Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




29 posts

Geek


Topic # 52573 4-Dec-2009 20:52
Send private message

Hi geeks,

this is my first post, even though I've been lurking for about 6 months. (I'll qualify that - this is my second post, after I posted more than once on my first post due to being taken to a blank screen when clicking "Create Topic" - rather, it created confusion.)

In recent months I set up a Linksys WRT54GL wireless router to my D-Link DSL-502T modem (probably not the best modems, but it came with a 3 year warranty which was tempting after having 2 modems fail in 2 years).

I have used uTorrent in the past, and managed port forwarding without too much effort. This time, with the wireless router, the icon at the bottom of the uTorrent screen remains red.

Networking is not one of my strong suits, and I am having problems port forwarding with a discrete router in the mix. I think I have set up the router okay, but I cannot work out what to do to the modem, nor where to enter it.

Can someone please run through this with me? Any help will be greatly appreciated! Thanks!

Create new topic
1742 posts

Uber Geek
+1 received by user: 240

Subscriber

  Reply # 279447 4-Dec-2009 22:26
Send private message

Advanced/port forwarding. Rule points to WAN interface (give it a static address) of router. ?Tools?/System/Save and Reboot.




Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test




29 posts

Geek


  Reply # 280090 7-Dec-2009 19:02
Send private message

Thanks, Mr Spyware, for your reply. However there is no "Port Forwarding" tab anywhere in the menu. Any other pointers?
Thanks!

 
 
 
 


1742 posts

Uber Geek
+1 received by user: 240

Subscriber

  Reply # 280098 7-Dec-2009 19:17
Send private message

falcott: Thanks, Mr Spyware, for your reply. However there is no "Port Forwarding" tab anywhere in the menu. Any other pointers?
Thanks!

Advanced/Virtual Server maybe? I don't have a manual but maybe you should.




Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test




29 posts

Geek


  Reply # 280170 7-Dec-2009 21:59
Send private message

Yes, that looks like it. But in your previous reply, do you mean LAN rather than WAN? (There's no reference to WAN on the Virtual Server page anyway.)

Should LAN IP be the Default Gateway? Or do I need to set up a static IP address in the router?

Thanks for your help!

1742 posts

Uber Geek
+1 received by user: 240

Subscriber

  Reply # 280180 7-Dec-2009 22:25
Send private message

falcott: Yes, that looks like it. But in your previous reply, do you mean LAN rather than WAN? (There's no reference to WAN on the Virtual Server page anyway.)

Should LAN IP be the Default Gateway? Or do I need to set up a static IP address in the router?

Thanks for your help!


The WAN interface on Linksys needs a static IP (on same subnet as 502T LAN interface). The LAN interface of the 502T connects to WAN interface of Linksys. Port forward rule on 502T points to this WAN interface IP address.

To summarise. Port forward rule on 502T points to WAN interface IP address on Linksys and port forward rule on Linksys points to PC IP address (running uTorrent).  So both the PC and Linksys WAN interface need static addresses.

P.S. All above assumes that you have connected the 502T to WAN interface of the linksys, and hence your port forward rule in the Linksys, but maybe you connected the 502T to the Linksys LAN interface in which case you don't need any port forward rule in the Linksys as it is not doing any routing. Also the above port forward would have to be modified.




Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test




29 posts

Geek


Reply # 284694 22-Dec-2009 19:55
Send private message

Thanks for your reply. Sorry I have been a bit slack (or perhaps too busy) to sort out the problem and to say thanks. So, thanks Smile

8019 posts

Uber Geek
+1 received by user: 384

Trusted
Subscriber

  Reply # 284866 23-Dec-2009 16:55
Send private message

Doesn't the 502T support half bridge? If so just enable half bridging (might be called IP extension), then set the WRT to get it's WAN ip address automagically from the 502T.

After that you will only have to do the port forwarding in the WRT to your PC's ip address.


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel unveils the 8th Gen Intel Core Processor family for desktop
Posted 25-Sep-2017 19:45


Chow brothers plan to invest NZ$100 million in technology
Posted 24-Sep-2017 16:24


Symantec protects data everywhere with Information Centric Security
Posted 21-Sep-2017 15:33


FUJIFILM introduces X-E3 mirrorless camera with wireless connectivity
Posted 18-Sep-2017 13:53


Vodafone announces new plans with bigger data bundles
Posted 15-Sep-2017 10:51


Skinny launches phone with support for te reo Maori
Posted 14-Sep-2017 08:39


If Vodafone dropping mail worries you, you’re doing online wrong
Posted 11-Sep-2017 13:54


Vodafone New Zealand deploy live 400 gigabit system
Posted 11-Sep-2017 11:07


OPPO camera phones now available at PB Tech
Posted 11-Sep-2017 09:56


Norton Wi-Fi Privacy — Easy, flawed VPN
Posted 11-Sep-2017 09:48


Lenovo reveals new ThinkPad A Series
Posted 8-Sep-2017 14:37


Huawei passes Apple for the first time to capture the second spot globally
Posted 8-Sep-2017 10:45


Vodafone initiative enhances te reo Maori pronunciation on Google Maps
Posted 8-Sep-2017 10:40


Voyager Internet expand local internet phone services company with Conversant acquisition
Posted 6-Sep-2017 18:27


NOW Expands in to Tauranga
Posted 5-Sep-2017 18:16



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.