Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




4 posts

Wannabe Geek


Topic # 185274 16-Nov-2015 19:09
Send private message

Just a quick question-

This is how both ends of an approx 20m Cat6 cable were wired by the Fibre installers: 

1: Wht/Blue, 2: Blue, 3: Wht Brown, 4: Brown, 5: Green, 6: Wht green, 7: White Orange, 8: orange

I've had no problems with internet after 2 weeks, which is how long it took me to find this little oddity.  Any thoughts on if this is a good idea to leave as is? 

Create new topic
449 posts

Ultimate Geek
+1 received by user: 92

Subscriber

  Reply # 1429147 16-Nov-2015 19:21
2 people support this post
Send private message

It would work like that provided it is the same on both ends. 

However I would not leave it like that. The way the wire is twisted is to lower the noise on the cable. However this requires it to be correctly terminated to work correctly.

It would be best to contact @chorusnz on here or wait for them to respond on this thread as the installer needs to be told this is incorrect and should really fix it.




Geoff E

'That VDSL Cat'
6421 posts

Uber Geek
+1 received by user: 1225

Trusted
Spark
Subscriber

  Reply # 1429148 16-Nov-2015 19:21
Send private message

well that does seem a little weird.

it will still function as its direct replacements, be it subpar... but there is a reason for standards...




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


 
 
 
 




4 posts

Wannabe Geek


  Reply # 1429159 16-Nov-2015 19:39
Send private message

geocom: It would work like that provided it is the same on both ends. 

However I would not leave it like that. The way the wire is twisted is to lower the noise on the cable. However this requires it to be correctly terminated to work correctly.

It would be best to contact @chorusnz on here or wait for them to respond on this thread as the installer needs to be told this is incorrect and should really fix it.


Yeah, I still have the contact details for the installer, think I'll be calling them tomorrow. 

3070 posts

Uber Geek
+1 received by user: 502

Trusted

  Reply # 1429208 16-Nov-2015 20:29
Send private message

The second data pair (3 Wht Brown / 6 wht green) are not twisted together in the cable and so will be causing / receiving cross talk interference. They need to be the same color pair.




Ray Taylor
Taylor Broadband (rural hawkes bay)
www.ruralkiwi.com

There is no place like localhost
For my general guide to extending your wireless network Click Here




506 posts

Ultimate Geek
+1 received by user: 38

Trusted
Subscriber

  Reply # 1429213 16-Nov-2015 20:36
Send private message

LOL - was this actually Chorus?

449 posts

Ultimate Geek
+1 received by user: 92

Subscriber

  Reply # 1429216 16-Nov-2015 20:40
Send private message

dimsim: LOL - was this actually Chorus?

Was going to comeback about enable and LFC with another post afterwards but OP responded before I could fire it off.

I know the chorus guys on here are good. Not sure LFC or Enable are actually on the forums here.




Geoff E

802 posts

Ultimate Geek
+1 received by user: 204

Subscriber

  Reply # 1429220 16-Nov-2015 20:43
One person supports this post
Send private message

dimsim: LOL - was this actually Chorus?


Thats what I was going to ask - as the chorus fibre techs dont wire up plugs but terminate any additional Data cableing on to RJ45 sockets to 568A as marked out on the back of the Jacks

506 posts

Ultimate Geek
+1 received by user: 38

Trusted
Subscriber

  Reply # 1429228 16-Nov-2015 21:00
One person supports this post
Send private message

InstallerUFB:
dimsim: LOL - was this actually Chorus?


Thats what I was going to ask - as the chorus fibre techs dont wire up plugs but terminate any additional Data cableing on to RJ45 sockets to 568A as marked out on the back of the Jacks


precisely - it would be a major fubar for a comms tech to ignore both 568a and 568b

1290 posts

Uber Geek
+1 received by user: 319


  Reply # 1429233 16-Nov-2015 21:07
Send private message

Yeeesh!  I guess with the rush to get UFB out faster they are employing people who have embelished their CVs and skills a little!

Wonder how much money is spent on return visits to customers to fix stuff ?






DRZ  Smarterer


3113 posts

Uber Geek
+1 received by user: 935

Subscriber

  Reply # 1429240 16-Nov-2015 21:15
2 people support this post
Send private message

InstallerUFB:
dimsim: LOL - was this actually Chorus?


Thats what I was going to ask - as the chorus fibre techs dont wire up plugs but terminate any additional Data cableing on to RJ45 sockets to 568A as marked out on the back of the Jacks


Are you really that surprised though that this could be happening?

Their seems to be a large number of techs working on the networks (copper & fibre) that really just have no idea what to do. It seems on a weekly basis I am needing to explain to a technician how to get a vdsl circuit connected, or how to diagnose a dsl fault (and not even at a high level, as in, have you checked the filter is wired correctly, have you changed distribution pairs etc). It's getting really really bad.
I don't know if the old school, skilled guys have either left or been shifted to higher management positions but they are certainly not working on the network. I think the codes system has a hell of a lot to do with it but that's a discussion for another day.

Anyway, OP, the cable has been wired strange by someone who is either colour blind or just plain stupid. Frankly, in a home situation with only 100Mb to 1Gb speeds over a short distance it isn't going to make any appreciable getting it re-wired to 568 specs so isn't worth the hassle of getting someone from Chorus to come back (who won't know that they are doing anyway) and re-wire it.

Edit: Oh and just for the record to balance out the Chorus comments....
Enable - Really good installs, seem to have the consents process nailed and they make churning existing connections really simple too as they liven up port 2 on the ONT with the new provider so there is no worries about down time.
UFF - Installs have been fine. Bit slower with consents. Churning has been an absolute nightmare with them, churns happen before the RFS and nothing is ready so often ends with a few hours of down time.



4 posts

Wannabe Geek


  Reply # 1429242 16-Nov-2015 21:17
Send private message

Not Chorus, was a subcontractor. Guy had been on job 2 months, previous experience in other construction field.  Nice guy, in a bit over his head tho. 

802 posts

Ultimate Geek
+1 received by user: 204

Subscriber

  Reply # 1429259 16-Nov-2015 21:49
Send private message

Vervuel: Not Chorus, was a subcontractor. Guy had been on job 2 months, previous experience in other construction field.  Nice guy, in a bit over his head tho. 


Chorus dont have staff out in the feild (except to do QA) - The installers (like me ) are either employees or subcontractors one of the service copmpays that sub-contract to do the install work from one of LFCs (Local Fibre Company) of which Chorus one. to the OP - Which citey/town are you in ?



4 posts

Wannabe Geek


  Reply # 1429529 17-Nov-2015 11:58
Send private message

I'm in New Plymouth, fwiw

329 posts

Ultimate Geek
+1 received by user: 25

Trusted

  Reply # 1429602 17-Nov-2015 12:49
Send private message

Vervuel: I'm in New Plymouth, fwiw


So nothing to do with Chorus.

You will need to be speaking with UFF instead, if that's the way you wish to go.

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

FUJIFILM introduces X-E3 mirrorless camera with wireless connectivity
Posted 18-Sep-2017 13:53


Vodafone announces new plans with bigger data bundles
Posted 15-Sep-2017 10:51


Skinny launches phone with support for te reo Maori
Posted 14-Sep-2017 08:39


If Vodafone dropping mail worries you, you’re doing online wrong
Posted 11-Sep-2017 13:54


Vodafone New Zealand deploy live 400 gigabit system
Posted 11-Sep-2017 11:07


OPPO camera phones now available at PB Tech
Posted 11-Sep-2017 09:56


Norton Wi-Fi Privacy — Easy, flawed VPN
Posted 11-Sep-2017 09:48


Lenovo reveals new ThinkPad A Series
Posted 8-Sep-2017 14:37


Huawei passes Apple for the first time to capture the second spot globally
Posted 8-Sep-2017 10:45


Vodafone initiative enhances te reo Maori pronunciation on Google Maps
Posted 8-Sep-2017 10:40


Voyager Internet expand local internet phone services company with Conversant acquisition
Posted 6-Sep-2017 18:27


NOW Expands in to Tauranga
Posted 5-Sep-2017 18:16


Windows 10 Fall Creators Update coming Oct. 17
Posted 4-Sep-2017 14:10


Garmin introduce Garmin vivoactive 3
Posted 1-Sep-2017 18:38


Kiwibank wastes $90 million on software – Reseller News
Posted 1-Sep-2017 13:45



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.