Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.
View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3
6316 posts

Uber Geek
+1 received by user: 296

Trusted
Subscriber

  Reply # 2015159 13-May-2018 14:58
Send private message

Hi, there are reports they get quite warm, clearly this has not been an issue ?

 

Cyril


5123 posts

Uber Geek
+1 received by user: 1648


  Reply # 2015160 13-May-2018 15:00
Send private message

IcI:

 

cyril7: ... on the ... interface simply tag v10 and PPPoE or whatever your ISP requires. ...

 

That's what we did and plugged the the other end straight into the ONT. Five months connection. No issues.

 

 

I hope not - VDSL to ONT isn't going to work.


5123 posts

Uber Geek
+1 received by user: 1648


  Reply # 2015161 13-May-2018 15:01
Send private message

No way of config for modem parameters then? VPI/VCI etc?


6316 posts

Uber Geek
+1 received by user: 296

Trusted
Subscriber

  Reply # 2015169 13-May-2018 15:03
Send private message

I believe the eeprom on the SFP SPI port is use to configured this, still hunting out details

 

Cyril




Linux Systems Admin
919 posts

Ultimate Geek
+1 received by user: 149

Trusted
Integrity Tech Solutions
Subscriber

  Reply # 2015171 13-May-2018 15:05
One person supports this post
Send private message

IcI:

 

cyril7: ... on the ... interface simply tag v10 and PPPoE or whatever your ISP requires. ...

 

That's what we did and plugged the the other end straight into the ONT. Five months connection. No issues.

 

 

In the context of my post, it's about VDSL.

 

I will probably buy one of these VDSL SFP's, plug it into my switch, vlan it to my Cisco 887VA router and report back what I find.


3594 posts

Uber Geek
+1 received by user: 1322

Subscriber

  Reply # 2015224 13-May-2018 16:24
Send private message

Ooo keen to see how that module goes. Saw it pop up on Campbell's website, same price as a DV130 but so much tidier!

The CCR range rocks! Quite good fun trying to overwork them haha.

27073 posts

Uber Geek
+1 received by user: 6515

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 2015229 13-May-2018 16:32
Send private message

cyril7:

 

Hi, there are reports they get quite warm, clearly this has not been an issue ?

 

Cyril

 

 

Warm is an understatement. They get very warm, but that doesn't seem to be an issue.

 

 


6316 posts

Uber Geek
+1 received by user: 296

Trusted
Subscriber

  Reply # 2015232 13-May-2018 16:41
One person supports this post
Send private message

Hi Steve, so sounds like you have had a closeup with one of these, anything to report, other than temperature

 

Cyril


'That VDSL Cat'
8716 posts

Uber Geek
+1 received by user: 1890

Trusted
Spark
Subscriber

  Reply # 2015292 13-May-2018 18:21
Send private message

RunningMan:

No way of config for modem parameters then? VPI/VCI etc?


Looks to me like they don't do atm.



Their support for failover to adsl would have to be 110/0




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.




Linux Systems Admin
919 posts

Ultimate Geek
+1 received by user: 149

Trusted
Integrity Tech Solutions
Subscriber

  Reply # 2015294 13-May-2018 18:23
Send private message

hio77:
RunningMan:

 

No way of config for modem parameters then? VPI/VCI etc?

 


Looks to me like they don't do atm.

 

ATM is obsolete technology anyway. AFAIK ADSL connections in New Zealand now use PPPoE, though it's been several years since I last had ADSL so don't hold me to this.


'That VDSL Cat'
8716 posts

Uber Geek
+1 received by user: 1890

Trusted
Spark
Subscriber

  Reply # 2015297 13-May-2018 18:26
Send private message

MichaelNZ:

hio77:
RunningMan:


No way of config for modem parameters then? VPI/VCI etc?



Looks to me like they don't do atm.


ATM is obsolete technology anyway. AFAIK ADSL connections in New Zealand now use PPPoE, though it's been several years since I last had ADSL so don't hold me to this.



I cant think of any provider that supports ptm over adsl.
Many do allow it however.

Some (spark for example) are atm only for adsl.
There is a bit of reworking required for this functionality within the core and interconnects.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.




Linux Systems Admin
919 posts

Ultimate Geek
+1 received by user: 149

Trusted
Integrity Tech Solutions
Subscriber

  Reply # 2017805 17-May-2018 17:59
Send private message

I have now purchased some Mikrotik stuff and wish to try it out as soon as it arrives (expected tomorrow). I will be using the Metanoia V5311 SFP VDSL modem.

 

Does someone have a VDSL config for me please?


'That VDSL Cat'
8716 posts

Uber Geek
+1 received by user: 1890

Trusted
Spark
Subscriber

  Reply # 2017812 17-May-2018 18:09
One person supports this post
Send private message

MichaelNZ:

 

I have now purchased some Mikrotik stuff and wish to try it out as soon as it arrives (expected tomorrow). I will be using the Metanoia V5311 SFP VDSL modem.

 

Does someone have a VDSL config for me please?

 

 

Config will be vlan 10 on interface, PPPoE/IPoE session on that interface as WAN.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


6316 posts

Uber Geek
+1 received by user: 296

Trusted
Subscriber

  Reply # 2017815 17-May-2018 18:12
Send private message

Hi as far as the 5311 goes just plug it in. From what I have read it will not auto negotiate so you need to fix the port on 1gig duplex.



As for the rest create a vlan 10 and attach it to the wan port, then create a pppoe client and attach it to vlan10.



In the firewall under Nat change the outbound interface to the pppoe instance, should all work, obviously you will need to ensure the pppoe client has credentials etc.



Cyril

27073 posts

Uber Geek
+1 received by user: 6515

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 2017861 17-May-2018 19:09
One person supports this post
Send private message

And most importantly remember to firewall off the PPPoE client. If you don't you'll be own3d within hours by a DNS amplification attack.

 

 


1 | 2 | 3
View this topic in a long page with up to 500 replies per page Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.