Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




895 posts

Ultimate Geek


# 110661 13-Oct-2012 15:44
Send private message

Hi

I have a few Zenbu Routers that we don't use anymore and want to flash the standard linksys firmware on them WRT54GL.

Anyone know how it can be done?

Dion

Create new topic
28571 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  # 700680 13-Oct-2012 15:48
Send private message

TFTP for a start. If that doesn't work you'll need to use a JTAG cable to clear it and start again.
 

3426 posts

Uber Geek

Trusted

  # 700812 14-Oct-2012 00:16
Send private message

Pretty sure you could just use the bricked firmware recovery method and flash DD-WRT onto it using TFTP




Ray Taylor
Taylor Broadband (rural hawkes bay)
www.ruralkiwi.com

There is no place like localhost
For my general guide to extending your wireless network Click Here




 
 
 
 




895 posts

Ultimate Geek


  # 700876 14-Oct-2012 10:13
Send private message

cheers will dig up some instructions and try it out.

Dion

3216 posts

Uber Geek

Subscriber

  # 700897 14-Oct-2012 10:55
Send private message

Yea if it's like the one I just did last week, download the latest firmware from linksys and a tftp program.
I used a small one called tftp2.exe, can't remember where I got it from sorry.
Set your computer to a static ip of 192.168.1.10 and connect a patch cable from that to port 1 on the linksys.
Disconnect all other cables from the linksys.
Run the tftp software and set the ip to 192.168.1.1 and select the firmware file but don't start the upload yet.
Open a command prompt on your computer and ping 192.168.1.1 -t.
Now connect the power to the linksys and watch the pings. As soon as you get a reply start the tftp upload.
Hopefully it will do its thing.
If you never get a ping response try holding the reset button on the linksys for about 10 seconds then wait and see if it responds.



895 posts

Ultimate Geek


  # 700899 14-Oct-2012 11:01
Send private message

CYaBro: Yea if it's like the one I just did last week, download the latest firmware from linksys and a tftp program.
I used a small one called tftp2.exe, can't remember where I got it from sorry.
Set your computer to a static ip of 192.168.1.10 and connect a patch cable from that to port 1 on the linksys.
Disconnect all other cables from the linksys.
Run the tftp software and set the ip to 192.168.1.1 and select the firmware file but don't start the upload yet.
Open a command prompt on your computer and ping 192.168.1.1 -t.
Now connect the power to the linksys and watch the pings. As soon as you get a reply start the tftp upload.
Hopefully it will do its thing.
If you never get a ping response try holding the reset button on the linksys for about 10 seconds then wait and see if it responds.


Cheers will try it out tonight, was hoping to do it at work today as it is for work but I left it at home.

Regards



Dion



895 posts

Ultimate Geek


  # 701088 14-Oct-2012 19:06
Send private message

CYaBro: Yea if it's like the one I just did last week, download the latest firmware from linksys and a tftp program.
I used a small one called tftp2.exe, can't remember where I got it from sorry.
Set your computer to a static ip of 192.168.1.10 and connect a patch cable from that to port 1 on the linksys.
Disconnect all other cables from the linksys.
Run the tftp software and set the ip to 192.168.1.1 and select the firmware file but don't start the upload yet.
Open a command prompt on your computer and ping 192.168.1.1 -t.
Now connect the power to the linksys and watch the pings. As soon as you get a reply start the tftp upload.
Hopefully it will do its thing.
If you never get a ping response try holding the reset button on the linksys for about 10 seconds then wait and see if it responds.


I tried doing that and get the pings but keep getting  a time out when I try and push the image to it, any other suggestions, I note there is a password field but I have left it blank.

Dion

28571 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  # 701089 14-Oct-2012 19:08
Send private message

Some custom firmware such as this doesn't allow an easy path back to the stock Linksys firmware. The only way to do this in many cases is to use a JTAG cable.

 
 
 
 




895 posts

Ultimate Geek


  # 701092 14-Oct-2012 19:17
Send private message

sbiddle: Some custom firmware such as this doesn't allow an easy path back to the stock Linksys firmware. The only way to do this in many cases is to use a JTAG cable.


Is there anywhere local to get them other than ebay?

Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Vodafone integrates eSIM into device and wearable roadmap
Posted 17-Jan-2020 09:45


Do you need this camera app? Group investigates privacy implications
Posted 16-Jan-2020 03:30


JBL launches headphones range designed for gaming
Posted 13-Jan-2020 09:59


Withings introduces ScanWatch wearable combining ECG and sleep apnea detection
Posted 9-Jan-2020 18:34


NZ Police releases public app
Posted 8-Jan-2020 11:43


Suunto 7 combine sports and smart features on new smartwatch generation
Posted 7-Jan-2020 16:06


Intel brings innovation with technology spanning the cloud, network, edge and PC
Posted 7-Jan-2020 15:54


AMD announces high performance desktop and ultrathin laptop processors
Posted 7-Jan-2020 15:42


AMD unveils four new desktop and mobile GPUs including AMD Radeon RX 5600
Posted 7-Jan-2020 15:32


Consolidation in video streaming market with Spark selling Lightbox to Sky
Posted 19-Dec-2019 09:09


Intel introduces cryogenic control chip to enable quantum computers
Posted 10-Dec-2019 21:32


Vodafone 5G service live in four cities
Posted 10-Dec-2019 08:30


Samsung Galaxy Fold now available in New Zealand
Posted 6-Dec-2019 00:01


NZ company oDocs awarded US$ 100,000 Dubai World Expo grant
Posted 5-Dec-2019 16:00


New Zealand Rugby Selects AWS-Powered Analytics for Deeper Game Insights
Posted 5-Dec-2019 11:33



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.