Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


1423 posts

Uber Geek
+1 received by user: 149

Subscriber

Topic # 228527 10-Jan-2018 12:42
Send private message

I've just picked up a used vigor 130 so that I can utilise my (being delivered) unifi USG as the fritzbox doesn't do bridge mode.

 

I've got the DV130 setup as 192.168.0.1 with DHCP off and my fritzbox is running on 192.168.1.1 (also with DHCP off); I've got a whole bunch of static IPs assigned to various things including my domain controllers so shifting things up by 1 is a no go and I don't actually need to see the vigor on the lan in general - makes it neater for fibre install later too.

 

What I have done so far is:

 

  • Assign a static route on the DV130 to 192.168.1.0 with netmask of 255.255.255.0 and a default gateway of 192.168.0.1
  • Assign a static route on the 7390 to 192.168.0.0. with netmask of 255.255.255.0 and a default gateway of 192.168.1.1

I figured this would be sufficient to be able to route clients from my LAN to the DV130 but it doesn't want to work.

 

Is someone able to point out where I am going wrong? I've never played with subnets before but its always a good time to learn right?!?! Be good to get this sorted before my USG arrives so I can just plug and play!

 

Thanks,

 

 

 

Chris


Create new topic
'That VDSL Cat'
8103 posts

Uber Geek
+1 received by user: 1693

Trusted
Spark
Subscriber

  Reply # 1935491 10-Jan-2018 12:53
Send private message

Just a FYI, the fritz can bridge, it's just a bit of a hack to activate it.

 

 

 

If you don't setup any INet interface, it bridges automatically...

 

static routes look right at a skim.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


1216 posts

Uber Geek
+1 received by user: 273


  Reply # 1935536 10-Jan-2018 13:16
One person supports this post
Send private message

The DV130 will only be performing NAT for 192.168.0.x so devices on 192.168.1.x won't have Internet access.

 

 

Just set the DV130 LAN range be on 192.168.1.x and you can use static routes to forward traffic from the Fritzbox to the DV130 on the same subnet. If that doesn't work you could just use a double NAT setup temporarily.

1976 posts

Uber Geek
+1 received by user: 317

Lifetime subscriber

  Reply # 1935554 10-Jan-2018 13:40
Send private message

Benoire:

 

  • Assign a static route on the DV130 to 192.168.1.0 with netmask of 255.255.255.0 and a default gateway of 192.168.0.1 (Gateway should be the IP address of Fritzbox WAN interface, e.g., 192.168.0.2???)





Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test


1216 posts

Uber Geek
+1 received by user: 273


  Reply # 1935574 10-Jan-2018 13:54
2 people support this post
Send private message

I think OP needs to clarify what type of broadband connection (ADSL / VDSL) they are on.

 

 

If they bought the DV130 to bridge the WAN connection to LAN then you shouldn't need to set up any static routing.

 

 

Just set up the DV130 in PPPoA to PPPoE passthrough (for ADSL) or bridge mode (for VDSL). Instructions here. At most you will need to reconfigure the WAN interface of the Frizbox. e.g. ADSL/VDSL would be untagged PPPoE on the Ethernet WAN port (passthrough or bridged from the DV130).

 

 

The DV130 would be redundant for UFB/fibre.

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Microsoft Dynamics 365 Business Central launches
Posted 10-Jul-2018 10:40


Spark completes first milestone in voice platform upgrade
Posted 10-Jul-2018 09:36


Microsoft ices heated developers
Posted 6-Jul-2018 20:16


PB Technologies charged for its extended warranties and warned for bait advertising
Posted 3-Jul-2018 15:45


Almost 20,000 people claim credits from Spark
Posted 29-Jun-2018 10:40


Cove sells NZ's first insurance policy via chatbot
Posted 25-Jun-2018 10:04


N4L helping TAKA Trust bridge the digital divide for Lower Hutt students
Posted 18-Jun-2018 13:08


Winners Announced for 2018 CIO Awards
Posted 18-Jun-2018 13:03


Logitech Rally sets new standard for USB-connected video conference cameras
Posted 18-Jun-2018 09:27


Russell Stanners steps down as Vodafone NZ CEO
Posted 12-Jun-2018 09:13


Intergen recognised as 2018 Microsoft Country Partner of the Year for New Zealand
Posted 12-Jun-2018 08:00


Finalists Announced For Microsoft NZ Partner Awards
Posted 6-Jun-2018 15:12


Vocus Group and Vodafone announce joint venture to accelerate fibre innovation
Posted 5-Jun-2018 10:52


Kogan.com to launch Kogan Mobile in New Zealand
Posted 4-Jun-2018 14:34


Enable doubles fibre broadband speeds for its most popular wholesale service in Christchurch
Posted 2-Jun-2018 20:07



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.