I would like some help with a 502t gen2 problem.
I recently flashed openwrt onto a 502t gen2 modem with the mtd settings of a 502t non gen2. It appears that this has wiped mtd3 which is the configuration file and bricked the router. I have made a jtag cable and can successfully reflash the processor but require the correct mtd settings (I should have backed this info up but was too lazy).
If anyone is interested in helping the procedure for obtaining this data is:
Log in to modem with telnet i.e. telnet <i.p. address>
enter USER (default admin)
enter PASSWORD (default admin)
once in busybox run
Save output and post to forum.
Thanks in advance for anyone willing to help.