Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




4 posts

Wannabe Geek


Topic # 5126 30-Sep-2005 07:44
Send private message

Hey.... I just picked up a new motorola v3 and I want to connect my ipaq hx2410 to the internet through it via bluetooth.

My provider is Rogers, and i picked up a cell internet plan....

Anyhow, I can surf the net etc on the cell phone fine via GPRS, but I can't see to get to the net via my ipaq.

I've tried creating a connection on the ipaq:

using the number *99#, username wapuser1, pwd wap, and entered +cgdcont=1,"IP","internet.com" in the 'extra dial-string modem commands'

My ipaq will establish a connection with my v3, but then the connection will fail.

I've also tried using the BT Phone Manager to set up a connection:

-I selected the GPRS network
- for the APN i entered +cgdcont=1,"IP","internet.com"
- Username wapuser1
- pwd wap
- and left the defaults for the rest, ie) dynamic ip etc.
- for the communication device I have it as generic/generic/bluetooth dailup modem, b/c my v3 phone is not in the list.
- for the network operator, I have Rogers wierless(ca)

When I kick this off, it will open a port... I accept the connection on the v3, then as it is loading the GPRS settings, it just fails, and goes back to the BT Phone Manager screen with a status of disconnected.

Please help!

Thanks

Create new topic
BDFL - Memuneh
58505 posts

Uber Geek
+1 received by user: 9948

Administrator
Trusted
Geekzone
Subscriber

Reply # 20777 30-Sep-2005 08:51
Send private message

Try adding Z; to the begining of the Init String - this is a reset command and most Motorola phones need this these days.

Also, check with your operator to see if your account is correctly configured to use GPRS.







4 posts

Wannabe Geek


  Reply # 20829 30-Sep-2005 12:23
Send private message

Hey... thanks... but no luck with that.

I was fooling around and put the connect string in front of the *99# and my phone came up, please wait.. then said 'not available'... that was the most 'exciting' thing I seen since I started playing around with this.

I'll try to get a hold of rogers, to verify my account, but I can surf the web on my phone over gprs, so .... it seems like it's active.

any other thoughts?

 
 
 
 


BDFL - Memuneh
58505 posts

Uber Geek
+1 received by user: 9948

Administrator
Trusted
Geekzone
Subscriber

Reply # 20841 30-Sep-2005 16:26
Send private message

The Z; should be entered on the appropriate Init String field, in the [Advanced] settings of your connection. You should not change the dial number from *99# (or *99***[x]# where [x] is the configuration id on your phone).







4 posts

Wannabe Geek


  Reply # 20861 1-Oct-2005 08:39
Send private message

Hey...

I did try the Z; in front of the init string, but that didn't work either. I'm waiting to hear back from motorola to see if there are any drivers that I might require to use this phone as a modem....

Rogers sent me a doc on how to set up bluetooth access etc... with the init strings, user id's passwords... but the only thing that it talks about that am unsure about is.. getting drivers from motorola.

I'm waiting to hear back from motorola to see if there are any drivers that I might require to use this phone as a modem.... I'll let keep you posted.





4 posts

Wannabe Geek


  Reply # 20866 1-Oct-2005 09:27
Send private message

Hey...

No luck. They ended up just referring me to BVRP.com

Not sure what else I can tell you guys...

Unless I'm supposed to have an 'data' package on my phone instead of an 'internet' package?

I know the phone is trying to get out, b/c I get interference on my monitor... (ya... it's common wit motorola's) Here's what I see:

Select my 'rogers' connection

Motorola Phone: Dial-up
Connection Established

Connecting: rogers
Dialing From: Cell
Using: Bluetooth dialup modem
Dialing: *99#

-Then-

Cannot Connect
Dialed: *99#
The answering modem has disconnected. To check your connection settings and change them if needed, tap Settings

Bluetooth Manager: The connection cailed and could not be reestablished

One thing that strikes me as odd is, the motorola doesn't show up as a 'phone' when trying to pair the device... I have to select "All Devices" in order to see it.

Any other thoughts?

2 posts

Wannabe Geek


Reply # 22228 28-Oct-2005 10:23
Send private message

Please see the bluetooth forum. I have added instructions on how to perform this task there.

BDFL - Memuneh
58505 posts

Uber Geek
+1 received by user: 9948

Administrator
Trusted
Geekzone
Subscriber

Reply # 22230 28-Oct-2005 10:43
Send private message

The instructions posted are for dialup to ISP, but this thread is about GPRS.





Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Public Wi-Fi plus cloud file sharing
Posted 18-Aug-2017 11:20


D-Link NZ launches professional Wireless AC Wave 2 Access Point for businesses
Posted 17-Aug-2017 19:25


Garmin introduces the Rino 700 five-watt two-way handheld radio
Posted 17-Aug-2017 19:04


Garmin announces the Foretrex 601 and Foretrex 701 Ballistic Edition for outdoor and tactical use
Posted 17-Aug-2017 19:02


Brightstar announces new distribution partnership with Samsung Knox platform in Australia
Posted 17-Aug-2017 17:07


Free gig-enabled WiFi network extends across Dunedin
Posted 17-Aug-2017 17:04


Samsung expands with connect Gear S3 Frontier
Posted 17-Aug-2017 15:55


Fact-checking Southern Cross Next cable is fastest to USA
Posted 17-Aug-2017 13:57


Thurrott says Microsoft Surface is dead last for reliability
Posted 16-Aug-2017 15:19


LibreOffice 5.4 works better with Microsoft Office files
Posted 16-Aug-2017 13:32


Certus launches Cognition
Posted 14-Aug-2017 09:31


Spark adds Cambridge, Turangi to 4.5G network
Posted 10-Aug-2017 17:55


REANNZ network to receive ongoing Government funding through to 2024
Posted 10-Aug-2017 16:05


Chorus backhaul starts with 2degrees
Posted 10-Aug-2017 15:49


New Zealanders cool on data analytics catching benefit fraud
Posted 10-Aug-2017 09:56



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.