Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




66 posts

Master Geek
+1 received by user: 2


Topic # 192138 28-Feb-2016 19:03
Send private message

I moved into my new (never been lived in) house yesterday and can't get my internet working and in need of help.

I'm currently on the wait list for a spark fibre install, so got given a modem that could do both fibre and DSL until the install.

The problem is that my house doesn't have a single phone jack, but RJ45 jacks in every room. If I plug my DSL modem into this using the Ethernet cable (not the phone cable and filter) I get the power and WAN light going, but no internet light. I don't know if means I can't use it this way or is it possible my house isn't connected at all to the communications infrastructure? (The power people couldn't do a remote connection and needed to come on site)

What am I missing? How can I test if my house is connected?

View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2 | 3
4619 posts

Uber Geek
+1 received by user: 1394


  Reply # 1500893 28-Feb-2016 19:08
Send private message

Is there a copper line coming into the house. if so, where?

 

Presumably with RJ45 everywhere you have a structured cabling system of some sort (good!), so if there is a copper connection, it's likely at the patch panel where all the network cables go back to - can you post a photo of this?


20686 posts

Uber Geek
+1 received by user: 4008

Trusted
Subscriber

  Reply # 1500895 28-Feb-2016 19:12
Send private message

If it is a new house, there may not even be any copper service to it. Chances are there is a panel in the garage or similar utility room all those RJ45's go back to, which may have the incoming copper connection also on a socket inside it. Find that panel and take a photo of it for more assistance.





Richard rich.ms

 
 
 
 


412 posts

Ultimate Geek
+1 received by user: 100


  Reply # 1500896 28-Feb-2016 19:12
Send private message

A couple of missing things here

 

1. has Spark connected a DSL service to the house; if not there is your first problem

 

2. as you only have RJ45's I would be guessing you have a star wired system; somewhere there will be a cupboard with lots of connections (maybe in the garage)
you will need to connect the socket you are trying to use to connect to the phone line, then the modem RJ11 to the RJ45





 The views expressed by me are not necessarily those of my employer


6038 posts

Uber Geek
+1 received by user: 939

Trusted
Lifetime subscriber

  Reply # 1500897 28-Feb-2016 19:16
Send private message

Are you on a naked plan? If not, do you get a dialtone if you connect a phone? Obviously you'll need an adapter if your phone has a BT plug :)




66 posts

Master Geek
+1 received by user: 2


  Reply # 1500898 28-Feb-2016 19:17
Send private message

Thanks for the quick reply. It doesn't look like it... Looks like a splitter for the aerial and a patch panel for fibre?

Click to see full size

25943 posts

Uber Geek
+1 received by user: 5630

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1500899 28-Feb-2016 19:17
Send private message

Firstly as you got a DSL connection you need to plug a cable from the wall socket into the DSL port on your router, not the Ethernet port.

 

I assume you didn't have a Chorus technician visit? Is your house actually connected up to copper and have a connection to the wiring cupboard which will be located somewhere?

 

 




66 posts

Master Geek
+1 received by user: 2


  Reply # 1500901 28-Feb-2016 19:24
Send private message

A couple of quick replies:
- no chorus technician has been out since I've had the house
- I'm on naked broadband
- spark texted me a few days ago to say my internet connection is live

25943 posts

Uber Geek
+1 received by user: 5630

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1500902 28-Feb-2016 19:27
Send private message

You need to find your wiring cupboard/patch panel, ensure the incoming phone line is hooked to the RJ45 sockets throughout the house, and hook your modem up with the correct cable. Unfortunately Spark aren't going to be able to help you with this.

 

 


25943 posts

Uber Geek
+1 received by user: 5630

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1500904 28-Feb-2016 19:28
2 people support this post
Send private message

SomePostman: Thanks for the quick reply. It doesn't look like it... Looks like a splitter for the aerial and a patch panel for fibre?

Click to see full size

 

What a shocker.

 

You also need to find the person who wired up the house and get them to come back and install things correctly. Tell them you will not pay for this as it's been installed incorrectly. If they don't understand why it's wrong then it further emphasises what a terrible job they've done.

 

Assuming the first pair is the incoming phone line then using the correct cable to plug your modem in may work, but it doesn't change the fact somebody has done a terrible job wiring this up.

 

 




66 posts

Master Geek
+1 received by user: 2


  Reply # 1500907 28-Feb-2016 19:35
Send private message

sbiddle:

SomePostman: Thanks for the quick reply. It doesn't look like it... Looks like a splitter for the aerial and a patch panel for fibre?

Click to see full size


What a shocker.


You also need to find the person who wired up the house and get them to come back and install things correctly. Tell them you will not pay for this as it's been installed incorrectly.


Assuming the first pair is the incoming phone line then using the correct cable to plug your modem in may work, but it doesn't change the fact somebody has done a terrible job wiring this up.


 



I didn't build the house, I got a good deal on an earthquake rebuild. I don't know what this should look like, why is it such a bad job?

It may or may not be related but I can't even get freeview to work. Instead of what now my kids could only watch al-jazeera this morning lol

7254 posts

Uber Geek
+1 received by user: 2310

Subscriber

  Reply # 1500909 28-Feb-2016 19:39
Send private message

ultimately if the person who installed it wont come back to fix it you will probably need to pay someone to fix it for you.


BDFL - Memuneh
59586 posts

Uber Geek
+1 received by user: 10759

Administrator
Trusted
Geekzone
Lifetime subscriber

  Reply # 1500910 28-Feb-2016 19:39
Send private message

@sbiddle better tell what is wrong because not everyone will know from your comments.





4619 posts

Uber Geek
+1 received by user: 1394


  Reply # 1500912 28-Feb-2016 19:44
Send private message

freitasm:

 

@sbiddle better tell what is wrong because not everyone will know from your comments.

 

 

 

 

The cables from the jacks around the house are all punched down together on the same block - essentially they are all in parallel, connected together, so can't be used as individual jacks. In the current config, they are suitable for voice only, no network capability, and xDSL would be pretty marginal as well.

 

The solution is each cable punched down to a separate RJ45, which you can then use patch cables to connect to a switch, or patch a phone line through to.


2086 posts

Uber Geek
+1 received by user: 517


  Reply # 1500913 28-Feb-2016 19:45
Send private message

Assuming you have the HG659b

 

It should have come with a few different cables

 

 

You need to use the VDSL cable, it has an RJ45 on one end, and a smaller RJ11 on the other end

 

Connect it from your wall to the DSL port on the modem, NOT the blue WAN port.

 

This is assuming your house has copper connected up to that distribution box


4619 posts

Uber Geek
+1 received by user: 1394


  Reply # 1500914 28-Feb-2016 19:46
Send private message

From the OP's pic, doesn't look like there is a copper line in. Assuming this is a new build, you'd need to check one has even been run to the house, it's possible there is no phone line at all. If it's a rebuild on a previously used site, then Chorus records may show it as having an intact line, even if it doesn't - which is why the ISP would say it is connected.


 1 | 2 | 3
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel reimagines data centre storage with new 3D NAND SSDs
Posted 16-Feb-2018 15:21


Ground-breaking business programme begins in Hamilton
Posted 16-Feb-2018 10:18


Government to continue search for first Chief Technology Officer
Posted 12-Feb-2018 20:30


Time to take Appleā€™s iPad Pro seriously
Posted 12-Feb-2018 16:54


New Fujifilm X-A5 brings selfie features to mirrorless camera
Posted 9-Feb-2018 09:12


D-Link ANZ expands connected smart home with new HD Wi-Fi cameras
Posted 9-Feb-2018 09:01


Dragon Professional for Mac V6: Near perfect dictation
Posted 9-Feb-2018 08:26


OPPO announces R11s with claims to be the picture perfect smartphone
Posted 2-Feb-2018 13:28


Vocus Communications wins a place on the TaaS panel
Posted 26-Jan-2018 15:16


SwipedOn raises $1 million capital
Posted 26-Jan-2018 15:15


Slingshot offers unlimited gigabit fibre for under a ton
Posted 25-Jan-2018 13:51


Spark doubles down on wireless broadband
Posted 24-Jan-2018 15:44


New Zealand's IT industry in 2018 and beyond
Posted 22-Jan-2018 12:50


Introducing your new workplace headache: Gen Z
Posted 22-Jan-2018 12:45


Jucy set to introduce electric campervan fleet
Posted 22-Jan-2018 12:41



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.