Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




5 posts

Wannabe Geek


# 214412 10-May-2017 13:22
Send private message

hi all.

 

Id like to be able to set up a vip at home, both for privacy and to get around some geoblocks.

 

My current network has a Spark supplied Huawei HG659b router in a cupboard that's connected to the Chorus ONT (fibre 100), then to a switch, and then via patch panel and cat 6 cabling to lan ports throughout the house. theres 2 x lan ports in every room. in 4 of the rooms i have wifi access points (airport extremes and expresses for wifi ... (the expresses are mainly for the airplay of music vs 'just' wifi access).

 

The wifi on the huawei is turned off as it was flaky, and I didn't need it. My laptops, devices, etc, seemed to be able to move from access point to access point as long as they were all apple, but moving from the 'huawei' room to a different room never seemed to work.

 

So, the VPN........  the huawei won't do VPN, apparently, and whilst I have set up and installed vpn software on a couple devices, and have changed the dns on the apple tv to access other country 'media' within existing apps, I can't access any other app stores. to do this, apparently, ill need to install the vpn further up the chain - i.e. on a router, not on the atv. And when / if I do this, I can no longer access NZ stuff like TV3 or Lightbox, unless I airplay, which gets annoying when I'm trying to watch tv and do laptop stuff at the same time.

 

Id like to add a second router, one that has gigabit lan, but doesnt need wifi. Id probably like this to be able to run a third party firmware like Tomato or DD WRT as I Imagine Ill be futzing with its settings a bit. It doesn't need to do much apart from be a good router, and hopefully allow me to store different vpn settings and switch between them easily. Anyone have recommendations?

 

And then I can't decide where to site it within the topology. If I put it in the cupboard with the other router, switch, and patch panel, and use the patch panel judiciously (i.e. bypassing the switch) Im guessing I can use lan ports in different rooms to differentiate between the 'foreign' router and the NZ one. Bearing in mind the laptops can use the vpn client anyway, and I don't care about phones and tablets being in 'new zealand'.... But maybe its just easier to locate it after the switch in the room where it will be used most and plug the ATV into that? what will work best from a not-buggy POV? and what settings would I put into the two different routers to make this work

 

 


Create new topic
15011 posts

Uber Geek

Trusted
Subscriber

  # 1779096 10-May-2017 14:40
Send private message

When you say "set up a VIP" I think you mean set up a VPN. Do you need to VPN your whole internet connection, just one device, or a subset of devices? Do you need to change the target country regularly? A VPN will slow your internet access.

 

You could perhaps add a gateway on your network that connects to a VPN, then point whatever device needs VPN access at that gateway. You can do that with a Raspberry Pi. I tried it once but got bored before I got it going.


256 posts

Ultimate Geek


  # 1779131 10-May-2017 15:57
Send private message

A bit of a PSA, but when you say privacy you really only mean privacy from your ISP right?

 

Setting up a VPN with a 3rd Party means that the 3rd Party, and their ISP etc, get to track your stuff. Their and your ISP probably won't be able to link your traffic out of the VPN to you, but the 3rd Party can. Basically, I'm suggesting choose a reputable VPN provider.


 
 
 
 


Go Hawks!
943 posts

Ultimate Geek

Trusted
Subscriber

  # 1779136 10-May-2017 16:14
Send private message

Mine is managed by turning off the DHCP server on the Huawei, then I have a separate device handling DHCP and DNS for my LAN.  The DHCP tells the computers where to go for it's DNS settings, and the DNS server (dnsmasq) has a configuration to assist with where to point certain things (along with giving me a way of giving each device on my LAN it's own DNS entry, making some things very easy to remember...)

 

That coupled with a DNS service that provides a workaround geoblocks would complete the second part of your requirement.

 

You could use the DHCP server to hand out a default gateway that goes directly to a VPN endpoint to certain (or all) computers, as opposed to going directly to the Huawei - that would help with getting a VPN going.  WRT to privacy, I would take note of what xontech has mentioned above.


965 posts

Ultimate Geek

Trusted

  # 1779184 10-May-2017 17:35
Send private message

The HG659 is actually pretty sweet for home use. You are doing it well. Turning off the rubbish wifi, and using something a lot better. Also by using WAN port in, and one port on it out and letting at switch do its thing. 

 

I have found if you have a LOT of devices, the DNS on it poops the bed sometimes. 

For VPN you could use a mikrotik?

 

We use this : https://pritunl.com/

 

It works very well.

 

 








5 posts

Wannabe Geek


  # 1779865 11-May-2017 20:25
Send private message

hi all and thanks for replies so far. i guess to be more specific, id like a new router that...

 

 

 

1. has gigabit lan

 

2. supports UFB / vlan tagging (in case I decide later to make it my 'primary' router)

 

3. supports install of dd wrt or tomato, or supports openvpn with its default firmware

 

wifi performance or lack thereof is completely unimportant.

 

being cheap would be good too, but...

 

 

 

ive read the choose a router sticky thread but whilst its interesting its tricky to see if any of the recommendations theirein have the three requirements above.


Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel expands 10th Gen Intel Core Mobile processor family
Posted 23-Aug-2019 10:22


Digital innovation drives new investment provider
Posted 23-Aug-2019 08:29


Catalyst Cloud becomes a Kubernetes Certified Service Provider (KCSP)
Posted 23-Aug-2019 08:21


New AI legaltech product launched in New Zealand
Posted 21-Aug-2019 17:01


Yubico launches first Lightning-compatible security key, the YubiKey 5Ci
Posted 21-Aug-2019 16:46


Disney+ streaming service confirmed launch in New Zealand
Posted 20-Aug-2019 09:29


Industry plan could create a billion dollar interactive games sector
Posted 19-Aug-2019 20:41


Personal cyber insurance a New Zealand first
Posted 19-Aug-2019 20:26


University of Waikato launches space for esports
Posted 19-Aug-2019 20:20


D-Link ANZ expands mydlink ecosystem with new mydlink Mini Wi-Fi Smart Plug
Posted 19-Aug-2019 20:14


Kiwi workers still falling victim to old cyber tricks
Posted 12-Aug-2019 20:47


Lightning Lab GovTech launches 2019 programme
Posted 12-Aug-2019 20:41


Epson launches portable laser projector
Posted 12-Aug-2019 20:27


Huawei launches new distributed HarmonyOS
Posted 12-Aug-2019 20:20


Lenovo introduces single-socket servers for edge and data-intensive workloads
Posted 9-Aug-2019 21:26



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.