Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


13 posts

Geek


Topic # 196499 2-Jun-2016 11:51
Send private message

Hi I need someone to install Cat5E/Cat6, extruded mount rj45 jacks, and possibly a 4-5way patch panel amongst 4 rooms. One room near the VDSL router will have the patch panel and a gigabit switch which we already own. The other 3 will just have a single socket each most likely. Each cable run is approximately 5-10 metres max.

 

I started doing this myself, but managed to destroy my cheap plastic punchdown tool, then used a flat edge screwdriver instead which (if I'm guessing correctly) leveraged the blade connectors too far apart on the back of the sockets so that they did not puncture the insulation on the cable cores properly. Lessons learned.

 

As I've already drilled holes, and purchased face plates which are now screwed on to the wall I'd like someone to add on to what I've already done so my time was not wasted.

 

Thanks. Personal messages most welcome.

 

(I've had two very expensive qoutes from companies found in the yellow pages already, including one from a pushy SA guy who insisted that he knew better what we wanted than I did and kept trying to upsell us extra stuff we do not want or need. I just want someone affordable who listens to what we want, and does it.)

 

 

 

 


Create new topic
2382 posts

Uber Geek
+1 received by user: 694

Trusted
Lifetime subscriber

  Reply # 1564138 2-Jun-2016 11:55
Send private message

GZ user @coffeebaron offers to assist with master filter cabling for VDSL connections.  I wonder if he would give you a bit of a hand with this.  If you have already done the hard work of running the cables, punching down into outlets may be trivial for someone with his considerable skills.





"4 wheels move the body.  2 wheels move the soul."

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams



13 posts

Geek


  Reply # 1564158 2-Jun-2016 12:03
Send private message

Cheers, I had him in mind already but was reaching out to other smallish companies or sole contractors as I'd like to support my fellow geeks by putting out this small tender.

 

I've only done one cable run and I used flexible Cat5e from a very long patch cable I've had for years, which I chopped the end plugs off. Obviously this was pretty cowboy of me but I really hate throwing stuff out and tend to be a bit of a hoarder. ( A recovering one I like to think, as I've manged to biff out more in the last year than in a longtime.)


4849 posts

Uber Geek
+1 received by user: 1508


  Reply # 1564185 2-Jun-2016 12:28
2 people support this post
Send private message

If you've used stranded cable, it probably won't punch down properly into the connectors - you'll end up with flaky connections with intermittent faults. Best to use solid cable, even if you have to buy a few metres...




13 posts

Geek


Reply # 1564188 2-Jun-2016 12:38
Send private message

RunningMan:

 

If you've used stranded cable, it probably won't punch down properly into the connectors - you'll end up with flaky connections with intermittent faults. Best to use solid cable, even if you have to buy a few metres...

 

 

Stopping to visualize it for a second, this makes perfect sense as the strands would shift around inside the sheath plus the diameter of the cable might not be the same as with solid. I was considering soldering straight to the connectors even. I wish the two multipage wikipedia articles I printed out on cat cables, and ethernet had mentioned this.


21131 posts

Uber Geek
+1 received by user: 4215

Trusted
Subscriber

  Reply # 1564192 2-Jun-2016 12:43
Send private message

You will have to crimp a plug on the end of the cable and use a double socketed passthru keystone if you still want wallplates.





Richard rich.ms

4849 posts

Uber Geek
+1 received by user: 1508


  Reply # 1564195 2-Jun-2016 12:48
3 people support this post
Send private message

Basically, solid cable for permanent installations. Stranded is only used for patch cables - the cable has to be more flexible and resistant to breaking/bending.

 

EDIT: Should have joined GZ earlier and asked here wink


Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

N4L helping TAKA Trust bridge the digital divide for Lower Hutt students
Posted 18-Jun-2018 13:08


Winners Announced for 2018 CIO Awards
Posted 18-Jun-2018 13:03


Logitech Rally sets new standard for USB-connected video conference cameras
Posted 18-Jun-2018 09:27


Russell Stanners steps down as Vodafone NZ CEO
Posted 12-Jun-2018 09:13


Intergen recognised as 2018 Microsoft Country Partner of the Year for New Zealand
Posted 12-Jun-2018 08:00


Finalists Announced For Microsoft NZ Partner Awards
Posted 6-Jun-2018 15:12


Vocus Group and Vodafone announce joint venture to accelerate fibre innovation
Posted 5-Jun-2018 10:52


Kogan.com to launch Kogan Mobile in New Zealand
Posted 4-Jun-2018 14:34


Enable doubles fibre broadband speeds for its most popular wholesale service in Christchurch
Posted 2-Jun-2018 20:07


All or Nothing: New Zealand All Blacks arrives on Amazon Prime Video
Posted 2-Jun-2018 16:21


Innovation Grant, High Tech Awards and new USA office for Kiwi tech company SwipedOn
Posted 1-Jun-2018 20:54


Commerce Commission warns Apple for misleading consumers about their rights
Posted 30-May-2018 13:15


IBM leads Call for Code to use cloud, data, AI, blockchain for natural disaster relief
Posted 25-May-2018 14:12


New FUJIFILM X-T100 aims to do better job than smartphones
Posted 24-May-2018 20:17


Stuff takes 100% ownership of Stuff Fibre
Posted 24-May-2018 19:41



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.