Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | ... | 44
1641 posts

Uber Geek
+1 received by user: 192

Subscriber

  Reply # 1777076 7-May-2017 10:39
Send private message

DSL active since:
6 days, 18 hours, 19 minutes
VDSL2 17a (ITU G.993.2)

 

Lost 10 mbits per second from my downstream connection as a result of this, presume the move to 17a has caused this?  Anyway I can get this back up?


499 posts

Ultimate Geek
+1 received by user: 22


  Reply # 1777091 7-May-2017 11:01
Send private message

No change here. I guess my line isnt up to it?

 

Line standard VDSL2
Downstream line rate (kbit/s) 36789
Upstream line rate (kbit/s) 5819
Downstream SNR (dB) 9.1
Upstream SNR (dB) 9
Downstream line attenuation (dB) 19.1
Upstream line attenuation (dB) 7.2
Downstream output power (dBmV) 18.6
Upstream output power (dBmV) 7
Downstream CRC 1650
Upstream CRC 17
Downstream FEC 289434
Upstream FEC 40


 
 
 
 


936 posts

Ultimate Geek
+1 received by user: 304

Trusted

  Reply # 1777139 7-May-2017 13:06
One person supports this post
Send private message

Torbay:

 

Went from:

 

51320/10616

 

To

 

58752/21336

 

A nice upload bump. And a bit of a bump for the download too.

 

On morning of Anzac Day.






593 posts

Ultimate Geek
+1 received by user: 76

Trusted
Lifetime subscriber

Reply # 1777170 7-May-2017 15:00
Send private message

hio77: Interesting to hear you are getting latency movements.

 

I have the same problem too.  Before ddDLM, I was on 70 down, 30 up, and INP of 0, delay of 0ms.

 

And this is now:

 

Bearers generic info DS US
Payload rate [Kbps]: 69994 22188
Attenuation [dB]: 7.0 3.4
Margins [dB]: 9.9 8.5
Output power [dBm]: 14.5 -1.5

 

Number of bearers: 1
Bearer 0 DS US
INP [DMT symbols]: 2.50 0.50
Delay [ms]: 7.00 8.00
Depth []: 1271 0.00
R: 12 0

 

 

 

Hence, so far, ddLDM's gift to me is 8mbps lost on upstream, and more delays.   yell




'That VDSL Cat'
9722 posts

Uber Geek
+1 received by user: 2266

Trusted
Spark
Subscriber

  Reply # 1777174 7-May-2017 15:03
Send private message

Give it time to settle in is all i can say...

So far not many lines have seen the gradual movements ddDLM is meant to do.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


593 posts

Ultimate Geek
+1 received by user: 76

Trusted
Lifetime subscriber

  Reply # 1777177 7-May-2017 15:05
Send private message

hio77: Give it time to settle in is all i can say...

So far not many lines have seen the gradual movements ddDLM is meant to do.

 

Yes, will leave it to settle.

 

By "gradual movements", do you mean one change daily at around 4am?


527 posts

Ultimate Geek
+1 received by user: 287


  Reply # 1777178 7-May-2017 15:06
Send private message

AKLWestie:

 

hio77: Interesting to hear you are getting latency movements.

 

I have the same problem too.  Before ddDLM, I was on 70 down, 30 up, and INP of 0, delay of 0ms.

 

And this is now:

 

Bearers generic info DS US
Payload rate [Kbps]: 69994 22188
Attenuation [dB]: 7.0 3.4
Margins [dB]: 9.9 8.5
Output power [dBm]: 14.5 -1.5

 

Number of bearers: 1
Bearer 0 DS US
INP [DMT symbols]: 2.50 0.50
Delay [ms]: 7.00 8.00
Depth []: 1271 0.00
R: 12 0

 

 

 

Hence, so far, ddLDM's gift to me is 8mbps lost on upstream, and more delays.   yell

 

 

Presumably you were on 17a before ddDLM and still on it afterwards? Interesting that you've lost some sync speed - what could be the reason for that? Could it be increased crosstalk from 8b lines switching to 17a, meaning more competition on parts of the spectrum you previously had more to yourself?

 

My line hasn't changed since a day or two after the switch. Hanging in there on 17a with 68/14, 8dB/8dB, and lots of interleaving.


593 posts

Ultimate Geek
+1 received by user: 76

Trusted
Lifetime subscriber

  Reply # 1777180 7-May-2017 15:16
Send private message

 

 

 

Presumably you were on 17a before ddDLM and still on it afterwards? Interesting that you've lost some sync speed - what could be the reason for that? Could it be increased crosstalk from 8b lines switching to 17a, meaning more competition on parts of the spectrum you previously had more to yourself?

 

My line hasn't changed since a day or two after the switch. Hanging in there on 17a with 68/14, 8dB/8dB, and lots of interleaving.

 

 

Yes I was on 17a before the change and maxed out the ikano card at 70 down / 30 up.  I don't think too many of my neighbours have VDSL so not too sure crosstalk getting worse on not.

 

Not that I am complaining.  What I have now is still pretty good and make no noticeable different prior to the change.


208 posts

Master Geek
+1 received by user: 17


  Reply # 1777273 7-May-2017 18:12
Send private message

Before
---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
Running Mode : 8B State : SHOWTIME
DS Actual Rate : 45556000 bps US Actual Rate : 8748000 bps
DS Attainable Rate : 45577152 bps US Attainable Rate : 8440000 bps
DS Path Mode : Fast US Path Mode : Fast
DS Interleave Depth : 0 US Interleave Depth : 0
NE Current Attenuation : 14 dB Cur SNR Margin : 11 dB
DS actual PSD : -6.-7 dB US actual PSD : 15. 3 dB
NE CRC Count : 0 FE CRC Count : 0
NE ES Count : 0 FE ES Count : 0
Xdsl Reset Times : 0 Xdsl Link Times : 3
ITU Version[0] : b5004946 ITU Version[1] : 544e0000
VDSL Firmware Version : 05-04-08-00-00-06
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 0 dB Far SNR Margin : 10 dB
CO ITU Version[0] : b500494b CO ITU Version[1] : 4e530001
DSLAM CHIPSET VENDOR : < IKNS >

 

After
---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
Running Mode : 8B State : SHOWTIME
DS Actual Rate : 44032000 bps US Actual Rate : 9688000 bps
DS Attainable Rate : 44057008 bps US Attainable Rate : 9416000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 0 US Interleave Depth : 0
NE Current Attenuation : 14 dB Cur SNR Margin : 11 dB
DS actual PSD : -6.-6 dB US actual PSD : 15. 3 dB
NE CRC Count : 0 FE CRC Count : 0
NE ES Count : 0 FE ES Count : 0
Xdsl Reset Times : 0 Xdsl Link Times : 4
ITU Version[0] : b5004946 ITU Version[1] : 544e0000
VDSL Firmware Version : 05-04-08-00-00-06
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 0 dB Far SNR Margin : 11 dB
CO ITU Version[0] : b500494b CO ITU Version[1] : 4e530001
DSLAM CHIPSET VENDOR : < IKNS >

 

 

 

but the ping goes up from 5ms to 20ms on speedtest now. So I guess mine didn't change much.


1641 posts

Uber Geek
+1 received by user: 192

Subscriber

  Reply # 1777284 7-May-2017 18:29
Send private message

I'm disappointed with the changes.  Currently syncing at a lower speed with higher latency, and a different profile and its been like this since last Sunday, very little evidence that the DSLAM has attempted to move the sync around.




'That VDSL Cat'
9722 posts

Uber Geek
+1 received by user: 2266

Trusted
Spark
Subscriber

  Reply # 1777423 7-May-2017 22:08
Send private message

AKLWestie:

hio77: Give it time to settle in is all i can say...

So far not many lines have seen the gradual movements ddDLM is meant to do.


Yes, will leave it to settle.


By "gradual movements", do you mean one change daily at around 4am?



Yes i do.

So far I've seen one vdsl line make per line value adjustments.

I'll post up a screenshot probably tomorrow of my line. I poll my modem and store data into an elk stack.

Had periods of 17a, dropping back to 8b.
For my line i very much agree with ddDLM that 8b is more ideal than 17a.

I would say tbough the two profiles preformed almost identically. Maybe a slight drop in upstream.
On paper i would have expected downstream to take a beating tbh.

Realty vs theoretical eh? Just a little example.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


87 posts

Master Geek
+1 received by user: 8


  Reply # 1778578 9-May-2017 15:56
One person supports this post
Send private message

Looks like my ADSL2 line was done early this morning, gone from 8.6/0.9 to 11.6/1

 

 


1641 posts

Uber Geek
+1 received by user: 192

Subscriber

  Reply # 1778685 9-May-2017 19:31
Send private message

So my VDSL line has still not improved 9 days later, still on 17a with loss of downstream and continued reduction in upstream.  Shame that this hasn't been an improvement in comparison to others.




'That VDSL Cat'
9722 posts

Uber Geek
+1 received by user: 2266

Trusted
Spark
Subscriber

  Reply # 1778701 9-May-2017 19:52
Send private message

Benoire:

 

So my VDSL line has still not improved 9 days later, still on 17a with loss of downstream and continued reduction in upstream.  Shame that this hasn't been an improvement in comparison to others.

 

 

give it more time to settle in is all i can say..

 

 

 

Don't try to force back down to 8b, I messed with that the other day... Totally broke my line somehow..

 

Still at a loss of what exactly happened unless it totally perfectly timed with a copper fault returning!





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


99 posts

Master Geek
+1 received by user: 32
Inactive user


  Reply # 1778703 9-May-2017 19:54
Send private message

eluSiveNZ:

 

Looks like my ADSL2 line was done early this morning, gone from 8.6/0.9 to 11.6/1

 

 

 

 

A 34% increase is nice! We are on 13.3/1 right now so that would see me jump to approx 17.5/1.1 I'd take that for free.


1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | ... | 44
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic


Donate via Givealittle


Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Huawei introduces the HUAWEI Watch GT to New Zealand
Posted 27-Mar-2019 11:09


Huawei unveils the P30 series
Posted 27-Mar-2019 05:13


Kordia announces recipient of inaugural Women in Technology Scholarship
Posted 26-Mar-2019 22:48


T&G Global and Abundant Robotics show first commercial robotic apple harvester
Posted 26-Mar-2019 21:34


Amazon introduces new Kindle with adjustable front light
Posted 21-Mar-2019 20:14


A call from the companies providing internet access for the great majority of New Zealanders, to the companies with the greatest influence over social media content
Posted 19-Mar-2019 15:21


Two e-scooter companies selected for Wellington trial
Posted 15-Mar-2019 17:33


GeForce GTX 1660 available now
Posted 15-Mar-2019 08:47


Artificial Intelligence to double the rate of innovation in New Zealand by 2021
Posted 13-Mar-2019 14:47


LG demonstrates smart home concepts at LG InnoFest
Posted 13-Mar-2019 14:45


New Zealanders buying more expensive smartphones
Posted 11-Mar-2019 09:52


2degrees Offers Amazon Prime Video to Broadband Customers
Posted 8-Mar-2019 14:10


D-Link ANZ launches D-Fend AC2600 Wi-Fi Router Protected by McAfee
Posted 7-Mar-2019 11:09


Slingshot commissions celebrities to design new modems
Posted 5-Mar-2019 08:58


Symantec Annual Threat Report reveals more ambitious, destructive and stealthy attacks
Posted 28-Feb-2019 10:14



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.