Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


1609 posts

Uber Geek
+1 received by user: 267

Subscriber

Topic # 115639 2-Apr-2013 13:52
Send private message

Thought I would start a topic to get peoples suggestions/preferences for their setups.  I currently use a WRP400 with a cable 20/2 Mbps and when using multi downloading I can jam this router up with throughput inside 5-10 minutes.  Other times it runs at high speed for hours, but ultimately needs a reset to get the speeds to return to normal.  My understanding is that it is a problem with the memory and throughput, which is why resetting it fixes the problem.

 I have just upgraded to the 100Mbps and want a setup in which the LAN can handle the throughput capable of my internet without failing / requiring a reset every day.  I have been looking at my options and the easiest would appear to be a Cisco SRP521 one stop shop (I have vfx).  However before I make a purchase like that ($250+) I want to know if there is an equally comparable setup utilising my current WRP400 for wifi and VFX.  Are there any routers (WIFI free potentially) that could sit between the modem and the WRP400 that take over DHCP and deal with LAN connections which for me are essential to have high speed throughput??

TCL Modem  - > *NEW* device - >  WRP400

Create new topic
1332 posts

Uber Geek
+1 received by user: 152
Inactive user


  Reply # 790703 2-Apr-2013 14:11
Send private message

You jam up a WRP400 with 20Mbit/s of traffic? I think the hardware must be faulty if that is the case.

Try lowering your thread count if it continues to happen. Something like 3 threads should be plenty to saturate 20Mbit/s.

3343 posts

Uber Geek
+1 received by user: 1089

Trusted
Vocus

  Reply # 790707 2-Apr-2013 14:17
Send private message

It may be the number of open connections, assuming something along the lines of bittorrent being used.  Dial back the max peers to, say, 100, and see what happens.  Then increase by 100 until you find the "limit" where things get unstable, dial back by 50, and see where that leaves you.

BDFL - Memuneh
61185 posts

Uber Geek
+1 received by user: 11967

Administrator
Trusted
Geekzone
Lifetime subscriber

  Reply # 790710 2-Apr-2013 14:19
One person supports this post
Send private message

I have a SRP521w on TelstraClear 100Mbps service, with VFX on line 1 and mynetfone on line 2. Connected to the router we have two 1Gbps hubs where we actually plug all the devices in our LAN (one iMac, one laptop, three smartphones, 1 Dell Zino HTPC, HDHomerun, Tivo, CurrentCost device plus a variety of tablets and other devices around here.

I don't have to reset the SRP521w. Sometimes it goes months in uptime, broken only when we go away on an extended holiday.

Before TelstraClear introduced its 100Mbps service I was in the trial and posted about getting up to 85Mbps in legal torrents downloads with multiple connections (a lot of connections actually). Never had a problem.




399 posts

Ultimate Geek
+1 received by user: 62


  Reply # 790740 2-Apr-2013 14:56
Send private message

Something like the RB450G has a lot of routing power or even the RB750GL could be sufficient
There are routing performance tables on the routerboard website:

http://routerboard.com/RB750GL
http://routerboard.com/RB450G







1609 posts

Uber Geek
+1 received by user: 267

Subscriber

  Reply # 790773 2-Apr-2013 15:35
Send private message

Normally it is using a downloader, with say 6 -12 connections, it then slows to 1200 - 1800 to say 300kbs and will not increase without a reset, getting tired of the resets.

Looks like the all in one SRP521w is the best option.. Thanks guys


210 posts

Master Geek
+1 received by user: 9

Trusted

  Reply # 791808 2-Apr-2013 17:09
Send private message

Maybe this would be of interest to you?  [on GeekZone FS]




Michelsen Computer Services Whangarei
-----------------------------------------------------------
I was born in a cross-fire hurricane
And I howled at my ma in the driving rain,
But it's all right now, in fact, it's a gas...
-----------------------------------------------------------

3559 posts

Uber Geek
+1 received by user: 1304

Subscriber

  Reply # 791813 2-Apr-2013 17:19
One person supports this post
Send private message

I vote for the Cisco SRP52x series. Really good router for high speed stuff.

Or for a bit more cash the draytek 2130 is a good device too. OpenWRT based if you like customising

78 posts

Master Geek
+1 received by user: 29


  Reply # 791904 2-Apr-2013 19:42
Send private message

HowickDota: Something like the RB450G has a lot of routing power or even the RB750GL could be sufficient


I second this. I use the RB450G with TC/VF 100/10 Mbps service. Works flawlessly, no trouble doing full 100 Mbps. Also has several permanent IPSec VPNs and gets excellent performance over those.



1609 posts

Uber Geek
+1 received by user: 267

Subscriber

  Reply # 791955 2-Apr-2013 21:34
Send private message

hmm options! will be researching all of them, cheers

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.