Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




3496 posts

Uber Geek

Trusted

# 143526 17-Apr-2014 16:33
Send private message

Hey guys,
I've been running 4 displays for a while and its been great but i anted to add a 5th display. My computer has Intel HD 4000 graphics which drive 2 monitors and until recently had a NVidia Geforce 7300 which drove 2 more (has 2 monitor conenctions only). The Intel HD4000 can only support 2 monitors and my motherboard only has 1 pci-E slot so i could only replace it, not add another graphics card. I replaced the Geforce with it with an ATI HD 3600 I found which has a DVI, HDMI and displayport output. Unfortunately this card doesn't seem capable of driving more than 1-2 screens (you can't have more than 1 if you use display port it seems but 2 if you have 1 DVI and 1 HDMI).

Anyway any suggestions for a cheap card I could use to run the 5 screens?

I read this:
http://support.amd.com/en-us/search/faq/151

And can see a HD5 series card is $50 at Pbtech. Will this work?

I also am having a few issues with speed. Could having different video cards driving different displays cause this? Like ti gets a bit freezy etc.when scrolling around web pages.




Speedtest 2019-10-14


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
2635 posts

Uber Geek

Trusted
Lifetime subscriber

  # 1026987 17-Apr-2014 16:46
Send private message

What connection options are there on the card?  Would you have to daily-chain expensive DisplayPort monitors for example?

Options include adding a PCIe x1 card if you have a spare small PCIe slot, or a USB to VGA/DVI adapter for basic display requirements (i.e. no 1080p videos for USB3, or no videos at all for USB2)

Cheers
Mike






"4 wheels move the body.  2 wheels move the soul."

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams

2394 posts

Uber Geek

Trusted
Subscriber

  # 1026990 17-Apr-2014 16:49
Send private message

We use ATI HD5450's to drive three monitors in low profile cases. Just need to make sure you don't get the HDMI model as that can only do two monitors. The one we have has display port, DVI and VGA.

Card was around $60, and then another $50 for an active display port to DVI converter.

 
 
 
 




3496 posts

Uber Geek

Trusted

  # 1026995 17-Apr-2014 16:56
Send private message

yea its a mini-ITX case so only a single PCI-E slot. That's good advice, thanks Insane. Will order those I think.




Speedtest 2019-10-14




3496 posts

Uber Geek

Trusted

  # 1026996 17-Apr-2014 16:57
Send private message

Dynamic: What connection options are there on the card?  Would you have to daily-chain expensive DisplayPort monitors for example?

Options include adding a PCIe x1 card if you have a spare small PCIe slot, or a USB to VGA/DVI adapter for basic display requirements (i.e. no 1080p videos for USB3, or no videos at all for USB2)

Cheers
Mike




I have access to a heap of spare older monitors, not buying fresh ;)




Speedtest 2019-10-14




3496 posts

Uber Geek

Trusted

  # 1027026 17-Apr-2014 17:31
Send private message

Interesting I also see this card:
http://www.ascent.co.nz/productspecification.aspx?ItemID=422424

Its $86 but means you don't need an active display port adapter which is $35.




Speedtest 2019-10-14


1819 posts

Uber Geek

Trusted

  # 1027094 17-Apr-2014 20:06
Send private message

If you have USB 3 then you could add a USB3 graphics device or a USB3 PCI-E 1X to 16X port.

3403 posts

Uber Geek

Trusted

  # 1027156 18-Apr-2014 01:04
Send private message

A guy recently bought a 6 screen desktop custom built from our sister company which he plans to use for currency trading.

Anywhoo, the guy that built it reckoned he used a motherboard with 3x PCIe slots, and 3x dual head graphics cards all of the same make and model - so the drivers dont conflict.




Ray Taylor
Taylor Broadband (rural hawkes bay)
www.ruralkiwi.com

There is no place like localhost
For my general guide to extending your wireless network Click Here




 
 
 
 




3496 posts

Uber Geek

Trusted

  # 1027944 19-Apr-2014 21:39
Send private message

raytaylor: A guy recently bought a 6 screen desktop custom built from our sister company which he plans to use for currency trading.

Anywhoo, the guy that built it reckoned he used a motherboard with 3x PCIe slots, and 3x dual head graphics cards all of the same make and model - so the drivers dont conflict.


Hmm that's an interesting option. I had a look and there is an Intel motherboard with 2x pci-E x16 slots and PCI slots. I've got quite a few spare cards. I could put in 2x ATI HD4000 series and 1x Nvidia 6200 PCI (all of which I own) plus the 2x Intel for 8x total?




Speedtest 2019-10-14


2394 posts

Uber Geek

Trusted
Subscriber

  # 1027996 20-Apr-2014 00:37
Send private message

You can't use the internal and the PCI/pci-e at the same time, but nothing wrong with using both pci-e and PCI at the same time. On one workstation I'm doing exactly that to get three screens, ATI HD2400 + nVidia 6100 PCI, both low profile, and no problems with drivers.




3496 posts

Uber Geek

Trusted

  # 1028023 20-Apr-2014 06:58
Send private message

insane: You can't use the internal and the PCI/pci-e at the same time, but nothing wrong with using both pci-e and PCI at the same time. On one workstation I'm doing exactly that to get three screens, ATI HD2400 + nVidia 6100 PCI, both low profile, and no problems with drivers.



OK Good to hear... In my setup it seems you can use internal and PCI-E at the same time e.g. at the moment I'm using Intel HD 4000 off the motherboard for 2 monitors AND an ATI 3600. Now to find an ATX case that will fit on my desk - really want a minimalist Lian Li




Speedtest 2019-10-14


3403 posts

Uber Geek

Trusted

  # 1028081 20-Apr-2014 10:22
Send private message

Often being able to use onboard graphics depends upon the processor you use these days.

Also I have been using onboard + AGP or onboard + PCIe since the dawn of time.
Its usually just an option in the bios to enable it, often with the "which display to "prioritise" which will have three options along the lines of
- onboard
- pcie
- disable onboard




Ray Taylor
Taylor Broadband (rural hawkes bay)
www.ruralkiwi.com

There is no place like localhost
For my general guide to extending your wireless network Click Here






3496 posts

Uber Geek

Trusted

  # 1058434 3-Jun-2014 11:35
Send private message

Hey guys,
Lol forgot about this for a while but I now have 7 monitors on my desk with only 4 running :p. I need a solution which will scale so I think I will look at those USB3 adapters as you can seem to add as many as you want. Anyone using them? I presumably can run graphics intensive tasks on my main PCI-E GPU driven monitors while these things are running?




Speedtest 2019-10-14


5168 posts

Uber Geek

Trusted
Microsoft

  # 1058456 3-Jun-2014 12:10
Send private message

mDP1.2 monitors that support daisy chaining aren't expensive any more BTW

2635 posts

Uber Geek

Trusted
Lifetime subscriber

  # 1058459 3-Jun-2014 12:21
Send private message

Linking DisplayPort monitors together would be the nicest solution, but replacing several LCDs may be uneconomic.  Having said that buying muyltiple USB3 display adapters isn't dirt cheap either.

If you go down the USB3 route (which will play all but 1080p video IIRC) I would be interested to hear of any CPU use increase.  There is no harm connecting these to an older USB2 port or buying USB2 to VGA/DVI/HDMI, you'll just lose the ability to play anything resembling half-decent video.

There are a number of USB Port Replicators on the market that do dual display output - the HP 3005pr is one example that I have used recently.  Be sure to download the latest drivers, in my experience.




"4 wheels move the body.  2 wheels move the soul."

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams

5168 posts

Uber Geek

Trusted
Microsoft

  # 1058461 3-Jun-2014 12:25
Send private message

if you have a video card that supports the mDP1.2 MST for daisychaining but don't have the monitors that support it you can also buy a MST hub and use that between the monitors and PC

Personally I don't find USB2 / USB3 DisplayLink particularly reliable or stable

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Microsoft New Zealand Partner Awards results
Posted 18-Oct-2019 10:18


Logitech introduces new Made for Google keyboard and mouse devices
Posted 16-Oct-2019 13:36


MATTR launches to accelerate decentralised identity
Posted 16-Oct-2019 10:28


Vodafone X-Squad powers up for customers
Posted 16-Oct-2019 08:15


D Link ANZ launches EXO Smart Mesh Wi Fi Routers with McAfee protection
Posted 15-Oct-2019 11:31


Major Japanese retailer partners with smart New Zealand technology IMAGR
Posted 14-Oct-2019 10:29


Ola pioneers one-time passcode feature to fight rideshare fraud
Posted 14-Oct-2019 10:24


Spark Sport new home of NZC matches from 2020
Posted 10-Oct-2019 09:59


Meet Nola, Noel Leeming's new digital employee
Posted 4-Oct-2019 08:07


Registrations for Sprout Accelerator open for 2020 season
Posted 4-Oct-2019 08:02


Teletrac Navman welcomes AI tech leader Jens Meggers as new President
Posted 4-Oct-2019 07:41


Vodafone makes voice of 4G (VoLTE) official
Posted 4-Oct-2019 07:36


2degrees Reaches Milestone of 100,000 Broadband Customers
Posted 1-Oct-2019 09:17


Nokia 1 Plus available in New Zealand from 2nd October
Posted 30-Sep-2019 17:46


Ola integrates Apple Pay as payment method in New Zealand
Posted 25-Sep-2019 09:51



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.