Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 | 5 | 6 | 7


231 posts

Master Geek
+1 received by user: 57


  Reply # 1804610 21-Jun-2017 13:13
Send private message

Update

 

36 hours after install
Battery this morning on way to work was on 12.4v (80%)
Not bad considering temp didn't go past 3deg yesterday and fogged in all day
Got some sun today, so should top up battery

 

Modem working flawlessly, radios doing their thing

Networking guru's, how do you access the radio's via the WAN port on router?
I can access the Modem in bridge mode on the WAN port with router (running Tomato Shibby)
Just haven't been able to access the radios, or can they be seen at all in this scenario ?
Any help here would be appreciated

 

I'll probably get back too late tonight to take photo's of the external setup.
But they are coming, tomorrow I may have a few seconds more of day light :)


5730 posts

Uber Geek
+1 received by user: 1688

Trusted

  Reply # 1804614 21-Jun-2017 13:22
One person supports this post
Send private message

@Hio77, i should have done this when i lived next to a cabinet but the cable pairs went on a 400M round trip to terminate directly next to that cabinet then go down my driveway. How ever i dont think Chorus would like a HG659 sitting on their mainframe haha. 





Steam: Coil (Same photos as profile here)
Origin: Scranax
Currently playing on PC: Rust, Subnautica, CS:GO, AOE2 HD, BeamNG Drive, BF1.


 
 
 
 


Try Wrike: fast, easy, and efficient project collaboration software
194 posts

Master Geek
+1 received by user: 55


  Reply # 1804615 21-Jun-2017 13:23
Send private message

What are the current IP addresses of the modem, router and radios? It won't take too much to sort out making all the devices visible. 




231 posts

Master Geek
+1 received by user: 57


  Reply # 1804620 21-Jun-2017 13:47
Send private message

Router DHCP's over 192.168.0.XXX, WAN put through 192.168.1.1 (DV130)
I made the Radio's 192.168.1.2 and .3 respectively (didn't work in the .0.XXX range either)


3343 posts

Uber Geek
+1 received by user: 1088

Trusted
Vocus

  Reply # 1804625 21-Jun-2017 13:58
Send private message

Awesome setup, just one question, why step voltage up to 24v and inject PoE rather than just plugging in the 12v input on the router directly?


'That VDSL Cat'
7761 posts

Uber Geek
+1 received by user: 1569

Trusted
Spark
Subscriber

  Reply # 1804630 21-Jun-2017 14:03
One person supports this post
Send private message

ubergeeknz:

 

Awesome setup, just one question, why step voltage up to 24v and inject PoE rather than just plugging in the 12v input on the router directly?

 

 

pretty sure in the first post it is indicated that the 24v PoE is for wifi bridge.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


3343 posts

Uber Geek
+1 received by user: 1088

Trusted
Vocus

  Reply # 1804635 21-Jun-2017 14:06
Send private message

hio77:

 

ubergeeknz:

 

Awesome setup, just one question, why step voltage up to 24v and inject PoE rather than just plugging in the 12v input on the router directly?

 

 

pretty sure in the first post it is indicated that the 24v PoE is for wifi bridge.

 

 

Ah :D makes sense!




231 posts

Master Geek
+1 received by user: 57


  Reply # 1804641 21-Jun-2017 14:16
One person supports this post
Send private message

Yup, Litebeam 24v POE running via 12-24v converter

 

DV130 running directly off battery (ie 12v)

 

 


'That VDSL Cat'
7761 posts

Uber Geek
+1 received by user: 1569

Trusted
Spark
Subscriber

  Reply # 1804662 21-Jun-2017 14:39
Send private message

MikeAqua:

 

So Chorus were happy for you to install gear in the roadside pillar?

 

 

i'd be interested in if there was any communication on this one too.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


3394 posts

Uber Geek
+1 received by user: 1140

Subscriber

  Reply # 1804667 21-Jun-2017 14:49
Send private message

hio77:

 

MikeAqua:

 

So Chorus were happy for you to install gear in the roadside pillar?

 

 

i'd be interested in if there was any communication on this one too.

 

 

I don't see why they would care. If you wanted to be extra legal beagle you would ask Chorus to make the changes to the service lead and the waterproof box would need an external Chorus ETP so they still have that demarcation.

 

 

 

Also, nice results on that radio link. Like you mentioned, maybe a little bit of fiddling to get the chains a bit more balanced.




231 posts

Master Geek
+1 received by user: 57


  Reply # 1804682 21-Jun-2017 15:09
Send private message

chevrolux:

 

hio77:

 

MikeAqua:

 

So Chorus were happy for you to install gear in the roadside pillar?

 

 

i'd be interested in if there was any communication on this one too.

 

 

I don't see why they would care. If you wanted to be extra legal beagle you would ask Chorus to make the changes to the service lead and the waterproof box would need an external Chorus ETP so they still have that demarcation.

 

 

I spoke with the local Chorus man about my idea, all he said was, 'do you need any Gel filled connectors', to which I replied, 'no I have these'
I'll get him to have a looksy when next up in area.

I'm working late tonight so no piccy to prove its not an eye sore.
I do own the land up to the road, and the cable to the house, I pay monthly fees and should something go wrong, fess up and take responsibility for it
I have no need to touch the cable again, I've got a spare battery should current run out of oomph in extended period of no sun
Also my disclaimer at the very beginning, not every site will be favourable to this, speak with Chorus first.


'That VDSL Cat'
7761 posts

Uber Geek
+1 received by user: 1569

Trusted
Spark
Subscriber

  Reply # 1804685 21-Jun-2017 15:16
One person supports this post
Send private message

freakngeek:

 

 

 

I spoke with the local Chorus man about my idea, all he said was, 'do you need any Gel filled connectors', to which I replied, 'no I have these'
I'll get him to have a looksy when next up in area.

 

 

 

ah sounds like a decent local tech then!





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.




231 posts

Master Geek
+1 received by user: 57


  Reply # 1804688 21-Jun-2017 15:20
Send private message

hio77:

 

ah sounds like a decent local tech then!

 

 

That he is, very helpful, known him for years


51 posts

Master Geek
+1 received by user: 4


  Reply # 1804764 21-Jun-2017 17:12
Send private message

freakngeek:

 

Router DHCP's over 192.168.0.XXX, WAN put through 192.168.1.1 (DV130)
I made the Radio's 192.168.1.2 and .3 respectively (didn't work in the .0.XXX range either)

 

 

 

 

So you're using the Draytek as a modem; and the Netgear as the router? I would have thought you'd use the Draytek as Modem+Router and then just used a switch in the house, making the two UBNT radios part of your 'internal' network - then they can just pickup DHCP addresses from the Draytek and be like any other device on your network.




231 posts

Master Geek
+1 received by user: 57


  Reply # 1804781 21-Jun-2017 18:17
Send private message

adimw: 

 

So you're using the Draytek as a modem; and the Netgear as the router? I would have thought you'd use the Draytek as Modem+Router and then just used a switch in the house, making the two UBNT radios part of your 'internal' network - then they can just pickup DHCP addresses from the Draytek and be like any other device on your network.

 

 

Had thought about that, but wasn't sure about everything getting sorted out by road and coming back again would do to performance


1 | 2 | 3 | 4 | 5 | 6 | 7
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Exhibition to showcase digital artwork from across the globe
Posted 23-May-2018 16:44


Auckland tops list of most vulnerable cities in a zombie apocalypse
Posted 23-May-2018 12:52


ASB first bank in New Zealand to step out with Garmin Pay
Posted 23-May-2018 00:10


Umbrellar becomes Microsoft Cloud Solution Provider
Posted 22-May-2018 15:43


Three New Zealand projects shortlisted in IDC Asia Pacific Smart Cities Awards
Posted 22-May-2018 15:14


UpStarters - the New Zealand tech and innovation story
Posted 21-May-2018 09:55


Lightbox updates platform with new streaming options
Posted 17-May-2018 13:09


Norton Core router launches with high-performance, IoT security in New Zealand
Posted 16-May-2018 02:00


D-Link ANZ launches new 4G LTE Dual SIM M2M VPN Router
Posted 15-May-2018 19:30


New Panasonic LUMIX FT7 ideal for outdoor: waterproof, dustproof
Posted 15-May-2018 19:17


Ryanair Goes All-In on AWS
Posted 15-May-2018 19:14


Te Papa and EQC Minecraft Mod shakes up earthquake education
Posted 15-May-2018 19:12


Framing Facebook: It’s not about technology
Posted 14-May-2018 16:02


Vocus works with NZ Police and telcos to stop scam calls
Posted 12-May-2018 11:12


Vista Group signs Aeon Entertainment, largest cinema chain in Japan
Posted 11-May-2018 21:41



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.