Geekzone: technology news, blogs, forums
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

339 posts

Ultimate Geek

# 109089 12-Sep-2012 13:20
Send private message

Pretty much all the posts I've done in the last year or two have been asking for help and advice. So I thought it'd be nice for a change to post some feedback on how that advice etc has panned out and maybe some of this will help someone else looking at similar issues.

So anyway, I had a Vodafone Broadband Complete modem/router (Huawei) and I have upgraded this to a Draytek Vigor 120 in bridge mode and a Netgear WNDR3700 dual band wireless router flashed with Gargoyle Router v1.5.6

The first issue I had before was with interference from our microwave oven when streaming music over WiFi to our kitchen stereo. See post:

Not only would the microwave stop the streaming, it would then require a restart of the stereo and reboot of the router to get the signal back. I was basically looking at having to wire ethernet under the floor from the router to the stereo. However, now using the WNDR3700, the microwave has basically no effect on wireless streaming to the stereo. i.e. not only do we not have to retstart/reboot after using the microwave, but we don't even lose the stream while actually using the microwave. So problem solved. By comparison to the WNDR3700, the Huawei is really just a toy in this regard.

The next big issue we had was with sharing our WiFi connection with tenants in a flat in the basement of our house. See post:

The problem was worrying about how much bandwidth we would be left with if our tenants were maxing out our connection and also possible concerns about what sites etc they would access. Thanks to advice from Ragnor, I gave Gargoyle a go and it has done the job superbly. This was my first foray into third party firmware, but it has all been fairly straightforward.

Specifically I gave fixed IP address to all our own devices (Apple TV, laptop, bluray player etc) in the range between - Then I set anything else (the tenants' devices) to acquire IPs from DHCP in the range - Then in the Gargoyle QoS I set up a "Main" class with CIDR address and a "Flat" class with CIDR address Then finally I allocated the Main class 80% of bandwidth and the Flat class 20% for both upload and download. This will mean that if our connection is saturated, then we will be guaranteed 80% of it (around 9 Mbps), which should be fine for everything we need. Note, when the link is not saturated, then the Flat will get as much as they are requesting, even if it is more than 20%.

So problem solved again. Note, with Gargoyle we also get web site monitoring etc, so we can ensure our internet connection isn't being used for something undesirable - although we know our tenants well enough to think that is fairly unlikely. Also, at some point I'll probably get competing requirements for bandwidth within our own family (kids with gaming etc). At that point Gargoyle has the flexibility to easily tailor the QoS to our needs.

Couple of things I learnt along the way:

1. If you want to set your router to 192.168.1.x, then change the Draytek to something else (e.g. BEFORE connecting the router to it.

2. If you reset the Draytek to factory settings, then you're not resetting it to NZ settings. i.e. they are preset with NZ settings before sending out (thanks theEd) (

So in my view, a very good set up for busy home requirements - especially where you have QoS type needs.

Any down sides? Well I guess a couple:

1. The cost. If you're on a budget, then $90 for the Draytek plus $165 for the Netgear may be too much. However, you can achieve a similar set up with a cheaper router like the TP Link TL-WR1043ND. In our case I decided that the dual band was worth having and our tenants are paying us for their share of the WiFi, so it's sort of self-funding.

2. As at the latest version of Gargoyle (1.5.6), the dual band support is fairly poor. e.g. you can't have different passwords for each band, or choose to publish only one of the SSIDs etc. In our case, none of these were show-stoppers and I'm guessing that dual band support will improve in subsequent versions.

So anyway, thanks for the help from Ragnor, theEd, sidefx and others and I hope some of this helps someone else along the way.

Create new topic
3340 posts

Uber Geek


  # 684931 12-Sep-2012 13:25
Send private message

Great post! An excellent reference for the future and Always good to hear when things work out :)

339 posts

Ultimate Geek

  # 684945 12-Sep-2012 13:40
Send private message

Small correction.,  The Netgear WNDR3700 was $190, not $165.  So all up cost, including the Draytek Vigor 120, was $280.


3340 posts

Uber Geek


  # 684949 12-Sep-2012 13:53
Send private message

Sounds like a nice setup, and the Vigor120s get a lot of praise around here so definitely good devices; the netgear looks very nice too. As you mention in OP though anyone on a tighter budget can get a similar setup for $80-100 with a secondhand RTA1320 + TL-WR1043ND flashed to Gargoyle - very good bang for buck IMO. I just wish I could use mine with a Fritzbox without double-NAT! :)

Create new topic

Twitter and LinkedIn »

Follow us to receive Twitter updates when new discussions are posted in our forums:

Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:

Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:

News »

Microsoft launches first Experience Center worldwide for Asia Pacific in Singapore
Posted 13-Nov-2019 13:08

Disney+ comes to LG Smart TVs
Posted 13-Nov-2019 12:55

Spark launches new wireless broadband "Unplan Metro"
Posted 11-Nov-2019 08:19

Malwarebytes overhauls flagship product with new UI, faster engine and lighter footprint
Posted 6-Nov-2019 11:48

CarbonClick launches into Digital Marketplaces
Posted 6-Nov-2019 11:42

Kordia offers Microsoft Azure Peering Service
Posted 6-Nov-2019 11:41

Spark 5G live on Auckland Harbour for Emirates Team New Zealand
Posted 4-Nov-2019 17:30

BNZ and Vodafone partner to boost NZ Tech for SME
Posted 31-Oct-2019 17:14

Nokia 7.2 available in New Zealand
Posted 31-Oct-2019 16:24

2talk launches Microsoft Teams Direct Routing product
Posted 29-Oct-2019 10:35

New Breast Cancer Foundation app puts power in Kiwi women's hands
Posted 25-Oct-2019 16:13

OPPO Reno2 Series lands, alongside hybrid noise-cancelling Wireless Headphones
Posted 24-Oct-2019 15:32

Waikato Data Scientists awarded $13 million from the Government
Posted 24-Oct-2019 15:27

D-Link launches Wave 2 Unified Access Points
Posted 24-Oct-2019 15:07

LG Electronics begins distributing the G8X THINQ
Posted 24-Oct-2019 10:58

Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.