Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


noc



107 posts

Master Geek


#112568 12-Dec-2012 23:07
Send private message

Hi Everybody!

First post on Geekzone, and hoping to help some folks out that may be having Firmware problems with Linksys modems, Specifically X-series models (X2000 and X3000).

I got my internet connected yesterday and while I was in the process of setting everything up, I thought it would be a good idea to upgrade the Firmware on my Cisco Linksys X2000 router, as the current version was quite dated. I jumped on the Cisco site and tracked down the latest version, which is version 2.0.04 (Annex A). The initial setup and Firmware installation went smooth, however, after surfing the net a bit, it soon became apparent that there were a few Login issues on a couple of site (eg. Facebook) and connection speeds felt very sluggish.

Anyway, after a good few hours of fine tuning and research, I found that a few people are having problems with the new Firmware that Linksys released, some more than others. The work around that was suggested, was to "allow" cookies in the router. As one person explained; "Under Security/Firewall in the X2000, I had to _CHECK_ the cookies field for my PC to work with sites like google, amazon, linkedin, and others" . The buggy Firmware however was still, well, bugging me, so I kept on searching for a better solution.

Long story short, I email a very helpful guy somewhere in America who had the previous version of Firmware, which he was kind enough to send to me (still a newer version than what was on the router - version 2.0.03), and the router is LOADS better now. (you can PM me for the previous version).

Not to badmouth the company, but reading up about this whole thing; it definitively sounds like Linksys dropped the ball on this one, releasing Firmware that caused issues easily detected through basic testing, or so it seems. Hopefully they are working on a new Firmware version at the moment which will fix all this.


So for anyone who are having troubles with the Linksys X-series router Firmware, here are two Solutions:

1: Open a browser and go to the router address (192.168.1.1) and check the Cookie setting in the router. (Under the Security tab)

2: Downgrade the Firmware to version 2.0.03. Now, this is a bit more tricky as I couldn't find a previous version anywhere and Linksys apparently don't support the older Firmware, hence the reason why it's not available on the website. So if you would like the previous version, please PM me and I can email the attachment to you.

As I said, Linksys are probably working on a new version, so if you haven't upgraded your Firmware, best to wait for a little while longer :)

Hope this helps!

Create new topic
5 posts

Wannabe Geek


  #732153 13-Dec-2012 16:50
Send private message

Hi
Since you are talking about X3000 as well ... I got a new one for a client of mine.  They use Xtra Webmail and wanted some more capability.  Cut a long story short - with their old Thompson router from Telecom they had no troubles accessing Xtra in both IE8 and Firefox 16.  It appears they did not have any problems with the router as delivered.  I go and update the X3000 because of some other issues to do with DDNS to the latest firmware, and update Firefox to 17.0.1 - all hell lets loose - they can't log on to their accounts, just get the white screen of death in the browsers.
What's happening is the browser is attempting to do a pair of GETs (one reports a 200 OK, the other then reports a redirection 302), repeated ad nausum and nothing comes back from Yahoo or anybody else.  Don't know why this is happening, but I think I might try a downgrade of the router if I feel brave.
I did discover a bug in Firefox, but I don't think this is the cause as it works ok when using another router.  [Plenty of errors in the Yahoo and Firefox code though.  Just turn on the debugger and logger to see.]

So, is anybody out there seeing problems with Yahoo Xtra and Linksys X3000 combined?

5 posts

Wannabe Geek


  #732408 14-Dec-2012 09:50
Send private message

Got my Cisco Linksys X3000 problem with logging into Xtra fixed. 

The Cause.  The firmware upgrade to 1.0.04.007 (using FW_X3000_AnnexA_1.0.04.007_20121009.bin from the support site) was a good idea 'cos it gives IPv6 support when the crunch comes.  However, the cisco support lady said to reset to factory defaults because I was trying to fix an issue with DDNS (router was not displaying the status) - impact was router went into a mode of filtering out cookies.  This was why IE8 and Firefox both had problems with Yahoo Xtra, and why the problem moved about (i.e. from one page to another, I guess it depended on the cookie status).

The fix was to go to the Security page of the router and in the Filter section, tick the Cookies box and then Save Settings.  Counter-intuitive but did the job - thanks to this blog for the X2000 for this solution.

 
 
 
 


noc



107 posts

Master Geek


  #732455 14-Dec-2012 10:55
Send private message

Glad to hear you got it sorted, ShermanJ.

I'm going to keep an eye on the Cisco site for any new Firmware versions from Linksys for the X2000/3000. When they release a new version I'll do some testing with the new Firmware and report back here.

Cheers!

57 posts

Master Geek


  #740592 6-Jan-2013 10:18
Send private message

SharmanJ: The firmware upgrade to 1.0.04.007 (using FW_X3000_AnnexA_1.0.04.007_20121009.bin from the support site)


Interesting: the current version on Cisco's site is lower than yours: Ver.1.0.03 (Build 1). Did they pull it or did you get it from another Cisco site?

5 posts

Wannabe Geek


  #740770 6-Jan-2013 21:35
Send private message

I have tried to find the firmware release I had used (FW_X3000_AnnexA_1.0.04.007_20121009.bin) but it has vanished!
Cisco USA discussion thread gives no clues:
http://homecommunity.cisco.com/t5/Cable-and-DSL/X3000-All-cookies-blocked/td-p/576720

Note: NZ support downloads has an old version, see http://homesupport.cisco.com/en-apac/support/gateways/X3000.  You do need Annex A by the way.

I don't think I can help anymore.

5 posts

Wannabe Geek


  #740772 6-Jan-2013 21:40
Send private message

Thinking about it, it's 11MBytes so I can't send by email and I don't want/have dropbox otherwise I would use that to transfer the file to you (at your own risk).

noc



107 posts

Master Geek


  #743367 11-Jan-2013 15:39
Send private message

Hmm, very interesting. Yes it does look as though ver 2.0.04 (for the X2000) has been removed from that site as well, and version 2.0.03 is now available for download. Glad they took 2.0.0.4 down!

Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Sony introduces the digital camera ZV-1 for content creators
Posted 27-May-2020 12:47


Samsung Announces 2020 QLED TV Range
Posted 20-May-2020 16:29


D-Link A/NZ launches AI-Powered body temperature measuring system
Posted 20-May-2020 16:22


NortonLifeLock Online Banking Protection now available for New Zealand banks
Posted 20-May-2020 16:14


SD Express delivers new gigabyte speeds for SD memory cards
Posted 20-May-2020 15:00


D-Link A/NZ launches Nuclias cloud managed network solution hosted in Australia
Posted 11-May-2020 17:53


Logitech introduces new video streaming solution for home studios
Posted 11-May-2020 17:48


Next generation Volvo cars to be powered by Luminar LiDAR technology
Posted 7-May-2020 13:56


D-Link A/NZ launches Wi-Fi Certified EasyMesh system
Posted 7-May-2020 13:51


Spark teams up with Microsoft to bring Xbox All Access to New Zealand
Posted 7-May-2020 13:01


Microsoft plans to establish its first datacenter region in New Zealand
Posted 6-May-2020 11:35


Genesis School-gen has joined forces with Mind Lab Kids
Posted 1-May-2020 12:53


Malwarebytes expands into privacy with fast, frictionless VPN
Posted 30-Apr-2020 16:06


Kordia to donate TV airtime on Channel 200 to community groups
Posted 30-Apr-2020 16:00


OPPO A91 is a high specs mid-range smartphone
Posted 23-Apr-2020 16:44



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.