Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




5 posts

Wannabe Geek


Topic # 224372 15-Nov-2017 09:16
Send private message quote this post

I have an external/outdoor wifi aerial to USB to extend our home network to the office/workshop.

 

Can I use this aerial to provide input to a wifi repeater of some description and what would I need for hardware?


Create new topic
408 posts

Ultimate Geek
+1 received by user: 77


  Reply # 1901093 15-Nov-2017 09:27
Send private message quote this post

Probably need to include some information around the aerial as typically antenna's don't have USB plugs on them.

 

As a general guide though you would need a wireless access point that accepts external antenna's and then ethernet cable the AP back to your main network.


866 posts

Ultimate Geek
+1 received by user: 264


  Reply # 1901098 15-Nov-2017 09:34
Send private message quote this post

The answer is "it's possible but would require a very high level of technical expertise."  How far is the office/workshop from the house, what is it clad in (i.e. is there roofing iron on the walls, that blocks wifi pretty well)?


 
 
 
 


1800 posts

Uber Geek
+1 received by user: 263

Subscriber

  Reply # 1901101 15-Nov-2017 09:40
Send private message quote this post

Grumwaru:

 

I have an external/outdoor wifi aerial to USB to extend our home network to the office/workshop.

 

Can I use this aerial to provide input to a wifi repeater of some description and what would I need for hardware?

 

 

Provide make and model of said antenna and/or photograph.





Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test




5 posts

Wannabe Geek


  Reply # 1901190 15-Nov-2017 12:07
Send private message quote this post

The aerial I am using was purchased from Jaycar and is the same as this: https://nz.dhgate.com/product/wholesale-outdoor-high-power-wifi-usb-adapter/401624433.html#hugsave-0-null


866 posts

Ultimate Geek
+1 received by user: 264


  Reply # 1901192 15-Nov-2017 12:12
Send private message quote this post

Grumwaru:

 

The aerial I am using was purchased from Jaycar and is the same as this: https://nz.dhgate.com/product/wholesale-outdoor-high-power-wifi-usb-adapter/401624433.html#hugsave-0-null

 

 

Yeah that's not much help unless we know what chip is inside it.  There are a bunch of cheap USB wifi adapters that look identical to that, which have different chips in them.  I know because I have an old (~10 years?) one.

 

To make this work you'd need to use a PC or a reflashed router (only certain makes & models will work) as a wireless access point, with software that supported the particular model chip that was in the wifi adapter you have purchased.

 

How much is your time worth, how confident are you that you could do this with forum-level handholding?




5 posts

Wannabe Geek


  Reply # 1901196 15-Nov-2017 12:20
Send private message quote this post

I was looking for a quick off the shelf solution with low input on my part, I am not that confident technically.

 

The current setup is a SPARK router HG630b at the house - outdoor aerial mounted on top of the workshop (20m away) and then that is connected to my laptop USB port. I chose this setup as the long run cladding of the building is pretty effective in killing any direct wifi link to the house.

 

Thanks

 

 


866 posts

Ultimate Geek
+1 received by user: 264


  Reply # 1901231 15-Nov-2017 12:53
Send private message quote this post

The simple  option is to mount an outdoor client wifi radio like this https://www.gowifi.co.nz/wireless-access-points-outdoor/ens202.html to the outside of your shed, and if it doesn't give good enough signal inside the shed, plug a wireless access point into it, inside the shed.


142 posts

Master Geek
+1 received by user: 56


  Reply # 1902475 15-Nov-2017 22:05
Send private message quote this post

How far is it from the point where the access point would be mounted and the users in the external shed?  If it is quite a distance or there is large signal loss passing through the perimeter shed wall then you risk having a high data rate from the access point to the clients but a low data rate back.  In this event you may be better to have an access point on the main building and the external shed.




5 posts

Wannabe Geek


  Reply # 1902500 16-Nov-2017 06:28
Send private message quote this post

Thanks for all your input, I will try the outside wireless access point and also have trialed Connectify on the laptop that is working OK to xtend the wireless coverage to other devices in the office/shed. Great feedback team appreciate the input


1952 posts

Uber Geek
+1 received by user: 128

Trusted

  Reply # 1906406 23-Nov-2017 13:26
One person supports this post
Send private message quote this post

To be clear, you have not purchased a simple aerial. You have a "WiFi USB Adapter 150Mbps Wireless Network Card Signal Receiver" with an aerial on it. Its basically a wifi dongle that needs to plug into a computer that can install driver software to run it. You would then need to setup windows to connect to the house internal network, but it won't support a wireless printer or anything. If you have only a single computer in the office and no other network out there, it would be suitable to be permanently on the office computer with the aerial going outside the building. It probably still needs a better signal from the house than you have at the moment, hence the need for an access point at the house.

 

You may be able to move your existing wifi to another room that gives a better signal to the shed. You also want the USB cable going out of the shed in a way that creates a drip loop, to prevent rain dripping down the cable straight into your computer!





Qualified in business, certified in fibre, stuck in copper, have to keep going  ^_^



5 posts

Wannabe Geek


  Reply # 1906895 24-Nov-2017 08:38
Send private message quote this post

Thanks for the clarity of your response, I now have a clear plan going forward and appreciate all the assistance.


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand hits peak broadband data
Posted 18-Jan-2018 12:21


Amazon Echo devices coming to New Zealand early February 2018
Posted 18-Jan-2018 10:53


$3.74 million for new electric vehicles in New Zealand
Posted 17-Jan-2018 11:27


Nova 2i: Value, not excitement from Huawei
Posted 17-Jan-2018 09:02


Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52


NOW to deploy SD-WAN to regional councils
Posted 19-Dec-2017 19:46


Mobile market competition issues ComCom should watch
Posted 18-Dec-2017 10:52


New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.