Geekzone: technology news, blogs, forums
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

159 posts

Master Geek

# 138096 19-Dec-2013 16:55
Send private message


I'd like to add a router to connect some wired devices on the other side of the house from my internet connection point, without running a network cable.

If I were to purchase two TP-Link TL-WR1042ND routers and bridge one using WDS, would this do the trick?

Also, I read somewhere that then using WDS, the DHCP should be disabled on the brigded router. With this config would the gigabit switch on the bridged router will peform direct gigabit networking between all wired devices connected to it, or will all networking be sent back to the primary router over the wifi and slow things down?

Note: I don't need to extend my wifi, just get wired devices working.

Are their any better ways to do this?


Create new topic

159 posts

Master Geek

  # 955035 19-Dec-2013 19:17
Send private message

I was doing some futher searhing and it appears that WDS is limited to WEP and 54Mbs on some routers, can't find any specifics for the TP Link. Also would flashing with DD-WRT help?

3974 posts

Uber Geek
+1 received by user: 1676


  # 955055 19-Dec-2013 19:51
Send private message

WDS is rubbish.

If you really really don't want to run a cable use Ubiquiti AirWire.

It makes a point-to-point link and is plug and play. Gives fairly good performance provided there is good coverage.


22050 posts

Uber Geek
+1 received by user: 4679


  # 955060 19-Dec-2013 19:55
One person supports this post
Send private message

Wds is fine if you are only using wired ports at the other end. The tenda and tp link ones I have tried all gave an aes option when setting up the bridge.

Wds all turns to crap when you try to use the remote end as an accesspoint as well or the rf path is variable and poor so mcs15 doesn't work reliably so it keeps flapping around the other modes.


159 posts

Master Geek

  # 956356 22-Dec-2013 23:31
Send private message

Thanks for the advice.

I wasn't planning to repeat the wifi signal, just to be able to connect some wired devices on the remote router and beam them back to the first router. Sounds like there are mixed results with WDS with different routers. I don't want to risk poor results.

Today, I was thinking about how I could run a cable up one insulated exterier wall and down another tidily. I was in luck. I managed to pull a cable up through an old aerial socket and then down a phone jack on the other side of the house. Didn't think it would be so easy. Just to need to get a two way phone/RJ45 wall plate to finish the job.

I found this one, and the price is reasonable:

I ran cat6 cable. This socket is 5e. Shouldn't make much of a difference for 1Gbps?

3329 posts

Uber Geek
+1 received by user: 696


  # 956530 23-Dec-2013 12:09
Send private message

WDS Repeating = Bad
WDS Bridging = good <<<What you were trying to do
WDS Bridging with the client end radio plugged into another AP to make a dual radio repeater = good but wont work with same SSID

Check out my signature for the guide on extending your wireless network. Good job on running the cable - its always my preferred way to do it.

Ray Taylor
Taylor Broadband (rural hawkes bay)

There is no place like localhost
For my general guide to extending your wireless network Click Here

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:

Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:

Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:

News »

Porirua City Council first to adopt new council software solution Datascape
Posted 15-May-2019 12:00

New survey provides insight into schools' technology challenges and plans
Posted 15-May-2019 09:30

Apple Music now available on Alexa devices in Australia and New Zealand
Posted 15-May-2019 09:11

Make a stand against cyberbullying this Pink Shirt Day
Posted 14-May-2019 20:23

Samsung first TV manufacturer to launch the Apple TV App and Airplay 2
Posted 14-May-2019 20:11

Vodafone New Zealand sold
Posted 14-May-2019 07:25

Kordia boosts cloud performance with locally-hosted Microsoft Azure ExpressRoute
Posted 8-May-2019 10:25

Microsoft Azure ExpressRoute in New Zealand opens up faster, more secure internet for Kiwi businesses
Posted 8-May-2019 09:39

Vocus Communications to deliver Microsoft Azure Cloud Solutions through Azure ExpressRoute
Posted 8-May-2019 09:25

Independent NZ feature film #statusPending to premiere during WLG-X
Posted 6-May-2019 22:13

The ultimate dog photoshoot with Nokia 9 PureView #ForgottenDogsofInstagram
Posted 6-May-2019 09:41

Nokia 9 PureView available in New Zealand
Posted 6-May-2019 09:06

Motorola Solutions joins local partners to deliver advanced communications network in New Zealand
Posted 30-Apr-2019 21:50

Micron launches high-performance NVMe SSDs for cloud and enterprise markets
Posted 30-Apr-2019 10:27

Jaguar Land Rover trials in-vehicle smart wallet technology
Posted 29-Apr-2019 21:48

Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.