Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




31 posts

Geek


Topic # 113853 30-Jan-2013 09:34
Send private message

Hi, I accidentally reset my level one access point and now the wifi connection is not secure and the name (SSID?) has defaulted to 'Level One" was previously "The-Bunker".  I've tried setting my mac with only on ethernet internet connection and then type http://192.168.0.1 (the default IP of the access point) to reconfigure my access point but safari can't open the page..  I want to ideally re-establish the "The-Bunker" wifi network but at a minimum I want a new secure wifi network.  Any suggestions? p.s. I'm an amateur on these matters but generally can get things resolved but using google but unsuccessful this time. 

Filter this topic showing only the reply marked as answer Create new topic
Banana?
4113 posts

Uber Geek
+1 received by user: 898

Subscriber

  Reply # 753087 30-Jan-2013 09:44
Send private message

What is the IP address of your mac now?
How are you getting the internet on it? - Are you plugged into your router directly?



31 posts

Geek


  Reply # 753092 30-Jan-2013 09:53
Send private message


I think the IP address of my Mac is 10.1.13 (got via Network - Ethernet connection) Is the right?

My current connection is Dlink Router - Ethernet cable - Airport Extreme - Ethernet cable - Mac.

p.s. I have an Level one access point connected via ethernet to Airport Extreme too.

 
 
 
 


2768 posts

Uber Geek
+1 received by user: 573


  Reply # 753098 30-Jan-2013 10:00
Send private message

Try 192.168.1.1



BDFL - Memuneh
59387 posts

Uber Geek
+1 received by user: 10599

Administrator
Trusted
Geekzone
Lifetime subscriber

  Reply # 753101 30-Jan-2013 10:01
Send private message

johnstbr:
I think the IP address of my Mac is 10.1.13 (got via Network - Ethernet connection) Is the right?


Look at your IP configuration and find the Gateway. That's your router IP address.

If you reset the router it's probably not in the 192.168.x.x subnet anymore.






Banana?
4113 posts

Uber Geek
+1 received by user: 898

Subscriber

  Reply # 753109 30-Jan-2013 10:24
Send private message

I don't understand why you have the Level1 as well as the Airport? Are they in different parts of your house?

If you have reset the Level1, and it's default IP is 192.168.0.1, you will need to change your Mac to an IP address of 192.168.0.2 (or anything but 0.1) and plug the Level1 directly into the Mac to get access to it. While you have access to it, change it's IP address to something in the same range as your Airport (10.1.1.254 for example) so that you do not have to repeat that excercise.



31 posts

Geek


  Reply # 753111 30-Jan-2013 10:29
Send private message

Sorry my IP ethernet is 10.1.1.3 (I get "It works" when i enter into safari) my router is 10.1.1.1. when I enter this into safari then get a log-in box for my D-link router (not my Level One access point).  It asks for a name and password which I don't know what they are.


303 posts

Ultimate Geek
+1 received by user: 8


  Reply # 753125 30-Jan-2013 10:42
Send private message

For the username try admin and leave the password blank.




iMac 27 2014
Macbook Pro Retina 2013
iPhone 6s
iPad Air 2

VDSL Sync @ 69Mbps Down / 29Mbps Up


13445 posts

Uber Geek
+1 received by user: 2273

Trusted
Subscriber

  Reply # 753127 30-Jan-2013 10:44
Send private message

If you go to a command prompt then type

tracert 4.4.4.4 OR
traceroute 4.4.4.4

The IP address if your WAP should be the second entry on the traceroute - I think. Copy that number into your browser.




AWS Certified Solution Architect Professional, Sysop Administrator Associate, and Developer Associate
TOGAF certified enterprise architect
Professional photographer


Banana?
4113 posts

Uber Geek
+1 received by user: 898

Subscriber

  Reply # 753150 30-Jan-2013 11:06
Send private message

timmmay: If you go to a command prompt then type

tracert 4.4.4.4 OR
traceroute 4.4.4.4

The IP address if your WAP should be the second entry on the traceroute - I think. Copy that number into your browser.


If he is connected to the WAP it will be.

The OP also has an Airport Extreme, which is a WAP as well.

3218 posts

Uber Geek
+1 received by user: 1021

Subscriber

  Reply # 753152 30-Jan-2013 11:10
Send private message

You need to plug your Mac directly in to the level one AP. You need to set the IP address of your Mac to something like 192.168.0.66 and then set a default gateway of 192.168.0.1, oh and a netmask of 255.255.255.0. This is providing your level one AP defaults back to 192.168.0.1.

14 posts

Geek


Reply # 753154 30-Jan-2013 11:14
Send private message

If you stuck with an issue, then reset it and make default factory setting using very small switch beside or somewhere near from the power plug. Use PEN or PIN for push that small button to default factory setting and reconfigure it. Hope it helps.

Regards



31 posts

Geek


  Reply # 753176 30-Jan-2013 11:39
Send private message

Ok with Level one AP ethernet plugged into Mac. I get IP address of 169.254.193.179.  Inputing this into safari and I get "it works". If I connect via wifi IP address is 192.168.2.2 and again I get it works.  Still at a lost how to set up security. 

chevrolux, How do I set a default gateway?

I can't acces my D-link router using admin too (not sure I need to as it's the level one access point) that is troubling me.

2080 posts

Uber Geek
+1 received by user: 621

Subscriber

  Reply # 753190 30-Jan-2013 11:51
Send private message

169 means there is no DHCP in the mix. You won't need a gateway to configure the AP. Just set a static IP on your Mac in the same range as the AP and plug into it directly.

2768 posts

Uber Geek
+1 received by user: 573


  Reply # 753193 30-Jan-2013 11:54
Send private message

Why do I get the feeling that resetting the Level one may have also turned on its DHCP server, It sounds awfully like there are two devices tossing out leases, the level one in the 192.168 range and the AP extreme in the 10.0 range

3218 posts

Uber Geek
+1 received by user: 1021

Subscriber

  Reply # 753459 30-Jan-2013 20:17
Send private message

johnstbr: Ok with Level one AP ethernet plugged into Mac. I get IP address of 169.254.193.179.  Inputing this into safari and I get "it works". If I connect via wifi IP address is 192.168.2.2 and again I get it works.  Still at a lost how to set up security. 

chevrolux, How do I set a default gateway?

I can't acces my D-link router using admin too (not sure I need to as it's the level one access point) that is troubling me.


I wouldn't have a clue on a mac... wait a sec...

Here we go!

Now don't bother connecting to it via wifi. It obviously has a dhcp server running and might screw things up for us.

Just plug it in and set up your adapter as mentioned previously.

Filter this topic showing only the reply marked as answer Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52


NOW to deploy SD-WAN to regional councils
Posted 19-Dec-2017 19:46


Mobile market competition issues ComCom should watch
Posted 18-Dec-2017 10:52


New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39


UAV Traffic Management Trial launching today in New Zealand
Posted 12-Dec-2017 16:06


UFB connections pass 460,000
Posted 11-Dec-2017 11:26


The Warehouse Group to adopt IBM Cloud to support digital transformation
Posted 11-Dec-2017 11:22


Dimension Data peeks into digital business 2018
Posted 11-Dec-2017 10:55



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.