Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




3791 posts

Uber Geek
+1 received by user: 1885

Lifetime subscriber

Topic # 191142 25-Jan-2016 15:36
Send private message

Like many other Geekzoners, I do a lot of speed testing.

 

I'm on "100/10 Mbps" HFC cable, which has had a lot of problems over the last 12 months (see Krapi Cable Congestion).

I often use the OOKLA speedtest (which uses Flash) as well as the nPerf speedtest (no Flash required). I'm also a TrueNet volunteer, so i have a third source of speed tests.

I find that OOKLA often gives much "better" (or more optimistic?) speeds than nPerf. eg downstream with OOKLA 101 Mbps vs nPerf 80 Mbps or less (both to fast Auckland servers).

 

In my experience, nPerf is closer to real-world performance (eg downloading a MS ISO) than OOKLA.

What is the experience of other Geekzoners?





Sideface


Create new topic
5417 posts

Uber Geek
+1 received by user: 231

Trusted
Geekzone
Subscriber

  Reply # 1478331 25-Jan-2016 15:36
Send private message

Hello... Our robot found some keywords in your post, so here is an automated reply with some important things to note regarding broadband speeds.

 

If you are posting regarding DSL speeds please check that

 

  • you have reset your modem and router 
  • your PC (or other PCs in your LAN) is not downloading large files when you are testing - you are not being throttled by your ISP due to going over the monthly cap 
  • your tests are always done on an ethernet connection to the router - do not use wireless for testing 
  • you read this topic and follow the instructions there.

Make sure you provide information for other users to help you. If you have not already done it, please EDIT your post and add this now:

 

  • Your ISP and plan 
  • Type of connection (ADSL, ADSL2, VDSL) 
  • Your modem DSL stats (do not worry about posting Speedtest, we need sync rate, attenuation and noise margin) 
  • Your general location (or street) 
  • If you are rural or urban 
  • If you know your connection is to an exchange, cabinet or conklin 
  • If your connection is to a ULL or wholesale service 
  • If you have done an isolation test as per the link above 

Most of the problems with speed are likely to be related to internal wiring issues. Read this discussion to find out more about this. Your ISP is not intentionally slowing you down today (unless you are on a managed plan). Also if this is the school holidays it's likely you will notice slower than usual speed due to more users online.

 

A master splitter is required for VDSL2 and in most cases will improve speeds on DSL connections. Regular disconnections can be a monitored alarm or a set top box trying to connect. If there's an alarm connected to your line even if you don't have an alarm contract it may still try to connect so it's worth checking.

 

I recommend you read these two blog posts:

 





I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.



5990 posts

Uber Geek
+1 received by user: 908

Trusted
Lifetime subscriber

  Reply # 1478362 25-Jan-2016 16:10
One person supports this post
Send private message

Ookla tends to measure the "last mile" of your connection due to its large network of servers. I'm not familiar with nPerf, but a service with fewer servers will probably be a better representation of the real world.


 
 
 
 


885 posts

Ultimate Geek
+1 received by user: 266

Trusted

  Reply # 1478438 25-Jan-2016 17:01
Send private message

Personally I think that cable network might actually get better. With Vodafone planning some upgrades and a lot of people who can get UFB opting to leave cable to take up UFB.

 

But yeh your speed test is as good as the last mile. Its a complicated kettle of fish, you might only get 10mbit to parts of the usa or europe, it depends who the ISP peers with, what paths the traffic takes and how much transit they have and their peering partners have at certain points across the web. 

 

You should get a speed close to what you are paying for to servers in NZ. And the difference between ookla and nperf will be so small.






3403 posts

Uber Geek
+1 received by user: 1816

Trusted
Spark NZ

  Reply # 1478440 25-Jan-2016 17:03
Send private message

Both give you a calculated estimate of maximum possible access speed - nothing more. Ookla in particular (speedtest.net) uses a non centrally tended subset of measures and then multiplies the result by a fudge factor before showing you the number.

 

Speedtest.net servers are also massively variable between sites. I have to say the Spark speedtest servers are probably the best in NZ (I can see the load on them and I can see the results for all tests run against them and even the Akl server shows a LOT of Gigatown users record speeds over 920Mbps).

 

I like nperf too, but all speedtests are optimistic and virtually never represent likely real world results, for one reason or another. (I include truenet results in this as well)

 

(I'm not saying any of the above aren't useful, but you can't compare them to each other because they measure different things, and you can't use them to estimate real world speeds)

 

 

 

Cheers - N

 

 




3791 posts

Uber Geek
+1 received by user: 1885

Lifetime subscriber

  Reply # 1483448 2-Feb-2016 12:18
Send private message

Talkiet: <snip>  Speedtest.net servers are also massively variable between sites. I have to say the Spark speedtest servers are probably the best in NZ ... 

 

I'm in Wellington on VF HFC cable (which suffers from evening congestion), and regularly test:

 

1. OOKLA speedtest to VF Wellington server - this tends to give the "fastest" result

 

2. OOKLA speedtest to Spark Auckland server - typically slightly slower than the VF Wellington server

 

3. nPerf to MyRepublic server in Auckland (the only NZ server used by nPerf) - slower than both of the OOKLA speedtest servers





Sideface


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand hits peak broadband data
Posted 18-Jan-2018 12:21


Amazon Echo devices coming to New Zealand early February 2018
Posted 18-Jan-2018 10:53


$3.74 million for new electric vehicles in New Zealand
Posted 17-Jan-2018 11:27


Nova 2i: Value, not excitement from Huawei
Posted 17-Jan-2018 09:02


Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52


NOW to deploy SD-WAN to regional councils
Posted 19-Dec-2017 19:46


Mobile market competition issues ComCom should watch
Posted 18-Dec-2017 10:52


New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.