Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




36 posts

Geek
+1 received by user: 6


Topic # 226155 23-Dec-2017 10:37
Send private message quote this post

I have read through this topic an have basic understanding. I think if i do enough research i should be able to sort this out.

[]https://cdn.geekzone.co.nz/imagessubs/f35e640b93904381070973a8920423d9.jpg[/imgthumb]

Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2 | 3 | 4
25826 posts

Uber Geek
+1 received by user: 5555

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1923951 23-Dec-2017 10:43
2 people support this post
Send private message quote this post

Is somebody not coming back to finish the wiring job?


394 posts

Ultimate Geek
+1 received by user: 120


  Reply # 1923953 23-Dec-2017 10:50
One person supports this post
quote this post

Would you want that installer back?


 
 
 
 


25826 posts

Uber Geek
+1 received by user: 5555

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1923960 23-Dec-2017 11:02
2 people support this post
Send private message quote this post

k1w1k1d:

 

Would you want that installer back?

 

 

There is nothing in that photo to suggest they're no good.. It's just simply a job that's not finished.

 

 




36 posts

Geek
+1 received by user: 6


  Reply # 1923963 23-Dec-2017 11:05
Send private message quote this post

I need to confirm contract with my sparky but i suspect my contract with him was was to just run the cables. He did make mention earlier about a cable guy sorting out my tv's.

Anyway, if he is not going to do it its down to either me or the cable guy in which case i ok with trying to work through it.

25826 posts

Uber Geek
+1 received by user: 5555

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1923964 23-Dec-2017 11:06
Send private message quote this post

I guess it also depends what you actually want to do. If you live in an average sized house you'll have a perfectly functional broadband connection right now using WiFi only.

 

All the data cables need to be punched down to a frame and the RG6 terminated and put onto a splitter. If you want Ethernet to outlets you simply need to patch these from the router to the frame once it's installed. 

 

The only problem is (and it's the same problem in pretty much every new build is that leaving the router inside the cabinet if the worse place for it. The metal kills the WiFi, so if you live in a larger sized house you won't get good WiFi coverage.


394 posts

Ultimate Geek
+1 received by user: 120


  Reply # 1924004 23-Dec-2017 11:12
quote this post

The fact that it has been left unfinished when the owner has presumably taken possession of his new house was my main concern.

 

Also looks like it will be rather tight for space once completed?

 

External power point with lead running under edge of lid?


epr

40 posts

Geek
+1 received by user: 9


  Reply # 1924005 23-Dec-2017 11:14
Send private message quote this post

No matter who does it make sure that everything is labelled so that you know where it all goes and comes from.

25826 posts

Uber Geek
+1 received by user: 5555

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1924006 23-Dec-2017 11:17
Send private message quote this post

k1w1k1d:

 

The fact that it has been left unfinished when the owner has presumably taken possession of his new house was my main concern.

 

Also looks like it will be rather tight for space once completed?

 

External power point with lead running under edge of lid?

 

 

It will be very tight for space.

 

I suspect the external power is just because the power plug that's in the cabinet looks like a 2 way vertical which is no good if you have 2 vertical plug packs to fit into it.

 

 


394 posts

Ultimate Geek
+1 received by user: 120


  Reply # 1924016 23-Dec-2017 11:37
quote this post

Shifting the router out of the cabinet will improve WiFi and add some room. Also will be able to use external plug, so won't need to run lead around door.

 

Have sparkies not heard that metal cabinets are a bit like a Faraday Cage?

 

 




36 posts

Geek
+1 received by user: 6


  Reply # 1924061 23-Dec-2017 14:00
Send private message quote this post

sbiddle:

I guess it also depends what you actually want to do. If you live in an average sized house you'll have a perfectly functional broadband connection right now using WiFi only.


All the data cables need to be punched down to a frame and the RG6 terminated and put onto a splitter. If you want Ethernet to outlets you simply need to patch these from the router to the frame once it's installed. 


The only problem is (and it's the same problem in pretty much every new build is that leaving the router inside the cabinet if the worse place for it. The metal kills the WiFi, so if you live in a larger sized house you won't get good WiFi covterage.



Yes, i do have functional wifi but house is large so am getting occasional slow signal. If i understand you correctly the only reason i need data cables connected is to run tv's. ?

I only sat router in box for connection convienence. Have since moved it.

7222 posts

Uber Geek
+1 received by user: 2288

Subscriber

  Reply # 1924079 23-Dec-2017 14:54
One person supports this post
Send private message quote this post

no everything that can be wired should be wired, it will make the experience on wifi so much better.

 

you will likely need a couple of access points to put round the house to ensure good wifi or failing that a mesh kit like the netgear orbi or google wifi.

 

 




36 posts

Geek
+1 received by user: 6


  Reply # 1924107 23-Dec-2017 15:05
Send private message quote this post

Thanks

665 posts

Ultimate Geek
+1 received by user: 229


  Reply # 1924108 23-Dec-2017 15:12
Send private message quote this post

So it's pretty straight-forward to trace where the lines go.

It's a pretty common problem for phone line installers.

The equipment is commonly called a "phone line tracer", or "RJ45 tracer."

Just google "RJ45 tracer site:nz", or look on trademe

Basically it's the tracer has two pieces, a powered box, and a separate wand.

- strip two wires on a cable

- hook a battery powered device on the wires

- use a wand that beeps as you get close to the wire (radio signal?)

Sort of like a Geiger counter.

You can either use it to find the wire in the wall, or just stick the tip near each RJ45 connector, and it'll beep loudly.


20580 posts

Uber Geek
+1 received by user: 3966

Trusted
Subscriber

  Reply # 1924109 23-Dec-2017 15:16
One person supports this post
Send private message quote this post

I got this one which also has the better than nothing blinking light cable tester in it as well - https://www.aliexpress.com/item/High-Quality-RJ11-RJ45-Cat5-Cat6-Telephone-Wire-Tracker-Tracer-Toner-Ethernet-LAN-Network-Cable-Tester/32810274460.html and its great for finding wires.





Richard rich.ms

665 posts

Ultimate Geek
+1 received by user: 229


  Reply # 1924110 23-Dec-2017 15:17
One person supports this post
Send private message quote this post

There is a small chance these wires are live. So if you see three wires, of the same size, don't mess with it.

I suspect the black wires run to your TV, or antenna, or similar.

It'll usually have a thin wire inside, surrounded by a black insulator, then a copper mesh, and more insulators.

The blue wires are probably network cables. They have 8 wires.
Blue & blue and white
Brown & brown & white
Green & green and white
Orange and Orange & white.

 1 | 2 | 3 | 4
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand hits peak broadband data
Posted 18-Jan-2018 12:21


Amazon Echo devices coming to New Zealand early February 2018
Posted 18-Jan-2018 10:53


$3.74 million for new electric vehicles in New Zealand
Posted 17-Jan-2018 11:27


Nova 2i: Value, not excitement from Huawei
Posted 17-Jan-2018 09:02


Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52


NOW to deploy SD-WAN to regional councils
Posted 19-Dec-2017 19:46


Mobile market competition issues ComCom should watch
Posted 18-Dec-2017 10:52


New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.