Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




1196 posts

Uber Geek
+1 received by user: 110


Topic # 185787 5-Dec-2015 17:38
Send private message

Hi folks,
I am wondering if anyone can recommend some alternatives to the Huawei HG659 that came with the cable install.  It is limited in its feature set and functionality for my needs (I think fine for general purpose usage) - I am also having an issue with the 5Ghz wifi randomly disconnected (although 2.4 seems fine).

I used to use an Apple Airport extreme which was very stable and allowed my to do all of my internal routing, static IPs, port forwarding as well as use 5Ghz wfi .  However, I can no longer use this as it does not have the VLAN feature required to connect to the cable modem.

Any new unit would need to have at least 4 x GB Ethernet ports, VLAN tagging, 5Ghz (or multiband support) and be pretty fast.  Also needs to support port forwarding (by IP), static IPs (DHCP) and good routing capabilities (not just by protocol).  My signal range requirements is about 15-20 meters.

Much thanks.





Software Engineer

 


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
25459 posts

Uber Geek
+1 received by user: 5269

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 1441165 5-Dec-2015 22:26
Send private message

VF cable does not require VLAN tagging.

919 posts

Ultimate Geek
+1 received by user: 177


  Reply # 1441205 5-Dec-2015 23:54
Send private message

You might want to double check your original post, either you got the modem or access type (xDSL/cable/fibre) wrong.

If it is indeed cable you cannot replace the all-in-one Technicolor modem/router unit, however you may plug in an additional access point or router behind it.


 
 
 
 




1196 posts

Uber Geek
+1 received by user: 110


  Reply # 1441252 6-Dec-2015 09:20
Send private message

sbiddle: VF cable does not require VLAN tagging.

Sorry - I meant fibre.  Have been using cable previously.




Software Engineer

 


1319 posts

Uber Geek
+1 received by user: 464


  Reply # 1441255 6-Dec-2015 09:32
Send private message

You could get a cheap switch to handle VLAN tagging and continue using your Airport?

306 posts

Ultimate Geek
+1 received by user: 44


  Reply # 1441258 6-Dec-2015 09:47
Send private message

DarkShadow: You could get a cheap switch to handle VLAN tagging and continue using your Airport?


You already have the Huawei, so just use it to do the VLAN stuff and get the Airport to handle the rest.

9 posts

Wannabe Geek


  Reply # 1441470 6-Dec-2015 18:16
Send private message

I am also having an issue with the 5Ghz wifi randomly disconnected (although 2.4 seems fine).


I was playing with HG659 recently and I found this firmware update. Did you check if you are running the latest firmware and does the latest firmware fix the WIFI issues?

http://help.vodafone.co.nz/app/answers/detail/a_id/24400/

Release notes from Vodafone
"The new firmware includes improvements to wifi, DNS, phone features like caller id, and adds some new features like guest wifi."
https://community.vodafone.co.nz/t5/Modems-home-Wi-Fi/Vodafone-HG659-firmware-update-released/td-

25459 posts

Uber Geek
+1 received by user: 5269

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 1441477 6-Dec-2015 18:49
Send private message

huckster:
DarkShadow: You could get a cheap switch to handle VLAN tagging and continue using your Airport?


You already have the Huawei, so just use it to do the VLAN stuff and get the Airport to handle the rest.


Because then you'll typically end up with double NAT.



9 posts

Wannabe Geek


  Reply # 1441483 6-Dec-2015 19:00
Send private message

 
Because then you'll typically end up with double NAT.


I am pretty sure double NAT is not the problem because I use multiple routers in Australia and I currently have two routers connected to the Optus router/modem. The two routers are in double NAT configuration and I don't have problems accessing internet from both routers via double NAT.

FYI, both routers are running Gargoyle router firmware and I can see more details/info than you can using typical factory firmware ;)

4410 posts

Uber Geek
+1 received by user: 1244


  Reply # 1441485 6-Dec-2015 19:04
Send private message

ericwong:
 
Because then you'll typically end up with double NAT.


I am pretty sure double NAT is not the problem because I use multiple routers in Australia and I currently have two routers connected to the Optus router/modem. The two routers are in double NAT configuration and I don't have problems accessing internet from both routers via double NAT.

FYI, both routers are running Gargoyle router firmware and I can see more details/info than you can using typical factory firmware ;)


Basic web browsing generally won't break, but try running anything that requires a public IP...

40 posts

Geek
+1 received by user: 2


  Reply # 1441490 6-Dec-2015 19:14
Send private message

sbiddle:
huckster:
DarkShadow: You could get a cheap switch to handle VLAN tagging and continue using your Airport?


You already have the Huawei, so just use it to do the VLAN stuff and get the Airport to handle the rest.


Because then you'll typically end up with double NAT.




Setting the Airport to "bridge mode" should avoid the double NAT issue. I have an older Airport with the Spark 659b version and its fine.

9 posts

Wannabe Geek


  Reply # 1441495 6-Dec-2015 19:45
Send private message

 

Basic web browsing generally won't break, but try running anything that requires a public IP...


This is not a problem either, just need to set port forwarding on both routers ;)
Have been doing that for years for my private home ftp server.



1196 posts

Uber Geek
+1 received by user: 110


  Reply # 1443039 8-Dec-2015 19:18
Send private message

Hi thanks for your replies folks. 

 

I believe I do have the latest firmware, but at the end of the day I really want to remove the Huawei altogether.  Hence I would like to know what other devices are around with the features I listed above.





Software Engineer

 


20265 posts

Uber Geek
+1 received by user: 3826

Trusted
Subscriber

  Reply # 1443076 8-Dec-2015 20:07
Send private message

ericwong:
 

Basic web browsing generally won't break, but try running anything that requires a public IP...


This is not a problem either, just need to set port forwarding on both routers ;)
Have been doing that for years for my private home ftp server.


If you are manually port fowarding then you can do that, but for upnp it is just broken. cascaded nat is not a supported configuration for it.




Richard rich.ms



1196 posts

Uber Geek
+1 received by user: 110


  Reply # 1445681 9-Dec-2015 18:57
Send private message

Port forwarding on my unit only appears to work by mac address and I need to do it by IP.  Also, it doesn't seem to work across the wifi network (lan cable only it appears).

I do like the option of having a dedicated [intelligent] switch connected to my fibre unit and just hanging my airport off of that for the wifi.  I use windows server for A/D, DNS and DHCP or sometimes my airport - so all it needs to do is have a firewall and perform NAT (I guess).

Alternatively, upgrading to a new wifi unit would be good. I am liking the sound of some of these new units that can combine the 2.4 and 5Ghz together.  Just don't want one that offers cloud services and the like.




Software Engineer

 


1911 posts

Uber Geek
+1 received by user: 604

Subscriber

  Reply # 1449405 12-Dec-2015 22:21
Send private message

Sounds like you have outgrown consumer grade routers. So get a Ubiquity Edge router lite or a Mikrotic router. Then you can configure it however you like.





 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Vodafone TV — television in the cloud
Posted 17-Oct-2017 19:29


Nokia 8 review: Classy midrange pure Android phone
Posted 16-Oct-2017 07:27


Why carriers might want to embrace Commerce Commission study, MVNOs
Posted 13-Oct-2017 09:42


Fitbit launches Ionic, its health and fitness smartwatch
Posted 12-Oct-2017 15:52


Xero launches machine learning automation to improve coding accuracy for small businesses
Posted 12-Oct-2017 15:45


Bank of New Zealand uses Intel AI to detect financial crime
Posted 12-Oct-2017 15:39


Sony launches Xperia XZ1, a smartphone with real-time 3D capture
Posted 11-Oct-2017 10:26


Notes on Nokia’s phone comeback
Posted 10-Oct-2017 10:06


Air New Zealand begins Inflight Wi-Fi rollout
Posted 9-Oct-2017 20:16


The latest mobile phones in perspective
Posted 9-Oct-2017 18:34


Review: Acronis True Image 2018 — serious backup
Posted 8-Oct-2017 11:22


Lenovo launches ThinkPad Anniversary Edition 25
Posted 7-Oct-2017 23:16


Less fone, more tech as Vodafone gets brand make-over
Posted 6-Oct-2017 08:16


API Talent Achieves AWS MSP Partner Status
Posted 5-Oct-2017 21:20


Stellar Consulting Group now a Domo Partner
Posted 5-Oct-2017 21:03



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.