Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


40 posts

Geek


Topic # 58551 14-Mar-2010 13:05
Send private message

Hi all,

My Linksys WAG54Gv3 got blasted in a recent thunderstorm, and after limping along for a while, has now finally gone to the big bit bucket in the sky. I've had to dig out an old D-Link 502T to get me back on line until I figure out what I'll replace it with (suggestions here would be very welcome. I'm looking for anything that can better the WAG54Gv3 performance, which has been pretty rock solid on the DSL front, maybe not so good on the wireless, but I'll probably split the wireless away as a seprate box next time. VoIP FXS/FXO line capability might also get added to the wish list).

The interesting thing I've noticed is that, although the modem has come up in ADSL2+ multimode, I cannot get it to run a faster linerate than 7.5Mbps down/900K up. Some might think that's okay, but my Linksys connected at 11Mbps down/ 900K up on exactly the same connection (no suggestions about filters and all that, please. I'm using a central splitter).

For the record, the modem is reporting
                  Down      Up
SNR                15      12  dB
Atten              28      15 dB
Data rate     7547      901 kbps

(The old Linksys I believe (can't check anymore) had an SNR of 12/12 dB down/up.)

I've had a look around to see whether I have the latest firmware on the 502T, and currently have installed 

ADSL Firmware version is 5.00.04.00 - 5.00.03.00 - 5.00.03.00 Annex A - 01.07.2b - 0.52
ADSL Software Version V3.00B02NZ.20060710

which (from the date), looks quite old? But I can't see anything NZ-specific that's newer. Hardware-wise, its not a gen II, its a ver. A5, but I believe these are supposed to be capable of ADSL2+ speeds (unless anyone knows better?).

(Note: The 502T status page reports both ADSL Firmware and ADSL Software versions? The Firmware version didn't change when I upgraded, only the Software version. Is it separately upgradeable?)

So, my question is, does anyone have an explanation as to why I can't get the same higher line sync rate I was getting on the linksys? I'm on a FS/FS plan with Orcon, and they couldn't explain it. Is there a later software or firmware version I can load? Or is it something else? TIA





Create new topic
8025 posts

Uber Geek
+1 received by user: 387

Trusted
Subscriber

  Reply # 307118 14-Mar-2010 17:14
Send private message

Different hardware, the Linksys uses a Texas instruments chipset for the modem and the D Link uses a GlobalSpan (I think, the Gen I does anyway). The gen I version of the 502T is very old and does not support ADSL2+ sync speeds.

I'd recommend you switch to a proven broadcom chipset modem/router/wireless ap like the Dynalink RTA1025W (~$120).

http://www.gearbot.co.nz/store_products/search/dynalink%201025/



1984 posts

Uber Geek
+1 received by user: 133

Trusted

  Reply # 307817 16-Mar-2010 14:05
Send private message

Some of the DLinks had compatibility issues with ADSL2+, but its fallen back to ADSL so thats good. You could set the modem to ADSL2 or ADSL2+ and see if it synchronises, but you have noise margin to spare so I dont think your splitter was damaged by the lightning strike at all.

Maybe put your flash new router onto a UPS to protect against future surge/spikes though, you dont want the next power fluctuation/cut to take out your VoIP along with internet. And keep in mind that you will have double NAT issues if you go for a separate wifi router next time.




Qualified in business, certified in fibre, stuck in copper, have to keep going  ^_^

977 posts

Ultimate Geek
+1 received by user: 91


  Reply # 307835 16-Mar-2010 14:51
Send private message

there is a know problem with the dlink 502 and 504 routers that limit the adsl 2 speed to 7.5MB.
Telecom did develop a firmware update that fixed the problem but then switched to Thomsom for their modems and refused to release the firmware update.

Apparently firmware updates from the DLINK website do not fix the problem for NZ



40 posts

Geek


  Reply # 308954 18-Mar-2010 22:47
Send private message

Thanks for the responses.
Of course, my last router was on a UPS, along with my Disk Station, but ironically the UPS dying (battery finally gave up the ghost) could have been what helped to take it down!? Not sure which came first, the lightning damage or the UPS battery dying. Probably the UPS was already flaky and the lightning/power surge finally toasted it, causing low volts on the UPS output,  stressing the load hanging off it.

I'm not much of a fan for Dynalink, I'm afraid. Am looking at an Asus DSL-N11 or N13. I believe (but can anyone confirm if?) these have a Broadcom chipset. I keep hearing Billion 7800N's are quite good, but perhaps a bit pricier than I want/need.

Other candidates for DSL and/or Wireless devices are:-

ASUS RT-N16
UBNT Rocket M2
Draytek Vigor 120
TPLink TD8840

Bit of a mixed bag I guess, but am trying to keep an open mind at the moment.
Any other suggestions are welcome, but I guess I'm now getting a bit OT, so I should bring things back to the DSL-502T.

The implication from the responses is that a new firmware could have made the line rate quicker, even with this generation of hardware?That would match with what I've read on overseas forums. So, given the TNZ developed code is not available, how differently would the DSL-502T behave in the TNZ network if flashed with an Australian variant of the code?

8025 posts

Uber Geek
+1 received by user: 387

Trusted
Subscriber

  Reply # 308977 19-Mar-2010 00:35
Send private message

I think you might aswell try the AU firmware, just remember to change the settings to the NZ ones (PPPoA, VPI 0, VCI 100 etc) not much to lose.. if it doesn't work you're going to get a new modem that fully supports ADSL2+ anyway.

Few questions:

1: How much do you want to spend ideally?
2: Do you want an all in one unit or is a separate modem and router solution fine?
3: Do you want wireless N?
4: Do you want Gigabit lan?





Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Microsoft Dynamics 365 Business Central launches
Posted 10-Jul-2018 10:40


Spark completes first milestone in voice platform upgrade
Posted 10-Jul-2018 09:36


Microsoft ices heated developers
Posted 6-Jul-2018 20:16


PB Technologies charged for its extended warranties and warned for bait advertising
Posted 3-Jul-2018 15:45


Almost 20,000 people claim credits from Spark
Posted 29-Jun-2018 10:40


Cove sells NZ's first insurance policy via chatbot
Posted 25-Jun-2018 10:04


N4L helping TAKA Trust bridge the digital divide for Lower Hutt students
Posted 18-Jun-2018 13:08


Winners Announced for 2018 CIO Awards
Posted 18-Jun-2018 13:03


Logitech Rally sets new standard for USB-connected video conference cameras
Posted 18-Jun-2018 09:27


Russell Stanners steps down as Vodafone NZ CEO
Posted 12-Jun-2018 09:13


Intergen recognised as 2018 Microsoft Country Partner of the Year for New Zealand
Posted 12-Jun-2018 08:00


Finalists Announced For Microsoft NZ Partner Awards
Posted 6-Jun-2018 15:12


Vocus Group and Vodafone announce joint venture to accelerate fibre innovation
Posted 5-Jun-2018 10:52


Kogan.com to launch Kogan Mobile in New Zealand
Posted 4-Jun-2018 14:34


Enable doubles fibre broadband speeds for its most popular wholesale service in Christchurch
Posted 2-Jun-2018 20:07



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.