Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


35 posts

Geek


Topic # 230667 7-Mar-2018 20:32
Send private message

Caveat is that the NF4V will still need to support Orcon Voip.

 

 


Create new topic
26936 posts

Uber Geek
+1 received by user: 6379

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1970892 7-Mar-2018 21:03
One person supports this post
Send private message

You can't have the NF4V (or any modem for that matter) act as a xDSL bridge and provide VoIP services. It's simply not possible since the router is acting as a transparent bridge and doesn't then have a WAN address to route any traffic.

 

 


'That VDSL Cat'
8446 posts

Uber Geek
+1 received by user: 1816

Trusted
Spark
Subscriber

  Reply # 1970894 7-Mar-2018 21:07
Send private message

get your own modem to bridge and stick the NF4V on the inside.

 

 

 

there are posts somewhere around here about extracting SIP logins etc, you could always go down that route.

 

The NF4V's are amazing bridging modems. i run a set of them here. Never misses a beat and broadcom chipset is wide open for polling and playing. 





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.




35 posts

Geek


  Reply # 1970905 7-Mar-2018 21:23
Send private message

Bleh. 

 

Was easier to reconfigure the network. All done and working.
Was irksome that the manual clearly states it had static route support (which is why I went down the Orcon route) when it doesn't work.

 

Oh well. As long as the fandamnily can surf, all is well with the world. :-)

 

 


2009 posts

Uber Geek
+1 received by user: 161

Trusted

  Reply # 1971129 8-Mar-2018 11:37
Send private message

hio77:

 

get your own modem to bridge and stick the NF4V on the inside.

 

 

 

there are posts somewhere around here about extracting SIP logins etc, you could always go down that route.

 

The NF4V's are amazing bridging modems. i run a set of them here. Never misses a beat and broadcom chipset is wide open for polling and playing. 

 

 

 

 

@hio77 are you bridging ADSL2 or VDSL?





Generally known online as OpenMedia, now working for Red Hat New Zealand as a Solution Architect for all things Linux, Virtual and of course Cloud. Still playing with MythTV and digital media on the side.

'That VDSL Cat'
8446 posts

Uber Geek
+1 received by user: 1816

Trusted
Spark
Subscriber

  Reply # 1971130 8-Mar-2018 11:39
Send private message

openmedia:

 

 

 

hio77 are you bridging ADSL2 or VDSL?

 

 

 

 

Both.

 

 

 

terminate DHCP and PPPoE respectively per RSP support for platforms.

 

 

 

They don't do PPPoA to PPPoE translation, so you need a RSP that supports atm 0.110 for adsl.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


2009 posts

Uber Geek
+1 received by user: 161

Trusted

  Reply # 1971144 8-Mar-2018 12:06
Send private message

hio77:

 

openmedia:

 

 

 

hio77 are you bridging ADSL2 or VDSL?

 

 

 

 

Both.

 

 

 

terminate DHCP and PPPoE respectively per RSP support for platforms.

 

 

 

They don't do PPPoA to PPPoE translation, so you need a RSP that supports atm 0.110 for adsl.

 

 

 

 

@hio77 I'm with Orcon on Chorus UBA which appears to have ATM VPI.VCI 0.100

 

Also I'm guessing I need a router that will handle PPPoA on its end?

 

 





Generally known online as OpenMedia, now working for Red Hat New Zealand as a Solution Architect for all things Linux, Virtual and of course Cloud. Still playing with MythTV and digital media on the side.

'That VDSL Cat'
8446 posts

Uber Geek
+1 received by user: 1816

Trusted
Spark
Subscriber

  Reply # 1971146 8-Mar-2018 12:13
Send private message

openmedia:

 

@hio77 I'm with Orcon on Chorus UBA which appears to have ATM VPI.VCI 0.100

 

Also I'm guessing I need a router that will handle PPPoA on its end?

 

 

 

 

Last i checked Orcon (vocus) allow it, It simply isn't the supported setup.

 

 

 

You would need to change to 0.110 then VLAN10 and go PPPoE (possibly could even do DHCP with them).

 

 

 

@sounddude probably could confirm.

 

As stated, would likely be unsupported.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


I fix stuff!
1679 posts

Uber Geek
+1 received by user: 343

Trusted
Vocus
Subscriber

  Reply # 1971282 8-Mar-2018 15:21
Send private message

If you are on Chorus UBA (BUBA) then the router will need to do PPPoE->PPPoA conversion using VCI 0.100.

 

If you are Chorus EUBA then you can do PPPoE->PPPoE using VCI 0.110 (VLAN 10).

 

DHCP doesn't work on EUBA, only UFB.


2009 posts

Uber Geek
+1 received by user: 161

Trusted

  Reply # 1972189 10-Mar-2018 00:00
Send private message

Thanks to confirmation from @Sounddude that I'm on EUBA I was able to test running a PPPoE connection on an NF4V.

 

I then bridged that to my R7000 running advanced tomato





Generally known online as OpenMedia, now working for Red Hat New Zealand as a Solution Architect for all things Linux, Virtual and of course Cloud. Still playing with MythTV and digital media on the side.

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.