Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




113 posts

Master Geek
+1 received by user: 12


# 106331 22-Jul-2012 16:36
Send private message

I am rewiring network etc throughout the house since we're having to Jib some rooms.

Will be using PDL 600 wall plates.

On looking at the RJ-45 keystone jacks I see there are a wide variation in prices.

PDL Cat5 Module from Electrical Direct LTD at $11.64+GST and $1.17+GST for the Cat6 Keystone Clip Module.
Argent Cables for $4.85
ComputerStore for $4.65+GST
Dynamix from Elive for $12.30
Dynamix from CablesDirect for $5.58+GST
PBTech for $3.50+GST
Digitus from Ascent for $9.19 and $5 by the time you buy 10

They all seem like the same keystone modules to me, all Cat 6 Jacks and you still need to get the Keystone Clip to mount to the PDL 600 Cover Plate.  I know I like the PDL Keystone Clip Mount already as they are slightly recessed and don't stick out like others I have seen.

I assume all these keystone modules fit?  Does anyone know if there is any quality difference between the different modules or is it just high prices for the same thing.  Considering I'm wanting 30 or so, the difference in total cost is a bit.

Edit:Part of post got lost

Create new topic
2233 posts

Uber Geek
+1 received by user: 982

Trusted
Subscriber

  # 659961 22-Jul-2012 17:04
Send private message

I use a few PDL Keystones with Dynamix CAT6 modules (the ones PB sell). They work fine, just don't put too much pressure on them when you punch down onto them.

22255 posts

Uber Geek
+1 received by user: 4781

Trusted
Subscriber

  # 659976 22-Jul-2012 17:33
Send private message

The PDL keystone adapter and a keystone is IMO the worst wall outlet ever, since the keystone is moved further into the wall you are lifting the end of the release tab, and it flexes rather than lift the catch up enough to actually release. The recess just makes it even worse.




Richard rich.ms

 
 
 
 


5469 posts

Uber Geek
+1 received by user: 2543

Trusted
Lifetime subscriber

  # 659980 22-Jul-2012 17:39
Send private message

I usually use the Dynamix modules: however I do quite like the PDL modules and would favour these for some jobs. I would also use them exclusively if price was a bit closer.




Chorus has spent $1.4 billion on making their xDSL broadband network faster and even more now as they are upgrading their rural Conklins. If your still stuck on ADSL or VDSL, why not spend $195 on a master filter install to make sure you are getting the most out of your connection?
I install - Naked DSL, DSL Master Splitters, VoIP, data cabling and general computer support for home and small business.
Rural Broadband RBI installer for Ultimate Broadband and Full Flavour

 

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com


4068 posts

Uber Geek
+1 received by user: 1765

Subscriber

  # 660031 22-Jul-2012 19:41
Send private message

richms: The PDL keystone adapter and a keystone is IMO the worst wall outlet ever, since the keystone is moved further into the wall you are lifting the end of the release tab, and it flexes rather than lift the catch up enough to actually release. The recess just makes it even worse.


The PDL keystone adapters don't recess that jack that much at all. You might be thinking about the PDL mod-clip adapter which allows 'clipsal' modules to be placed in the PDL plate. This recesses the jack so far you need a pen to release the patch cord.

My recommendation for a good quality, cheap module would be the dynamix modules in a PDL wall plate with keystone clips.

In a commercial building we use Molex modules which are about $15/ea. The only reason we use this is as we can offer a 50-year warranty on the cabling. The ministry of ed require certification too. However, we can wire up a building and not certify it and get exactly the same results with half the cost.

22255 posts

Uber Geek
+1 received by user: 4781

Trusted
Subscriber

  # 660066 22-Jul-2012 21:15
Send private message

chevrolux:

The PDL keystone adapters don't recess that jack that much at all. You might be thinking about the PDL mod-clip adapter which allows 'clipsal' modules to be placed in the PDL plate. This recesses the jack so far you need a pen to release the patch cord.


Nahh, seen those and they are hopeless for that. This is the PDL adapter to a keystone where it has a RJ45 shaped hole in the front that lines up with the one on the keystone.

The ones with a rectangle hole on the front dont suffer the problem, but with those the keystone is really really loose in them and I havent seen them without a goofy lip on one side of them either. Plus they look really ugly with the holes around the keystone etc.




Richard rich.ms



113 posts

Master Geek
+1 received by user: 12


  # 666811 3-Aug-2012 11:29
Send private message

Thanks for all the comments. I ended up going to the Dynamix ones as when buying 40 it's a lot cheaper than PDL ones. Got them through Ascent, once the multiple items discount kicked in it was cheaper than CablesDirect price which was without GST and shipping.

My only comment on the Dynamix ones is that they don't have the ability to have the cable come out the back or top due to the hole in the cover that goes over the punch down points which the PDL has. Also the Dynamix cover just rests on the punch down joints, it doesn't clip like the PDL. So when put in wall the cable can lift it off. A piece of insulation tape will deal to this but with comparison in price, I am accepting this problem.

In terms of plugging unplugging from the socket when they are slightly recessed, I don't have any problem releasing the clip of the RJ45 plug. Plus it's not like I'll be taking the cables in/out much.

4839 posts

Uber Geek
+1 received by user: 2770

Trusted

  # 666978 3-Aug-2012 13:53
Send private message

I went for the PDL network modules when I was networking our house. I was able to get them at trade price. I'd think twice if I had to pay retail; which is about $36 + GST I think.




Whatifthespacekeyhadneverbeeninvented?


 
 
 
 


4839 posts

Uber Geek
+1 received by user: 2770

Trusted

  # 667791 5-Aug-2012 14:55
Send private message

Ah scratch the above. My 2011 PDL price guide has them at $18.40 for the 619MD ex GST.

We got the whole house redone with PDL 600 series with stainless steel covers. Looks good. Laughing




Whatifthespacekeyhadneverbeeninvented?


Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand government unveils new digital service to make business easier
Posted 16-Jul-2019 17:35


Scientists unveil image of quantum entanglement
Posted 13-Jul-2019 06:00


Hackers to be challenged at University of Waikato
Posted 12-Jul-2019 21:34


OPPO Reno Z now available in New Zealand
Posted 12-Jul-2019 21:28


Sony introduces WF-1000XM3 wireless headphones with noise cancellation
Posted 8-Jul-2019 16:56


Xero announces new smarter tools, push into the North American market
Posted 19-Jun-2019 17:20


New report by Unisys shows New Zealanders want action by social platform companies and police to monitor social media sites
Posted 19-Jun-2019 17:09


ASB adds Google Pay option to contactless payments
Posted 19-Jun-2019 17:05


New Zealand PC Market declines on the back of high channel inventory, IDC reports
Posted 18-Jun-2019 17:35


Air New Zealand uses drones to inspect aircraft
Posted 17-Jun-2019 15:39


TCL Electronics launches its first-ever 8K TV
Posted 17-Jun-2019 15:18


E-scooter share scheme launches in Wellington
Posted 17-Jun-2019 12:34


Anyone can broadcast with Kordia Pop Up TV
Posted 13-Jun-2019 10:51


Volvo and Uber present production vehicle ready for self-driving
Posted 13-Jun-2019 10:47


100,000 customers connected to fibre broadband network through Enable
Posted 13-Jun-2019 10:35



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.