Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


#232096 29-Mar-2018 17:25
Send private message

I am trying to get ICMP (ping) working on Voyager using my BYO Skinny HG659 router.

 

I want to get ping working to set up Hurricane Electric IPv6 tunnelling through IPv4.

 

I have set up the router security ACL to include ICMP-LAN and ICMP-WAN (without using any IP addresses).
I have rebooted my router.

 

I have used my mobile phone to try and ping my IP.
I have also used MX-Toolbox web site to also try and ping my IP.

 

Using my phone and Mx-Toolbox I can ping to some external IPs nearby my IP.

 

I can use Window 10 CMD to ping my external IP and also various external IPs no problem.

 

I have a few snips on my router config but I thought I would try a shorter posting first.

 

Any help would be most appreciated.





Gordy

 

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
  #1985998 30-Mar-2018 14:38
Send private message

I dug out my old Spark HG630b and set it up for Voyager VDSL.

 

Set ACL to:

 

ICMP LAN to any any (no IP addresses).

 

and

 

ICMP WAN to any any (no IP addesses)

 

Didn't even re-boot the router and now I can ping my WAN IP.

 

Pleased.

 

Now to figure out what I need to do to enable ICMP in my HG659.

 

Maybe Skinny disabled ICMP in the HG659 router - firmware V100R001C297B011.

 

Onwards....

 

 





Gordy

 

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.


 
 
 

GoodSync. Easily back up and sync your files with GoodSync. Simple and secure file backup and synchronisation software will ensure that your files are never lost (affiliate link).
  #1986748 1-Apr-2018 12:28
Send private message

I have gone back to using my Skinny HG659 with Voyager... without ping working as yet. ACL - ICMP for Lan and Wan is setup.

 

I stopped using the HG630 which did have successful ping because I couldn't find any  IP protocol 41 option for IPv6 encapsulation.

 

I will continue to look for options. Maybe a more suitable modem/router is required.

 

 





Gordy

 

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.


michaelmurfy
meow
12481 posts

Uber Geek

Moderator
ID Verified
Trusted
Lifetime subscriber

  #1986769 1-Apr-2018 13:04
Send private message

You can ask Voyager for IPv6?





Michael Murphy | https://murfy.nz
Referral Links: Octopus Energy ($50 Credit) | Tesla | Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.




  #1986803 1-Apr-2018 14:54
Send private message

michaelmurfy:

 

You can ask Voyager for IPv6?

 

 

Have asked Voyager.... response was 'months away'...

 

I did find in a web search that Voyager has a bunch of IPv6 /32 recorded back in December 2017.





Gordy

 

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.


  #1986835 1-Apr-2018 16:03
Send private message




Gordy

 

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.


michaelmurfy
meow
12481 posts

Uber Geek

Moderator
ID Verified
Trusted
Lifetime subscriber

  #1986846 1-Apr-2018 16:41
Send private message

That is what I thought. I wouldn't suggest setting up a he.net tunnel (it is quite high latency).

 

If you need IPv6 for anything then maybe setting up a vultr.com VM would be better for you.





Michael Murphy | https://murfy.nz
Referral Links: Octopus Energy ($50 Credit) | Tesla | Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.


  #1986852 1-Apr-2018 17:04
Send private message

michaelmurfy:

 

That is what I thought. I wouldn't suggest setting up a he.net tunnel (it is quite high latency).

 

If you need IPv6 for anything then maybe setting up a vultr.com VM would be better for you.

 

 

Thanks for the link...

 

I don't really need IPv6.... I want to learn about IPv6 and perhaps work through the HE IPv6 certification.

 

HE appears to require you to have IPv6 to be able to work through the certification.

 

 





Gordy

 

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.




michaelmurfy
meow
12481 posts

Uber Geek

Moderator
ID Verified
Trusted
Lifetime subscriber

  #1986870 1-Apr-2018 17:57
Send private message

You don't need IPv6 locally on your network - a VM with IPv6 will work well (Vultr $5 plan). You can create a SSH tunnel if you want it locally that way. Much easier than setting up a tunnel on your home network as tunnels are incredibly slow.

 

Trust me, I know :)

 

IPv6 Certification Badge for agentb





Michael Murphy | https://murfy.nz
Referral Links: Octopus Energy ($50 Credit) | Tesla | Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.


VygrNetworkMonkey
159 posts

Master Geek

Trusted
Voyager
Lifetime subscriber

  #1987349 2-Apr-2018 22:27
Send private message

Hi Gordy7, 

 

We can provide an IPv6 service if you like - comprised of a /64 linknet, and a /56 routed subnet (common industry standard).
It's not something we currently offer publicly (Geekzone forums aside I guess :P ), but can be arranged on a case-by-case basis.

 

We have a full dual-stack core, so its the real deal.....SLAAC/RA, DHCPv6 and of course Static supported, so it'll just come down to if your router supports it.

 

Contact me via Private message, and I'll explain the details etc :)

 

 





Voyager Internet - Network Monkey

  #1987463 3-Apr-2018 10:16
Send private message

VygrNetworkMonkey:

 

Hi Gordy7, 

 

We can provide an IPv6 service if you like - comprised of a /64 linknet, and a /56 routed subnet (common industry standard).
It's not something we currently offer publicly (Geekzone forums aside I guess :P ), but can be arranged on a case-by-case basis.

 

We have a full dual-stack core, so its the real deal.....SLAAC/RA, DHCPv6 and of course Static supported, so it'll just come down to if your router supports it.

 

Contact me via Private message, and I'll explain the details etc :)

 

 

 

 

Most appreciated... PM sent. :-)

 

 





Gordy

 

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.


hio77
'That VDSL Cat'
12989 posts

Uber Geek

ID Verified
Trusted
Voyager
Subscriber

  #1987465 3-Apr-2018 10:20
Send private message

VygrNetworkMonkey:

 

We have a full dual-stack core, so its the real deal.....SLAAC/RA, DHCPv6 and of course Static supported, so it'll just come down to if your router supports it.

 

 

That's quite a range.

 

 

 

Any reason to build out the network on all the options rather than go with defacto default, DHCPv6 or nothing?





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

 

 


  #1987473 3-Apr-2018 10:28
Send private message

Not exactly sure what the IPv6 offering is... seems huge...

 

I will quite  comfortably map my stuff into the lower 256 addresses of my IPv6 address range.

 

 





Gordy

 

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.


michaelmurfy
meow
12481 posts

Uber Geek

Moderator
ID Verified
Trusted
Lifetime subscriber

  #1987514 3-Apr-2018 11:07
Send private message

hio77:

 

Any reason to build out the network on all the options rather than go with defacto default, DHCPv6 or nothing?

 

2degrees are the same. It is basically the standard to support all the things for the ultimate in router support. If the core routers support it then why the hell not is the simple answer to your question ;)





Michael Murphy | https://murfy.nz
Referral Links: Octopus Energy ($50 Credit) | Tesla | Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.


  #1987528 3-Apr-2018 11:23
Send private message

michaelmurfy:

 

If you need IPv6 for anything then maybe setting up a vultr.com VM would be better for you.

 

 

Got myself set up with vultr.com. Was really easy and with good docs. Used Ubuntu with GUI and have started looking at LAMP tools to set up a web server.

 

I have not come across virtual computers before. I did look at other offerings, but vultr seemed the best value. By selecting a few Twitter links I got plenty of credit to get me going. Thanks :-)

 

 





Gordy

 

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.


VygrNetworkMonkey
159 posts

Master Geek

Trusted
Voyager
Lifetime subscriber

  #1987540 3-Apr-2018 11:43
Send private message

michaelmurfy:

 

hio77:

 

Any reason to build out the network on all the options rather than go with defacto default, DHCPv6 or nothing?

 

2degrees are the same. It is basically the standard to support all the things for the ultimate in router support. If the core routers support it then why the hell not is the simple answer to your question ;)

 

 

 

 

Pretty much - why wouldn't we?

 

It's only a couple of additional lines of config to support each protocol ... it makes no difference to our core, but a world of difference to our customers in that we can support all the options.





Voyager Internet - Network Monkey

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic





News and reviews »

Synology Introduces BeeStation
Posted 23-Feb-2024 14:14


New One UI 6.1 Update Brings Galaxy AI to More Galaxy Devices
Posted 23-Feb-2024 10:50


Amazon Echo Hub Available in New Zealand
Posted 23-Feb-2024 10:40


InternetNZ Releases Internet Insights 2023
Posted 20-Feb-2024 10:31


Seagate Adds 24TB IronWolf Pro Hard Drives for Multi-user Commercial and Enterprise RAID Storage Solutions
Posted 19-Feb-2024 16:54


Seagate Skyhawk AI 24TB Elevates Edge Security Capacity and Performance
Posted 9-Feb-2024 17:18


GoPro Releases Quik Desktop App for macOS and Introduces Premium+ Subscription Tier
Posted 9-Feb-2024 17:14


Ring Introduces New Ring Battery Video Doorbell Pro
Posted 9-Feb-2024 16:51


Galaxy AI Transforms the new Galaxy S24 Series
Posted 18-Jan-2024 07:00


D-Link launches AI-Powered Aquila Pro M30 Wi-Fi 6 Mesh Systems
Posted 17-Jan-2024 20:02


Newest LG 4K Lifestyle Projector Doubles as Art Objet
Posted 9-Jan-2024 15:50


More LG Smart TV Owners Set To Enjoy the Latest webOS Upgrade
Posted 9-Jan-2024 15:45


Panasonic Announces the Z95A and Z93A With Fire TV Built In
Posted 9-Jan-2024 15:30


Amazon Echo Pop Review
Posted 8-Jan-2024 14:22


Samsung Tab S9 FE Review
Posted 17-Dec-2023 08:26









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.







GoodSync is the easiest file sync and backup for Windows and Mac