Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




66 posts

Master Geek
+1 received by user: 3


Topic # 225680 30-Nov-2017 10:28
Send private message quote this post

 

 

can i have 2 wifi hotspots in my house with the one broadband connection

 

I have 1 broadband connection(ADSL) that comes into the house. 

 

Landline connects to Router1, where I have wifi from. 

 

Can I put a lan cable in the router and run it to the other end of the house and plug it into Router2, and then serve a 2nd wifi from this Router2? 

 

 

 

Sorry not too techy in this area. But hope what i am trying to do is clear. Let me know any clarifications.

 

 


Create new topic
1293 posts

Uber Geek
+1 received by user: 317


  Reply # 1910936 30-Nov-2017 10:40
Send private message quote this post

Yes. This is the recommended way to extent the wireless footprint of a network.

 

Further you can actually use various common wireless routers as another 'hotspot' by disabling the routing functions, in this configuration it is working as an 'access point'


1480 posts

Uber Geek
+1 received by user: 360


  Reply # 1910937 30-Nov-2017 10:40
Send private message quote this post

Yes. Buy an off the shelf access point that’s in bridge mode

 
 
 
 


1413 posts

Uber Geek
+1 received by user: 309

Trusted

  Reply # 1910940 30-Nov-2017 10:45
One person supports this post
Send private message quote this post

Have a Look at this recent thread for instructions

https://www.geekzone.co.nz/forums.asp?forumId=66&topicId=225521



66 posts

Master Geek
+1 received by user: 3


  Reply # 1911020 30-Nov-2017 11:54
Send private message quote this post

tks I will have a look at that. 

 

I have a 2degrees router/fritz box as my router. I have a genius/old orcon router lying around that I would like to use as my 2nd Router/ 2nd AccessPoint. Any links on how to do this specifically?

 

tks 


2671 posts

Uber Geek
+1 received by user: 636


  Reply # 1911055 30-Nov-2017 12:30
One person supports this post
Send private message quote this post

I've used a wide range of unused modem/routers for this very purpose, and it's fairly straight-forward (I see someone's linked above to a 'how to'). Personally, I don't think it's worth buying a new device for this purpose if you've already got an old router hanging around, provided that offers decent wifi. Often googling the model number and other key words will provide you with direct instructions on how to do it, or at least find the manual so you can easily find out where to do stuff like switching off DHCP.

 

It can be useful to select a position for the 'access point' that's also where you want wired access for devices, eg ours is directly beside the TV and stereo (so allows wired connections to the TiVo, Amazon Fire, Squeezebox etc).

 

The one issue you may face is hand-over between the two wifi access points can be somewhat messy (and one of the reasons I'm tempted by a mesh-based solution). By this I mean our devices will often hold onto the connection to one access point even when down the opposite end of the house, and the only solution is to force it to connect to the closer router (on my phone I do this by just quickly disabling and re-enabling  wifi). I've read some people reduce the power output of the routers so the signal strength dies off earlier (hopefully forcing a switch to the closer router), but I didn't find that worked for me.

 

I've also not received clear advice as to whether it's better to use the same SSID for both access points (or even for 2.4 and 5 GHz, so the potential of four separate SSIDs); currently I run the different SSIDs for 2.5 and 5 but these are the same for both access points. Always interested in being advised as to best practice in this area, though!

 

 


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand hits peak broadband data
Posted 18-Jan-2018 12:21


Amazon Echo devices coming to New Zealand early February 2018
Posted 18-Jan-2018 10:53


$3.74 million for new electric vehicles in New Zealand
Posted 17-Jan-2018 11:27


Nova 2i: Value, not excitement from Huawei
Posted 17-Jan-2018 09:02


Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52


NOW to deploy SD-WAN to regional councils
Posted 19-Dec-2017 19:46


Mobile market competition issues ComCom should watch
Posted 18-Dec-2017 10:52


New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.