new modem setup

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › new modem setup

Fastlemons

63 posts

Master Geek

#20526 29-Mar-2008 11:34

hi i have just peurchased a new modem the dynalink 770 and i am unsure how to set it up it arrives today hopefully but to i just write downall my past settings and change them or is there an easier way.

zocster

1918 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#119498 29-Mar-2008 11:44

hmm who's your ISP? each has different set up

MightyApe

Affiliate link

Affiliate link: You will find anything you want at MightyApe.

Fastlemons

63 posts

Master Geek

#119505 29-Mar-2008 11:55

my isp is xtra, we upgrading as 502t does not run quickly with 2 pcs connected

zocster

1918 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#119508 29-Mar-2008 12:05

you should be able to go here to find out all about your modem here.

login to your modem use the user manual and as long as you remember where to put the .xadsl I always get confused with them usernames and your password, you'll be away laughing.

Spyware

2996 posts

Uber Geek

Lifetime subscriber

#119512 29-Mar-2008 12:29

Most likely reason for 2 PCs slowing connection is a plan with 128 kbps upload speed.

Spark Max Fibre using Mikrotik CCR1009-8G-1S-1S+, CRS125-24G-1S, UAP, UAP AC Pro, UAP AC Pro Mesh, Apple TV 4, Apple TV 4K, iPad Air 1st gen, iPad Air 4th gen, iPhone 13, VodaTV Gen 2. If it doesn't move then it's data cabled.

Fastlemons

63 posts

Master Geek

#119518 29-Mar-2008 13:19

unfortunatley its not comming till monday but i need to know whether you can change the wan ip on it as mum is connecting a vpn and the wan ip has been added to the list and its apparently alot of paperwork to change.

Spyware

2996 posts

Uber Geek

Lifetime subscriber

#119524 29-Mar-2008 13:51

Xtra provide the WAN side public ip address via a DHCP server. You have no control over this and each time the router reboots it will get a different ip address unless you request a static ip address. If you want a static ip address than contact Xtra and request one https://www.telecom.co.nz/form/1,,5208,00.html. You will be charged extra unless on Pro plan.

Once you have a static ip address any router using the appropriate credentials, username and password, will always be given this address.

Fastlemons

63 posts

Master Geek

#119525 29-Mar-2008 13:58

so what your saying is that my wan ip will not change?

Spyware

2996 posts

Uber Geek

Lifetime subscriber

#119526 29-Mar-2008 14:06

Correct, it won't change if already on static lease. Only settings apart from username.xadsl@xtra.co.nz and password are PPPoA VC MUX, VCI=100, VPI=0.

zocster

1918 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#119527 29-Mar-2008 14:13

Spyware: Correct, it won't change if already on static lease. Only settings apart from username.xadsl@xtra.co.nz and password are PPPoA VC MUX, VCI=100, VPI=0.

Hmm I've just heard the other day that Telecom is supporting PPoE as well not just A would anyone dare to confirm this?