editor at Unmistakable.co.nz.

 

Currently using: Modified 2008 Mac Pro, HP M6-1017TX Laptop, iPad Pro, iPhone 7, iPhone 6S, AppleTV4.


1828 posts

Uber Geek
Inactive user


  # 1541174 24-Apr-2016 14:54
Send private message

Talkiet:

 

Quoting myself...

 

 >Use the Chorus maps checker to check the speeds of people around your address...

 

Seriously.

 

 N

 

 

 

 

 

A house 4 closer to the cabinet than me gets 64Mbps (10 Salibury Ave) and yet a house (22 Salisbury Ave) 8 further away than me ( 14 Salisbury Ave) gets the same as me 40Mbps all that tells me is as soon as fiber is up here I'll be swapping quick smart


'That VDSL Cat'
11171 posts

Uber Geek

Trusted
Spark
Subscriber

  # 1541302 24-Apr-2016 18:52
One person supports this post
Send private message

Athlonite:

 

 

 

A house 4 closer to the cabinet than me gets 64Mbps (10 Salibury Ave) and yet a house (22 Salisbury Ave) 8 further away than me ( 14 Salisbury Ave) gets the same as me 40Mbps all that tells me is as soon as fiber is up here I'll be swapping quick smart

 

 

See now this is the problem with using that tool. only half the story is told.

 

 

 

in 6 houses along, i wouldnt expect 20mbit lost, but it is possible. Also could be a case of a borderline 17a vs peaking 8b (remember generally 17a runs at a higher snr and lower powerlevel so its less 'agressive' to account for the increases)





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


1828 posts

Uber Geek
Inactive user


  # 1541323 24-Apr-2016 19:19
Send private message

hio77:

 

Athlonite:

 

 

 

A house 4 closer to the cabinet than me gets 64Mbps (10 Salibury Ave) and yet a house (22 Salisbury Ave) 8 further away than me ( 14 Salisbury Ave) gets the same as me 40Mbps all that tells me is as soon as fiber is up here I'll be swapping quick smart

 

 

See now this is the problem with using that tool. only half the story is told.

 

 

 

in 6 houses along, i wouldnt expect 20mbit lost, but it is possible. Also could be a case of a borderline 17a vs peaking 8b (remember generally 17a runs at a higher snr and lower powerlevel so its less 'agressive' to account for the increases)

 

 

 

 

what would be better is if the map actually showed where the copper goes that you're connected to and it's only 4 houses and of the 3 between 1 doesn't have any bb services and the other two are on ADSL2+ so go figure and the socket on the wall in my place is directly connected to the outside line there is no point of entry in between it and the green box out front   


'That VDSL Cat'
11171 posts

Uber Geek

Trusted
Spark
Subscriber

  # 1541325 24-Apr-2016 19:28
One person supports this post
Send private message

Athlonite:

 

hio77:

 

Athlonite:

 

 

 

A house 4 closer to the cabinet than me gets 64Mbps (10 Salibury Ave) and yet a house (22 Salisbury Ave) 8 further away than me ( 14 Salisbury Ave) gets the same as me 40Mbps all that tells me is as soon as fiber is up here I'll be swapping quick smart

 

 

See now this is the problem with using that tool. only half the story is told.

 

 

 

in 6 houses along, i wouldnt expect 20mbit lost, but it is possible. Also could be a case of a borderline 17a vs peaking 8b (remember generally 17a runs at a higher snr and lower powerlevel so its less 'agressive' to account for the increases)

 

 

 

 

what would be better is if the map actually showed where the copper goes that you're connected to and it's only 4 houses and of the 3 between 1 doesn't have any bb services and the other two are on ADSL2+ so go figure and the socket on the wall in my place is directly connected to the outside line there is no point of entry in between it and the green box out front   

 

 

 

 

Good luck with that, MDF layouts arent even shown on CCM.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


1 | ... | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Switch your broadband provider now - compare prices


Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Microsoft launches first Experience Center worldwide for Asia Pacific in Singapore
Posted 13-Nov-2019 13:08


Disney+ comes to LG Smart TVs
Posted 13-Nov-2019 12:55


Spark launches new wireless broadband "Unplan Metro"
Posted 11-Nov-2019 08:19


Malwarebytes overhauls flagship product with new UI, faster engine and lighter footprint
Posted 6-Nov-2019 11:48


CarbonClick launches into Digital Marketplaces
Posted 6-Nov-2019 11:42


Kordia offers Microsoft Azure Peering Service
Posted 6-Nov-2019 11:41


Spark 5G live on Auckland Harbour for Emirates Team New Zealand
Posted 4-Nov-2019 17:30


BNZ and Vodafone partner to boost NZ Tech for SME
Posted 31-Oct-2019 17:14


Nokia 7.2 available in New Zealand
Posted 31-Oct-2019 16:24


2talk launches Microsoft Teams Direct Routing product
Posted 29-Oct-2019 10:35


New Breast Cancer Foundation app puts power in Kiwi women's hands
Posted 25-Oct-2019 16:13


OPPO Reno2 Series lands, alongside hybrid noise-cancelling Wireless Headphones
Posted 24-Oct-2019 15:32


Waikato Data Scientists awarded $13 million from the Government
Posted 24-Oct-2019 15:27


D-Link launches Wave 2 Unified Access Points
Posted 24-Oct-2019 15:07


LG Electronics begins distributing the G8X THINQ
Posted 24-Oct-2019 10:58



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.