Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


kdn



198 posts

Master Geek
+1 received by user: 6


# 210245 19-Mar-2017 16:34
4 people support this post
Send private message

Hi guys,

 

 

 

there is another very informative thread about the power supplies on these Chorus ONT boxes which helped me, so thought I would just share some information which may help others too.

 

When I moved into my apartment I was happy to find out there was an ONT already installed and we were ready to go for UFB, the day before my circuit was livened up, I only just realised that I had no power cable plugged into the ONT, I called my ISP and explained I had just moved in and the last tenants must have removed it etc, they advised me there would be a minimum $50 charge and a 2 week wait to get a tech out to replace it. Hrm yeah nah thanks mate.

 

First off, not all ONT boxes are the same so this may or may not help you. What we do know, the ONT is Alcatel/Lucent (surprise,surprise) and its a 12VDC, 1 amp.

 

Thanks to kenkeniff's post, after hanging up form the ISP I had mine powered up using breadboard jumpers and and old 12v PSU. But the connection wasn't stable, the ONT was sitting on the ground and a slight bump could knock the connectors out.

 

 

 

So here is how to make the real plug

 

what you need:

 

1x Molex 43025-0800

 

2x Molex 43030-0001 (they usually come in a set of 8)

 

1x 12VDC 1.0 Amp minimum wall plug (most op shops have boxes of these for $1 each)

 

 

 

Its fairly simple, cut the plug off the end of the wall plug, strip a tiny amount of sheath off the cable, insert it into the crimp terminal, the small ears at the bottom of the terminal crimp around the sheath, the larger ears of the terminal crimp around the bare wire, there is a proper tool for this but needle nose pliers and a bit of patience work well. If you can, get a wall plug that has 2x core wire, if you have single core with negative on the shielding it will be rather tricky to crimp - maybe a dob of solder will help out.

 

Get your multimeter and find out which is positive and which is negative, looking at the front face of the plug (the picture is looking from the other way), the negative terminal goes into the top left, and the positive goes into the bottom left. The Remaining 6 holes are not used.

 

Plug it in, it should be a perfect fit with a satisfying 'click' and your done. As you can see in the pictures, I chose the smallest wall plug I could and made the cable very short. Total cost was <$5

 

 

 

Click to see full size

 

Click to see full size

 

Click to see full size

 

Click to see full size

 

Click to see full size

 

 

 

 

 

 


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
'That VDSL Cat'
10203 posts

Uber Geek
+1 received by user: 2449

Trusted
Spark
Subscriber

  # 1743891 19-Mar-2017 16:41
Send private message

A few months back i handled a case exactly like this.

 

 

 

Process was, an email was sent out.

 

Within a few hours chorus came back letting us know the customer has had a PSU dispatched.

 

 

 

Within the next day the PSU arrived, problem solved. no charges or anything.

 

 

 

Chorus aren't so keen on you messing with the ONT..





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


1601 posts

Uber Geek
+1 received by user: 645


  # 1743932 19-Mar-2017 17:20
4 people support this post
Send private message

kdn:

 

I called my ISP and explained I had just moved in and the last tenants must have removed it etc, they advised me there would be a minimum $50 charge and a 2 week wait to get a tech out to replace it. Hrm yeah nah thanks mate.

 

 

Who's your ISP?

 

In the dozens of cases I've handled we just logged a fault and Chorus will replace the power supply the next day with no fee. Up until recently they even send a guy to install it for you, now they just courier it.


 
 
 
 


810 posts

Ultimate Geek
+1 received by user: 191
Inactive user


  # 1743937 19-Mar-2017 17:26
Send private message

I find it odd it uses an 8pin molex for two poles?

kdn



198 posts

Master Geek
+1 received by user: 6


  # 1743939 19-Mar-2017 17:28
Send private message

Unlimited Internet, but that shouldn't matter who it is, all they do is log it with Chorus, in my experience when someone quotes a $50 fee you generally end up paying it :)


'That VDSL Cat'
10203 posts

Uber Geek
+1 received by user: 2449

Trusted
Spark
Subscriber

  # 1743946 19-Mar-2017 17:39
Send private message

kdn:

 

Unlimited Internet, but that shouldn't matter who it is, all they do is log it with Chorus, in my experience when someone quotes a $50 fee you generally end up paying it :)

 

 

Chorus have a standard procedure here.

 

 

 

Unlimited internet need to look at their internal docs and make sure this is looked at, Customers should not be rigging up their own power supplies for something chorus will look after without a charge.

 

 

 

@ChorusNZ @InstallerUFB might have something more to add here..





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


22064 posts

Uber Geek
+1 received by user: 4683

Trusted
Subscriber

  # 1743983 19-Mar-2017 18:16
2 people support this post
Send private message

PaulBags: I find it odd it uses an 8pin molex for two poles?

 

If you look up the pinout its all to do with a backup power supply for them so it can monitor battery etc, AFAIK not used at all on the NZ installations of the ONTs, but I know that in aussie many installs have a battery and crap with them as well as a power supply.





Richard rich.ms

14759 posts

Uber Geek
+1 received by user: 2746

Trusted
Subscriber

  # 1743985 19-Mar-2017 18:19
One person supports this post
Send private message

Good on you for sharing. Another option is to buy a DC UPS made for it.


4779 posts

Uber Geek
+1 received by user: 2726

Trusted

  # 1743989 19-Mar-2017 18:24
Send private message

I was naughty and shortened the DC cord on my ONT power supply so it'd take up less room in my cabinet.


71 posts

Master Geek
+1 received by user: 17

Subscriber

  # 1743999 19-Mar-2017 19:00
Send private message

Can anyone tell me where I could get the Molex 43025-0800 plug and Molex 43030-0001 pins ?


588 posts

Ultimate Geek
+1 received by user: 188
Inactive user


  # 1744001 19-Mar-2017 19:09
Send private message

Great job @kdn I know it was a major payne last time I had to replace one of those.

Assume you had to spring for a bag of those connectors?

Maybe you could pre-crimp the rest of them to lengths of cable and/or wire on a female DC jack for easy connection to a universal power supply etc; and flick them off here?

I'd happily grab one off you for ten bucks or so to have as a spare [for *cough* definitely not a Chorus ONT]..

588 posts

Ultimate Geek
+1 received by user: 188
Inactive user


  # 1744009 19-Mar-2017 19:15
Send private message

shanes:

Can anyone tell me where I could get the Molex 43025-0800 plug and Molex 43030-0001 pins ?



Hopefully @kdn will save us the hassle and make some for us otherwise RS is your best bet:

https://nz.rs-online.com/mobile/p/pcb-connector-housings/2332775/

https://nz.rs-online.com/mobile/p/pcb-connector-contacts/6701850/

I'd also consider making up a batch if there's enough interest and they play nice with my existing crimps: http://www.engineer.jp/en/products/pa09e.html

615 posts

Ultimate Geek
+1 received by user: 32


  # 1744162 20-Mar-2017 00:27
Send private message

The power supply doesn't need to be exactly 1amp. Any switch mode psu will do as long as it's 12v and the current it can deliver is the same as or greater than 1amp. The ONT will draw whatever current it needs. Don't use an older transformer psu, often these have AC ripple on the output and could cause adverse problems with the ONT.

3727 posts

Uber Geek
+1 received by user: 1630

Subscriber

  # 1744167 20-Mar-2017 01:24
Send private message

gareth41: The power supply doesn't need to be exactly 1amp. Any switch mode psu will do as long as it's 12v and the current it can deliver is the same as or greater than 1amp. The ONT will draw whatever current it needs. Don't use an older transformer psu, often these have AC ripple on the output and could cause adverse problems with the ONT.

 

 

 

Safest way is to actually measure the no load voltage from your power supply, even if it is a switchmode one. I have seen transformer supplies that have a 7812 or lm317 regulator inside. So have given very stable output. Yet just today I opened up a 12V 6Amp switchmode PSU as I wanted to see if I could modify it's feedback resistors to get a little more voltage out of it. Turned out it's no load voltage was 15.6V And it didn't even have any active feedback network. It didn't even have an opamp or any ICs inside it. It was only approx 3 years old yet was made entirely from discrete components. The design brief was probably make it simulate a simple transformer supply.

 

 

 

Also I agree with having the Molex plugs on the ONTs. As I know someone who destroyed their modem by plugging the power supply from their inkjet printer into it. The printer PSU outputted 35V and the modem needed 12V. Goodbye modem.






201 posts

Master Geek
+1 received by user: 130

Trusted
Chorus

  # 1744212 20-Mar-2017 08:16
One person supports this post
Send private message

At least you have kindly documented the ONT serial number :)

The other guys are right.

 

1) should be no charge

 

2) should be a lot faster than 4 weeks.

 

 

 

Any non-official power supply causing issues with, or driving a replacement of, the ONT down the track could see you up for being charged for a replacement ONT.

 

 

 

 


kdn



198 posts

Master Geek
+1 received by user: 6


  # 1744308 20-Mar-2017 10:39
Send private message

I do have one spare molex and a bunch of the crimps if anyone is desperate for one, will sell for cost price.

 

There's a guy on ebay selling them in pairs with free shipping I think its the cheapest option!

 

 

 

 

 

 


 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Video game market in New Zealand passes half billion dollar mark
Posted 24-May-2019 16:15


WLG-X festival to celebrate creativity and innovation
Posted 22-May-2019 17:53


HPE to acquire supercomputing leader Cray
Posted 20-May-2019 11:07


Techweek starting around NZ today
Posted 20-May-2019 09:52


Porirua City Council first to adopt new council software solution Datascape
Posted 15-May-2019 12:00


New survey provides insight into schools' technology challenges and plans
Posted 15-May-2019 09:30


Apple Music now available on Alexa devices in Australia and New Zealand
Posted 15-May-2019 09:11


Make a stand against cyberbullying this Pink Shirt Day
Posted 14-May-2019 20:23


Samsung first TV manufacturer to launch the Apple TV App and Airplay 2
Posted 14-May-2019 20:11


Vodafone New Zealand sold
Posted 14-May-2019 07:25


Kordia boosts cloud performance with locally-hosted Microsoft Azure ExpressRoute
Posted 8-May-2019 10:25


Microsoft Azure ExpressRoute in New Zealand opens up faster, more secure internet for Kiwi businesses
Posted 8-May-2019 09:39


Vocus Communications to deliver Microsoft Azure Cloud Solutions through Azure ExpressRoute
Posted 8-May-2019 09:25


Independent NZ feature film #statusPending to premiere during WLG-X
Posted 6-May-2019 22:13


The ultimate dog photoshoot with Nokia 9 PureView #ForgottenDogsofInstagram
Posted 6-May-2019 09:41



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.