Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




269 posts

Ultimate Geek
+1 received by user: 5


Topic # 191314 31-Jan-2016 20:25
Send private message

Hi, will probably just get a new modem, but the Technicolour 'I have out the back' has a single Gig LAN port which I can feed in to my Gig switch.

 

The later modem I use today (over ADSL but can do fibre as well) only has 100mb LAN ports.

 

Looks like the TG587 should do 400mb continuous over fibre and I probably will go to a 200mb plan. 

 

Should I have a go with the TG587 or just get a later device that has higher speed LAN ports?

 

Tx





Mark Ascroft
Wellington


Create new topic
5417 posts

Uber Geek
+1 received by user: 231

Trusted
Geekzone
Subscriber

  Reply # 1482426 31-Jan-2016 20:25
Send private message

Hello... Our robot found some keywords in your post, so here is an automated reply with some important things to note regarding broadband speeds.

 

If you are posting regarding DSL speeds please check that

 

  • you have reset your modem and router 
  • your PC (or other PCs in your LAN) is not downloading large files when you are testing - you are not being throttled by your ISP due to going over the monthly cap 
  • your tests are always done on an ethernet connection to the router - do not use wireless for testing 
  • you read this topic and follow the instructions there.

Make sure you provide information for other users to help you. If you have not already done it, please EDIT your post and add this now:

 

  • Your ISP and plan 
  • Type of connection (ADSL, ADSL2, VDSL) 
  • Your modem DSL stats (do not worry about posting Speedtest, we need sync rate, attenuation and noise margin) 
  • Your general location (or street) 
  • If you are rural or urban 
  • If you know your connection is to an exchange, cabinet or conklin 
  • If your connection is to a ULL or wholesale service 
  • If you have done an isolation test as per the link above 

Most of the problems with speed are likely to be related to internal wiring issues. Read this discussion to find out more about this. Your ISP is not intentionally slowing you down today (unless you are on a managed plan). Also if this is the school holidays it's likely you will notice slower than usual speed due to more users online.

 

A master splitter is required for VDSL2 and in most cases will improve speeds on DSL connections. Regular disconnections can be a monitored alarm or a set top box trying to connect. If there's an alarm connected to your line even if you don't have an alarm contract it may still try to connect so it's worth checking.

 

I recommend you read these two blog posts:

 





I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.



25827 posts

Uber Geek
+1 received by user: 5555

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1482534 1-Feb-2016 07:21
Send private message

First thing would be to decide on an ISP and whether they include CPE because most do and offer far better hardware than a 587. I'm also not aware of the TG587 supporting VLAN tagging (unless there is a hack from the CLI) so that's going to severly limit your ISP choices as well.


 
 
 
 


6935 posts

Uber Geek
+1 received by user: 3231

Moderator
Trusted
Lifetime subscriber

  Reply # 1482545 1-Feb-2016 07:48
Send private message

The TG587 was once offered by Spark in the Telecom days when UFB was a new thing. It is quite an old router and has a bad habit of choking on many connections. I honestly wouldn't recommend it especially if you're going towards 200mbit UFB.

 

There are far better routers out there - The Netcomm NF4V for example is quite a good router at a good pricepoint easily picked up for quite cheap off the likes of Trademe. There are others too. But, in your case it could just be worth going to an ISP like Spark or 2degrees who offer decent routers for free with their plans.





Michael Murphy | https://murfy.nz
Want to be with an epic ISP? Want $20 to join them too? Well, use this link to sign up to BigPipe!
The Router GuideCommunity UniFi Cloud Controller | Ubiquiti Edgerouter Tutorial


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand hits peak broadband data
Posted 18-Jan-2018 12:21


Amazon Echo devices coming to New Zealand early February 2018
Posted 18-Jan-2018 10:53


$3.74 million for new electric vehicles in New Zealand
Posted 17-Jan-2018 11:27


Nova 2i: Value, not excitement from Huawei
Posted 17-Jan-2018 09:02


Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52


NOW to deploy SD-WAN to regional councils
Posted 19-Dec-2017 19:46


Mobile market competition issues ComCom should watch
Posted 18-Dec-2017 10:52


New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.