Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




14877 posts

Uber Geek
+1 received by user: 2017


# 245055 16-Jan-2019 14:57
Send private message quote this post

My parents are getting a new star network installed in their new house. It has a lot of ethernet cabling to future proof it. This is what the electrician has done so far. I am wondering though whether they have used the wrong components to connect the Ethernet cables to. It looks like they have used these Hills Home Hub HTM-408S Telephone Modules to connect the ethernet cables to  https://www.hills.co.nz/p/S2120#gref, so their aren't many outputs. Shouldn't they be using something like this https://www.ryve.com.au/shop/categories/network-wifi/hills-hdm-808-data-patch-module/ so there is a connector for each wire? The box also does seem quite small for what is going in it and we did comment to the electrician that it looked too small . The box contains the ONT and the main spark modem/router

 

 

 


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2 | 3 | 4 | 5 | 6 | 7
5442 posts

Uber Geek
+1 received by user: 2516

Trusted
Lifetime subscriber

  # 2162033 16-Jan-2019 15:01
8 people support this post
Send private message quote this post

NOOOOO! That looks like a massive voice patch panel :(

 

 





Chorus has spent $1.4 billion on making their xDSL broadband network faster and even more now as they are upgrading their rural Conklins. If your still stuck on ADSL or VDSL, why not spend $195 on a master filter install to make sure you are getting the most out of your connection?
I install - Naked DSL, DSL Master Splitters, VoIP, data cabling and general computer support for home and small business.
Rural Broadband RBI installer for Ultimate Broadband and Full Flavour

 

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com


6615 posts

Uber Geek
+1 received by user: 2293
Inactive user


  # 2162034 16-Jan-2019 15:02
Send private message quote this post

Hmm....
You want Patch Panels.
http://www.dynamix.co.nz/PP10-C6-12 

 

I am guessing the sparkie is an older guy.. When i was one, Saw this a lot and had to rip out telephone style wiring for data etc.



 
 
 
 




14877 posts

Uber Geek
+1 received by user: 2017


  # 2162035 16-Jan-2019 15:04
Send private message quote this post

Thanks, that is what I thought too based on the module information. Do you know what they should be using?


5442 posts

Uber Geek
+1 received by user: 1895


  # 2162037 16-Jan-2019 15:06
9 people support this post
Send private message quote this post

Couldn't get much more wrong if you tried. On top of what @coffeebaron says the outer insulation on that cable should only stripped back 20mm or so, and the twist maintained as well. Hopefully there's enough length left so that when they have to cut a couple of feet off each cable, there's enough left to terminate it properly.

 

Whoever is doing that has no idea whatsoever about data cabling. Get them to stop before they wreck it for someone who does know what to do.




14877 posts

Uber Geek
+1 received by user: 2017


  # 2162038 16-Jan-2019 15:06
One person supports this post
Send private message quote this post

Coil:

 

Hmm....
You want Patch Panels.
http://www.dynamix.co.nz/PP10-C6-12 

 

I am guessing the sparkie is an older guy.. When i was one, Saw this a lot and had to rip out telephone style wiring for data etc.


 

 

 

 

He is reasonably young.I guess at least it was picked up early and it can be fixed.


Banana?
4740 posts

Uber Geek
+1 received by user: 1232

Subscriber

  # 2162039 16-Jan-2019 15:06
3 people support this post
Send private message quote this post

Oh dear.

 


Those look like HDM-408 - phone modules. Used to send one phone line (or more) to different rooms.

 

What they want (if they must use Hills gear) is HDM-808 https://www.hills.co.nz/p/S2119#gref

 

They would at least fit into that cabinet.


5442 posts

Uber Geek
+1 received by user: 1895


  # 2162040 16-Jan-2019 15:09
9 people support this post
Send private message quote this post

On the plus side, you'll be able to plug in 40 odd POTS phones at once on the same line...


 
 
 
 


6615 posts

Uber Geek
+1 received by user: 2293
Inactive user


  # 2162042 16-Jan-2019 15:14
Send private message quote this post

mattwnz:

 

Thanks, that is what I thought too based on the module information. Do you know what they should be using?

 

 

 

 

What I linked would be ideal. Wrong cabinet type etc..  But I also wonder about that cable management, Not sure if that cabinet swings off the wall but that is a lot of excess, un-shielded cable. I'd go and grab a dynamix wall mounted cabinet and put it in the place of that if possible. 

Cheers


6615 posts

Uber Geek
+1 received by user: 2293
Inactive user


  # 2162043 16-Jan-2019 15:17
Send private message quote this post

trig42:

 

Oh dear.

 


Those look like HDM-408 - phone modules. Used to send one phone line (or more) to different rooms.

 

What they want (if they must use Hills gear) is HDM-808 https://www.hills.co.nz/p/S2119#gref

 

They would at least fit into that cabinet.

 

 

 

 

I'll pay people to avoid Hills. 


6679 posts

Uber Geek
+1 received by user: 547

Trusted
Subscriber

  # 2162044 16-Jan-2019 15:22
5 people support this post
Send private message quote this post

Who ever did this should be TOLD to step away from the job and keep his invoice to himself.

 

Why are there dedicated phone circuits (in blue) all circuits should be standard structured cabling and terminate on full four pair RJ45 (as the grey ones are). 

 

As for the unsheathing, well thats just crazy, but that said it probably would not have a major impact on performance, but its NOT how its done.

 

Luckly there appears to be sufficient slack that ALL cables can be re terminated correctly. Ideally all on RJ45 modules (like the left side).

 

Edit, just realised they are all voice modules, no no no there should be no voice modules or at the minimum one voice module only used as a voice source distributor, but all room outlets should be on standard 4pair RJ45 modules and all room outlets terminated the same.!!

 

Cyril




14877 posts

Uber Geek
+1 received by user: 2017


  # 2162047 16-Jan-2019 15:34
Send private message quote this post

Thanks, glad I checked.


830 posts

Ultimate Geek
+1 received by user: 103

Trusted

  # 2162048 16-Jan-2019 15:37
One person supports this post
Send private message quote this post

Bizarre!
Why strip it so far back, you run the risk of damaging / nicking a strand , then have to peel it even further back.
Never seen anything like it.

6679 posts

Uber Geek
+1 received by user: 547

Trusted
Subscriber

  # 2162051 16-Jan-2019 15:40
One person supports this post
Send private message quote this post

And its all to distribute 4 phones circuits around the house to each outlet, ??????????????????????????????????????????????????????????

 

Cyril


6615 posts

Uber Geek
+1 received by user: 2293
Inactive user


  # 2162052 16-Jan-2019 15:43
Send private message quote this post

cyril7:

 

And its all to distribute 4 phones circuits around the house to each outlet, ??????????????????????????????????????????????????????????

 

Cyril

 

 

The circle will fit through square, doesn't mean it goes there! 

 




14877 posts

Uber Geek
+1 received by user: 2017


  # 2162166 16-Jan-2019 18:10
Send private message quote this post

Just  a quick question. Can they use  these Gigabit switches in the HDP, stacked on top of the other, to directly plug all the Ethernet cables coming into the cabinet.  ? https://www.pbtech.co.nz/product/SWHNGR1160/NETGEAR-ProSAFE-GS116-16-port-Gigabit-Switch-16x-G Or are these incoming cables  supposed to be connected to a patch panel first, so both would be needed? It sounds like they have been working on it today after they picked up the problem,  and all the cables have now been terminated to plugs, and plugged into 3 x 16 port Netgear gigabit switches stacked on top of the other.


 1 | 2 | 3 | 4 | 5 | 6 | 7
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Air New Zealand uses drones to inspect aircraft
Posted 17-Jun-2019 15:39


TCL Electronics launches its first-ever 8K TV
Posted 17-Jun-2019 15:18


E-scooter share scheme launches in Wellington
Posted 17-Jun-2019 12:34


Anyone can broadcast with Kordia Pop Up TV
Posted 13-Jun-2019 10:51


Volvo and Uber present production vehicle ready for self-driving
Posted 13-Jun-2019 10:47


100,000 customers connected to fibre broadband network through Enable
Posted 13-Jun-2019 10:35


5G uptake even faster than expected
Posted 12-Jun-2019 10:01


Xbox showcases 60 anticipated games
Posted 10-Jun-2019 20:24


Trend Micro Turns Public Hotspots into Secure Networks with WiFi Protection for Mobile Devices
Posted 5-Jun-2019 13:24


Bold UK spinoff for beauty software company Flossie
Posted 2-Jun-2019 14:10


Amazon Introduces Echo Show 5
Posted 1-Jun-2019 15:32


Epson launches new 4K Pro-UHD projector technology
Posted 1-Jun-2019 15:26


Lenovo and Qualcomm unveil first 5G PC called Project Limitless
Posted 28-May-2019 20:23


Intel introduces new 10th Gen Intel Core Processors and Project Athena
Posted 28-May-2019 19:28


Orcon first to trial residential 10Gbps broadband
Posted 28-May-2019 11:20



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.