Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




297 posts

Ultimate Geek
+1 received by user: 4


Topic # 220214 1-Aug-2017 00:36
Send private message quote this post

Yay! After 5 long years I've decided to upgrade my PC.
Long story short.
Old components:
Cooler Master mATX case
OCZ 600W PSU (OCZ600MXSP)
1 x SanDisk SSD
1 x WD HD
1 x EVGA Nvidia GeForce GTX 1060

New components
Ryzen 7 1700
Gigabyte AB350M-D3H
2 x 8GB G.Skill Flare-X F4-2400C
Crucial MX300 SSD

Outcome - power on, cooler led on, fans spinning, GPU fan starts-stops. Nothing else.
Funnily enough, power LED not turning on, HDD LED not active.

Took it back to PBtech assembled, they confirmed nothing wrong with my assembly, assumed mobo DOA and had it replaced. The new one was tested with my CPU but on a different machine, and had BIOS updated just in case, all in store. Worked just fine. Got home, reassembled - same story as before. Considering all the old components worked just fine in my previous setup, I suspect compatibility issues. Question is - which old component is the incompatible one.
Would appreciate any ideas, cause I'm at wits end.




Hello, Ground!

Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
558 posts

Ultimate Geek
+1 received by user: 28


  Reply # 1834630 1-Aug-2017 07:06
Send private message quote this post

Did pb test with your memory? If not that would be the first place I'd look. Ryzen is known to be particular regarding memory.

825 posts

Ultimate Geek
+1 received by user: 239

Trusted

  Reply # 1834643 1-Aug-2017 07:45
Send private message quote this post

You have to bios update for Ryzen. There were heaps of issues when it first came out. Most have been sorted.

 

Is your power supply new or old? I would check the Memory and PSU first. It could be as simple as changing the cables that come out of the PSU. You might have too much draw on a single power rail. 






 
 
 
 


315 posts

Ultimate Geek
+1 received by user: 40


  Reply # 1834647 1-Aug-2017 07:51
Send private message quote this post

Try using onboard with vid card in or vid card out...

 

You may have to go into the Bois settings and tell it to use onboad video as second choice.

 

 

 

Are there no beeps?

 

 

 

 


397 posts

Ultimate Geek
+1 received by user: 71


  Reply # 1834668 1-Aug-2017 08:42
Send private message quote this post

Try setting it up on a bench ie not in the case. and see how it runs.


825 posts

Ultimate Geek
+1 received by user: 239

Trusted

  Reply # 1834670 1-Aug-2017 08:45
One person supports this post
Send private message quote this post

Ryzen doesnt have a APU. So no on-board video will exist. You Must have a graphics card if you use Ryzen. But yes, you can try an old one, just to get the display sorted out.






4981 posts

Uber Geek
+1 received by user: 1391

Trusted

  Reply # 1834673 1-Aug-2017 08:50
Send private message quote this post

Try single stick of RAM and use onboard video with no HDD and see if you can POST. 
Otherwise alternate video card and other stick of ram, Try again.
Try not using the case power button, just short it with a screw driver. Maybe weird button? 

 

 






xpd

Runnin' and Gunnin'
8149 posts

Uber Geek
+1 received by user: 1043

Mod Emeritus
Trusted
Subscriber

  Reply # 1834704 1-Aug-2017 09:14
Send private message quote this post

A mate just built his Ryzen system last night, he found the RAM was extremely picky and had to tweak settings before it was running properly. Your old parts are fine, but as others have mentioned, start swapping them out for others in case one is on its way out etc.

 

 





XPD / @DemiseNZ / Gavin
 
Corsair Carbide SPEC-02 / Corsair VS550 / G.SKILL Ripjaws X 8GB / Zotac 760GTX AMP! / ASUS H81M-E / Intel Pentium K Anniversay G3258

 

Internet provided by : Voyager - VDSL 68/13  -  Musical Support by : Like A Storm - Visual Entertainment by : Plex and Steam and Overwatch


438 posts

Ultimate Geek
+1 received by user: 72


  Reply # 1834723 1-Aug-2017 09:38
Send private message quote this post

Id say Ram. the kit you have does not appear to be on the supported list. the Kit you have is likely this F4-2400C15D-16GFX? 

 

https://www.amd.com/system/files/2017-06/am4-motherboard-memory-support-list-en_0.pdf


46 posts

Geek
+1 received by user: 8


  Reply # 1834837 1-Aug-2017 11:34
Send private message quote this post

when you say "The new one was tested with my CPU but on a different machine, and had BIOS updated just in case" do you mean the Motherboard was updated to F3 BIOS ? 

 

This included all of the important RAM updates and AGESA 1.0.0.6 .. This board has probably been instock since launch so you need to find a way to update if they have not updated it to F3

 

https://www.gigabyte.com/Motherboard/GA-AB350M-D3H-rev-10#support-dl

 

 

 

If the board is up to date then I would do as others have suggested, look at the RAM and GPU. Remove all but CPU and 1x DDR4 (maybe get a lend of some other brands) and GPU (maybe try older lower powered GPU).


34 posts

Geek
+1 received by user: 16


  Reply # 1834845 1-Aug-2017 11:42
Send private message quote this post

So having recently built a R7 system and having similar issue here are a few things i know.

 

The Flare X range of RAM should be compatible (its specifically designed for Ryzen systems) but that does not mean you cant get a bad stick.

 

BIOS updates are crucial, I could only run my RAM at 2133 and boot until the bios was updated now i can use the 2400 speed.

 

If you can get into the BIOS turn off XMP profiles and see if you can boot (that was the key for me) and as others have mentioned don't both trying to use the "onboard" video it wont work you need a discrete GPU to get any display and boot.




297 posts

Ultimate Geek
+1 received by user: 4


  Reply # 1834933 1-Aug-2017 13:44
Send private message quote this post

Tk421nz:

 

So having recently built a R7 system and having similar issue here are a few things i know.

 

The Flare X range of RAM should be compatible (its specifically designed for Ryzen systems) but that does not mean you cant get a bad stick.

 

BIOS updates are crucial, I could only run my RAM at 2133 and boot until the bios was updated now i can use the 2400 speed.

 

If you can get into the BIOS turn off XMP profiles and see if you can boot (that was the key for me) and as others have mentioned don't both trying to use the "onboard" video it wont work you need a discrete GPU to get any display and boot.

 

 

That's what I thought RAM wise.

 

I can't get the board to post, so can't get into BIOS. But PBtech tell me they've updated the BIOS on this board, so I'm assuming the could get it to post.

 

I'm wondering if the video card has compatibility issues, and in absence of an onboard GPU it prevents the board from posting. Maybe need to update GPU BIOS?





Hello, Ground!

825 posts

Ultimate Geek
+1 received by user: 239

Trusted

  Reply # 1835001 1-Aug-2017 14:30
Send private message quote this post

If PB sold you the RAM and motherboard, then they should have checked the compatibility list. Did you just give them the motherboard back? Or did you drop in the whole PC?






4981 posts

Uber Geek
+1 received by user: 1391

Trusted

  Reply # 1835003 1-Aug-2017 14:33
Send private message quote this post

Kookoo:

 

Tk421nz:

 

So having recently built a R7 system and having similar issue here are a few things i know.

 

The Flare X range of RAM should be compatible (its specifically designed for Ryzen systems) but that does not mean you cant get a bad stick.

 

BIOS updates are crucial, I could only run my RAM at 2133 and boot until the bios was updated now i can use the 2400 speed.

 

If you can get into the BIOS turn off XMP profiles and see if you can boot (that was the key for me) and as others have mentioned don't both trying to use the "onboard" video it wont work you need a discrete GPU to get any display and boot.

 

 

That's what I thought RAM wise.

 

I can't get the board to post, so can't get into BIOS. But PBtech tell me they've updated the BIOS on this board, so I'm assuming the could get it to post.

 

I'm wondering if the video card has compatibility issues, and in absence of an onboard GPU it prevents the board from posting. Maybe need to update GPU BIOS?

 

 

 

 

I would take the board back to them before something happens to it or you have had it too long and its now your fault. Might be worth taking the CPU/MOBO/RAM combo in and seeing what the outcome is. One of them will be an Out Of Box Failure or the board just isnt functional. 








297 posts

Ultimate Geek
+1 received by user: 4


  Reply # 1835394 2-Aug-2017 09:01
Send private message quote this post

darylblake:

 

If PB sold you the RAM and motherboard, then they should have checked the compatibility list. Did you just give them the motherboard back? Or did you drop in the whole PC?

 

 

The whole PC.

 

Went there again, showed that the kit (mobo+CPU+RAM) doesn't post in my rig.

 

They showed that it does post in their rig.

 

Left it with them to look into it.





Hello, Ground!

4981 posts

Uber Geek
+1 received by user: 1391

Trusted

  Reply # 1835451 2-Aug-2017 09:59
Send private message quote this post

Kookoo:

 

darylblake:

 

If PB sold you the RAM and motherboard, then they should have checked the compatibility list. Did you just give them the motherboard back? Or did you drop in the whole PC?

 

 

The whole PC.

 

Went there again, showed that the kit (mobo+CPU+RAM) doesn't post in my rig.

 

They showed that it does post in their rig.

 

Left it with them to look into it.

 

 

 

 

How do you mean it works with their rig? Are they testing your Mobo with your CPU and your RAM with their components or just taking your RAM and CPU out and testing?
I think the fault points to the Mobo.






 1 | 2
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Public Wi-Fi plus cloud file sharing
Posted 18-Aug-2017 11:20


D-Link NZ launches professional Wireless AC Wave 2 Access Point for businesses
Posted 17-Aug-2017 19:25


Garmin introduces the Rino 700 five-watt two-way handheld radio
Posted 17-Aug-2017 19:04


Garmin announces the Foretrex 601 and Foretrex 701 Ballistic Edition for outdoor and tactical use
Posted 17-Aug-2017 19:02


Brightstar announces new distribution partnership with Samsung Knox platform in Australia
Posted 17-Aug-2017 17:07


Free gig-enabled WiFi network extends across Dunedin
Posted 17-Aug-2017 17:04


Samsung expands with connect Gear S3 Frontier
Posted 17-Aug-2017 15:55


Fact-checking Southern Cross Next cable is fastest to USA
Posted 17-Aug-2017 13:57


Thurrott says Microsoft Surface is dead last for reliability
Posted 16-Aug-2017 15:19


LibreOffice 5.4 works better with Microsoft Office files
Posted 16-Aug-2017 13:32


Certus launches Cognition
Posted 14-Aug-2017 09:31


Spark adds Cambridge, Turangi to 4.5G network
Posted 10-Aug-2017 17:55


REANNZ network to receive ongoing Government funding through to 2024
Posted 10-Aug-2017 16:05


Chorus backhaul starts with 2degrees
Posted 10-Aug-2017 15:49


New Zealanders cool on data analytics catching benefit fraud
Posted 10-Aug-2017 09:56



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.