Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




7683 posts

Uber Geek
+1 received by user: 738

Subscriber

Topic # 56891 27-Jan-2010 19:59
Send private message

jhere is an old thread here about these.

http://www.geekzone.co.nz/forums.asp?forumid=49&topicid=16997

Does anyone have an updated source of these filters as I suspect the filter I have at home is on the way out.  Intermittently there is noise on the fone line.  When I unplug the ADSL router it goes away.  Have tried with two different routers.  Also I  have been getting frequent BB  disconnections since Sunday which I now put down to this as when it resets it's self the speed drops from 3.5meg to 1 meg untill the router is repowered.

 

Thanx in advance.

 




Regards,

Old3eyes


Create new topic


7683 posts

Uber Geek
+1 received by user: 738

Subscriber

  Reply # 293609 27-Jan-2010 20:03
Send private message

OK . I think I found one.
http://www.acquire.co.nz/acqui...

This the thing??




Regards,

Old3eyes


150 posts

Master Geek
+1 received by user: 12


  Reply # 293648 27-Jan-2010 21:39
Send private message

yeap that is the correct one. really good price too as I have seen it elsewhere for closer to $100!!

I am in the market for one of these once I get started rewiring the house.

 
 
 
 


8020 posts

Uber Geek
+1 received by user: 386

Trusted
Subscriber

  Reply # 293653 27-Jan-2010 21:48
Send private message

Might as well get the newer VDSL2 one, anyone with a trade account at a electrical supplier could probaly get you one for $40-50.



7683 posts

Uber Geek
+1 received by user: 738

Subscriber

  Reply # 294049 28-Jan-2010 18:31
Send private message

Thanx folks. I've ordered one so I sure hope this fixes the problem. If not I don't know where I'll go from here..




Regards,

Old3eyes


150 posts

Master Geek
+1 received by user: 12


  Reply # 294058 28-Jan-2010 18:51
Send private message

Didnt realise you could get VDSL ones.

Are these ADSL 2+ backwards compatible?

8020 posts

Uber Geek
+1 received by user: 386

Trusted
Subscriber

  Reply # 294064 28-Jan-2010 18:57
Send private message

Yes they are. 

I'm not entirely sure what is difference between the older ADSL master splitters and the newer VDSL ones is, presumably frequency range they handle is wider in the VDSL version or something like that.

I believe if you have the older ADSL version you will need to update to the newer VDSL capable version if/when VDSL becomes available.



7683 posts

Uber Geek
+1 received by user: 738

Subscriber

  Reply # 295254 1-Feb-2010 19:26
Send private message

Thanx for the replies.

The new filter sorted it. Been 3 days now. No noise on the fones and the ADSL has been solid with no disconnections. The only difference I have noticed is that speedtest now shows 3.2Mbits as before it was 3.5Mbits. I can live with that..




Regards,

Old3eyes


6041 posts

Uber Geek
+1 received by user: 159

Trusted

  Reply # 295256 1-Feb-2010 19:38
Send private message

The new VDSL2 filters are rated to 30MHz as opposed to 2.2MHz of the ADSL filter. They are totally backward compatible, so you can fit a new VDSL2 one even if you only going to use/get ADSL.

The new VDSL2 filters now have 3ports instead of the origianl 2ports. The green pair is the modem pair. In all VDSL2 filters I have seen to date the green(modem) pair is simply wired to the input (orange), so as yet none are providing a seperate HP section for the modem, if it should be needed.

Cheers
Cyril

150 posts

Master Geek
+1 received by user: 12


  Reply # 295276 1-Feb-2010 21:55
Send private message

Thanks Cyril. Looks like its time to open a trade account with mastertrade for the VDSL2 splitter and all of the other parts I need for my project.

I have heard from some that the best place to wire the VDSL2 splitter is at the demarc. I am just wondering if it is possible to put the splitter in the outside plastic demarc box so its there for easy access in future (well ladder access as its on roof eves)

I would then run cat5e from the demarc to the centralised coms cabinet. I assume using two pairs of the cable from the splitter for POTS and xDSL? (modem port output)

Thanks


6041 posts

Uber Geek
+1 received by user: 159

Trusted

  Reply # 295277 1-Feb-2010 22:05
Send private message

Hi, in the Demarc is one option and ideally the best, but if its inconvienient to put it in the ceiling space or under the floor is not a problem, the important thing is that the line that you latch into is a direct one from the demarc and has no taps or splits off to other circuits before the filter.

Ideally cat5/6 where possible, but cat3 or Ext2 (black external cable) is fine, its still of adequate performance compard to the multi pair from the exchange, the critical one is the clean non split line.

You are trying to implement a consistent transmission line between DSLAM and modem, with the POTs services in you house tapping in via the filter which will isolate any bad wiring on the voice/POTs side.

Cyril

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39


UAV Traffic Management Trial launching today in New Zealand
Posted 12-Dec-2017 16:06


UFB connections pass 460,000
Posted 11-Dec-2017 11:26


The Warehouse Group to adopt IBM Cloud to support digital transformation
Posted 11-Dec-2017 11:22


Dimension Data peeks into digital business 2018
Posted 11-Dec-2017 10:55


2018 Cyber Security Predictions
Posted 7-Dec-2017 14:55


Global Govtech Accelerator to drive public sector innovation in Wellington
Posted 7-Dec-2017 11:21


Stuff Pix media strategy a new direction
Posted 7-Dec-2017 09:37


Digital transformation is dead
Posted 7-Dec-2017 09:31


Fake news and cyber security
Posted 7-Dec-2017 09:27


Dimension Data New Zealand strengthens cybersecurity practice
Posted 5-Dec-2017 20:27


Epson NZ launches new Expression Premium Photo range
Posted 5-Dec-2017 20:26


Eventbrite and Twickets launch integration partnership in Australia and New Zealand
Posted 5-Dec-2017 20:23


New Fujifilm macro lens lands in New Zealand
Posted 5-Dec-2017 20:16



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.