Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




5 posts

Wannabe Geek


# 20944 10-Apr-2008 20:06
Send private message

     On connecting the USB to the host Device is detected and in Device Manager it shows “Microsoft USB Sync” type device.The DefaultClientDriver in Register for above case is “Serial_Class”.  When we change the DefaultClientDriver to “USBSER_Class”, after connecting with host it shows “Generic Serial” under the other devices in Device manager. Actually I want to connect device (WM 6.0) with windows XP through Active sync I don’t know which Register Entry I required out of (Serial_Class / USBSER_Class). I tried to connect with active sync 4.5 with both registry settings but it did not detect any device. Please guide me where I am missing or wrong. The registry setting which we are using is giving at the end of mail.  [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\USBFN]    "InterfaceType"=dword:0     ; Internal    "Prefix"="UFN"    "Dll"="usbfn.dll"    "Order"=dword:2    "Priority256"=dword:64    "MemBase"=dword:40600000   ; UDC_BASE_U_VIRTUAL    "MemLen"=dword:1000        ; Needs at least 0xE04. Round up to 1 page.    "Sysintr"=dword:1a    "BusIoctl"=dword:2a0048    "IClass"=multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b"    "ForceFullSpeed"=dword:1        [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]   "DefaultClientDriver"=- ; erase previous default [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]   "DefaultClientDriver"=" Serial_Class" [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Serial_Class]   "Dll"="serialusbfn.dll"   "DeviceName"="USBFNS1:"   "Prefix"="COM"   "DeviceArrayIndex"=dword:0   "RxBufferSize"=dword:4000   "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}"; idVendor must be changed. 045E belongs to Microsoft and is only to be used for; prototype devices in your labs. Visit http://www.usb.org to obtain a vendor id.   "idVendor"=dword:045E   "Manufacturer"="Generic Manufacturer (PROTOTYPE--Remember to change idVendor)"   "idProduct"=dword:00ce   "Product"="Generic Serial (PROTOTYPE--Remember to change idVendor)"   "bcdDevice"=dword:0   "Tsp"="Unimodem.dll"   "DeviceType"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\USBSER_Class]   "Dll"="serialusbfn.dll"   "DeviceName"="USBFNS2:"   "Prefix"="COM"   "DeviceArrayIndex"=dword:0   "RxBufferSize"=dword:4000   "IClass"=multi_sz:"{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}","{C375C787-B721-4b8e-B67F-A112D5C0A404}"; idVendor must be changed. 045E belongs to Microsoft and is only to be used for; prototype devices in your labs. Visit http://www.usb.org to obtain a vendor id.   "idVendor"=dword:045E   "Manufacturer"="Generic Manufacturer (PROTOTYPE--Remember to change idVendor)"   "idProduct"=dword:0079   "Product"="Generic Serial (PROTOTYPE--Remember to change idVendor)"   "bcdDevice"=dword:90   "Tsp"="Unimodem.dll"   "DeviceType"=dword:0 [HKEY_LOCAL_MACHINE\Comm\USB\Linkage]    "Bind"=multi_sz:"USBFNSER1" [HKEY_LOCAL_MACHINE\Comm\USBFNSER]   "DisplayName"="USB Driver"   "Group"="Serial"   "ImagePath"="serialusbfn.dll" [HKEY_LOCAL_MACHINE\Comm\USBFNSER\Linkage]   "Route"=multi_sz:"USBFNSER1"      [HKEY_LOCAL_MACHINE\Comm\DefaultConnections]            "USBDefault"=multi_sz:"USB cable","115200"    ;Default Connect id    [HKEY_CURRENT_USER\ControlPanel\Comm]"AutoCnct"=dword:00000001"Cnct"="USBDefault" ENDIF BSP_NOSPI !

Create new topic
2483 posts

Uber Geek

Trusted

  # 122671 10-Apr-2008 20:52
Send private message

Whoa...

Could you paragraph your post?

It's really hard to read, and might not really help you.




Find me on Twitter!

I posted 1, 2 x 10^3 times!



5 posts

Wannabe Geek


  # 122698 10-Apr-2008 21:59
Send private message


sorry sir it was my mistake.......
 
    On connecting the USB to the host Device is detected and in Device Manager it shows “Microsoft USB Sync” type device.The DefaultClientDriver in Register for above case is “Serial_Class”.
 When we change the DefaultClientDriver to “USBSER_Class”, after connecting with host it shows “Generic Serial” under the other devices in Device manager.
 Actually I want to connect device (WM 6.0) with windows XP through Active sync I don’t know which Register Entry I required out of (Serial_Class / USBSER_Class). I tried to connect with active sync 4.5 with both registry settings but it did not detect any device.
 Please guide me where I am missing or wrong.
 The registry setting which we are using is giving :
 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\USBFN]
    "InterfaceType"=dword:0     ; Internal
    "Prefix"="UFN"
    "Dll"="usbfn.dll"
    "Order"=dword:2
    "Priority256"=dword:64
    "MemBase"=dword:40600000   ; UDC_BASE_U_VIRTUAL
    "MemLen"=dword:1000        ; Needs at least 0xE04. Round up to 1 page.
    "Sysintr"=dword:1a
    "BusIoctl"=dword:2a0048
    "IClass"=multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}
=%b"
    "ForceFullSpeed"=dword:1
        [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
   "DefaultClientDriver"=- ; erase previous default
 
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
   "DefaultClientDriver"=" Serial_Class"
 
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Serial_Class]
   "Dll"="serialusbfn.dll"
   "DeviceName"="USBFNS1:"
   "Prefix"="COM"
   "DeviceArrayIndex"=dword:0
   "RxBufferSize"=dword:4000
   "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}"
; idVendor must be changed. 045E belongs to Microsoft and is only to be used for
; prototype devices in your labs. Visit http://www.usb.org to obtain a vendor id.
   "idVendor"=dword:045E
   "Manufacturer"="Generic Manufacturer (PROTOTYPE--Remember to change idVendor)"
   "idProduct"=dword:00ce
   "Product"="Generic Serial (PROTOTYPE--Remember to change idVendor)"
   "bcdDevice"=dword:0
   "Tsp"="Unimodem.dll"
   "DeviceType"=dword:0
 
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\USBSER_Class]
   "Dll"="serialusbfn.dll"
   "DeviceName"="USBFNS2:"
   "Prefix"="COM"
   "DeviceArrayIndex"=dword:0
   "RxBufferSize"=dword:4000
   "IClass"=multi_sz:"{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}","{C375C787-B721-4b8e-B67F-A112D5C0A404}"
; idVendor must be changed. 045E belongs to Microsoft and is only to be used for
; prototype devices in your labs. Visit http://www.usb.org to obtain a vendor id.
   "idVendor"=dword:045E
   "Manufacturer"="Generic Manufacturer (PROTOTYPE--Remember to change idVendor)"
   "idProduct"=dword:0079
   "Product"="Generic Serial (PROTOTYPE--Remember to change idVendor)"
   "bcdDevice"=dword:90
   "Tsp"="Unimodem.dll"
   "DeviceType"=dword:0
 
[HKEY_LOCAL_MACHINE\Comm\USB\Linkage]
    "Bind"=multi_sz:"USBFNSER1"
 
[HKEY_LOCAL_MACHINE\Comm\USBFNSER]
   "DisplayName"="USB Driver"
   "Group"="Serial"
   "ImagePath"="serialusbfn.dll"
 
[HKEY_LOCAL_MACHINE\Comm\USBFNSER\Linkage]
   "Route"=multi_sz:"USBFNSER1"
  
  
[HKEY_LOCAL_MACHINE\Comm\DefaultConnections]
            "USBDefault"=multi_sz:"USB cable","115200" 

;Default Connect id 

[HKEY_CURRENT_USER\ControlPanel\Comm]
"AutoCnct"=dword:00000001
"Cnct"="USBDefault"
 
ENDIF BSP_NOSPI !


 
 
 
 


BDFL - Memuneh
64852 posts

Uber Geek

Administrator
Trusted
Geekzone
Lifetime subscriber

  # 122709 10-Apr-2008 22:15
Send private message

Are you developing something? Is this a new Windows Mobile device?

Why this is not changed?


; idVendor must be changed. 045E belongs to Microsoft and is only to be used for
; prototype devices in your labs. Visit http://www.usb.org to obtain a vendor id.
   "idVendor"=dword:045E
   "Manufacturer"="Generic Manufacturer (PROTOTYPE--Remember to change idVendor)"
   "idProduct"=dword:00ce
   "Product"="Generic Serial (PROTOTYPE--Remember to change idVendor)"






5 posts

Wannabe Geek


  # 122711 10-Apr-2008 22:20
Send private message

yes sir i am developing function controller driver for WM6.0. it is just in prototype stage. with that i am tring to connect device
with host. so that i can use active sync but the problem is Active Sync does not detect any device but it is shown in device manager. as i explained. for testing purpose i am using the vendor id and product id. so please guide me where i am missing...

Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Chorus to launch Hyperfibre service
Posted 18-Nov-2019 15:00


Microsoft launches first Experience Center worldwide for Asia Pacific in Singapore
Posted 13-Nov-2019 13:08


Disney+ comes to LG Smart TVs
Posted 13-Nov-2019 12:55


Spark launches new wireless broadband "Unplan Metro"
Posted 11-Nov-2019 08:19


Malwarebytes overhauls flagship product with new UI, faster engine and lighter footprint
Posted 6-Nov-2019 11:48


CarbonClick launches into Digital Marketplaces
Posted 6-Nov-2019 11:42


Kordia offers Microsoft Azure Peering Service
Posted 6-Nov-2019 11:41


Spark 5G live on Auckland Harbour for Emirates Team New Zealand
Posted 4-Nov-2019 17:30


BNZ and Vodafone partner to boost NZ Tech for SME
Posted 31-Oct-2019 17:14


Nokia 7.2 available in New Zealand
Posted 31-Oct-2019 16:24


2talk launches Microsoft Teams Direct Routing product
Posted 29-Oct-2019 10:35


New Breast Cancer Foundation app puts power in Kiwi women's hands
Posted 25-Oct-2019 16:13


OPPO Reno2 Series lands, alongside hybrid noise-cancelling Wireless Headphones
Posted 24-Oct-2019 15:32


Waikato Data Scientists awarded $13 million from the Government
Posted 24-Oct-2019 15:27


D-Link launches Wave 2 Unified Access Points
Posted 24-Oct-2019 15:07



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.