Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




4 posts

Wannabe Geek


Topic # 6322 16-Jan-2006 05:35
Send private message

I am new to this, but see that I am not the only one to have problems.

I have read, as far as in me lies, all the guides that have been posted here. I acknowledge that I might have missed something, and would be really glad of some help.

I have a desktop PC that is on a wired network from a router. The router's IP is 192.168.2.1 and it is the DHCP server for the network. The PC's NIC obtains its IP from the router, and is allocated 192.168.2.2.

I have a BT dongle that identifies itself as a Silicon Wave BT device. It came with Blue Soleil software, but I have ditched that in favour of Widcomm drivers version 1.4.2.10.

My PDA is a PalmOne Tungsten T5, and I have established a pairing connection with the PC that enables me to HotSync etc.

However, whatever I seem to try does not allow me to get Internet Access.

When I make the connection it does establish, but when I try a web address I get a "Cannot connect . . " message.

I have entered the DNS server address 192.168.2.1 in the BT adapter configuration - it is set to obtain an IP automatically.

I have set the LAN NIC in the PC to do internet sharing.

All to no avail. When I check the log on the PDA after connecting it reads as follows:-

LCP->CfgReq
LCP<-CfgRej
LCP->CfgReq
LCP<-CfgAck
LCP->CfgReq
LCP<-CfgAck
LCP Up
IPCP->CfgReq
IPCP<-CfgReq
IPCP->CfgAck
IPCP<-CfgRej
IPCP->CfgReq
IPCP->CfgReq
IPCP->CfgReq
IPCP<-CfgRej
IPCP->CfgReq
IPCP<-CfgAck
IPCP Up

Service Name: Bluetooth LAN
Local IP : 0.0.0.0
Gateway: 0.0.0.0
DNS:

Please can you suggest anything else to try before I become bald!!!!

Thanks very much.

Create new topic
BDFL - Memuneh
58923 posts

Uber Geek
+1 received by user: 10292

Administrator
Trusted
Geekzone
Subscriber

Reply # 26533 16-Jan-2006 07:37
Send private message

Welcome to Geekzone...

stevecarter: I have entered the DNS server address 192.168.2.1 in the BT adapter configuration - it is set to obtain an IP automatically.
The BT Adapter should always be 192.168.0.1 if you are using ICS. This is in all our guides.

Also, enter the DNS server address(es) on this BT adapter's configuration.

No script is needed on a T5 apparently.







4 posts

Wannabe Geek


Reply # 26538 16-Jan-2006 09:14
Send private message

Freitasam,

Thanks for your response.

I forgot to say that I did try putting the 192.168.0.1 IP address in the BT adapter, and the appropriate subnet and set the DNS server to 192.168.2.1.

None of this made any difference. The connection establishes, but the logfile still reads as before.

I do not have a firewall in place.

When the connection has established and I try to access and web site, I get the "Cannot Find Requested Page . . . . " message.

Where to now?

Thanks agian.

 
 
 
 




4 posts

Wannabe Geek


Reply # 26642 17-Jan-2006 23:54
Send private message

freitasm,

I apologise if I am being a pain, but I would love to get my BT access to the internet sorted out.

Is there anything you, or anyone else, can suggest to help me with this?

Thanks very much.

Peace and all good.

BDFL - Memuneh
58923 posts

Uber Geek
+1 received by user: 10292

Administrator
Trusted
Geekzone
Subscriber

Reply # 26643 18-Jan-2006 00:08
Send private message

Are you sure 192.168.2.1 is the correct DNS? It looks like your router. does it work as a DNS server? I recommend you use the ISP's DNS address instead.







4 posts

Wannabe Geek


Reply # 26651 18-Jan-2006 06:06
Send private message

freitasm

Thanks for your reply. I tried what you suggested, but still get the same "Cannot find requested page" message.

Let me tell you the complete configuration.

I have a wired router which has an IP address of 192.168.2.1

It is set to act as DHCP supplier for a small network, and issues the address 192.168.2.2 to the PC which I am using to make the BT connection.

The LAN NIC in the PC is set to obtain IP address and DNS server address automatically.

The BT LAN adapter in the PC has its IP address set to 192.168.0.1 as per the guide with subnet mask at 225.225.225.0 and the DNS server addresses set to those of my ISP - 82.128.229.70 and 82.128.229.72. No default gateway is set.

Should it be the LAN NIC that is set to do the ICS sharing? If so, that will mean the LAN NIC will have its IP address set to 192.168.0.1 rather than the BT LAN adapter. Will that mean that connectivity is lost with the router?

I am getting a bit lost here - sorry.

Hope you can make sense of what I have written, and look forward to hearing from you again.

Stephen Carter

BDFL - Memuneh
58923 posts

Uber Geek
+1 received by user: 10292

Administrator
Trusted
Geekzone
Subscriber

Reply # 26659 18-Jan-2006 08:12
Send private message

stevecarter: Should it be the LAN NIC that is set to do the ICS sharing? If so, that will mean the LAN NIC will have its IP address set to 192.168.0.1 rather than the BT LAN adapter. Will that mean that connectivity is lost with the router?
The ICS is done from the LAN NIC facing the network to the Bluetooth virtual adapter.

The NIC facing the network should retain the current configuration, and the special address is to be used on the Bluetooth adapter. You will right-click and enable the Connection Sharing on your LAN NIC. I think you have done this already.

The only things I can think of now are firewall related.





Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Vodafone TV — television in the cloud
Posted 17-Oct-2017 19:29


Nokia 8 review: Classy midrange pure Android phone
Posted 16-Oct-2017 07:27


Why carriers might want to embrace Commerce Commission study, MVNOs
Posted 13-Oct-2017 09:42


Fitbit launches Ionic, its health and fitness smartwatch
Posted 12-Oct-2017 15:52


Xero launches machine learning automation to improve coding accuracy for small businesses
Posted 12-Oct-2017 15:45


Bank of New Zealand uses Intel AI to detect financial crime
Posted 12-Oct-2017 15:39


Sony launches Xperia XZ1, a smartphone with real-time 3D capture
Posted 11-Oct-2017 10:26


Notes on Nokia’s phone comeback
Posted 10-Oct-2017 10:06


Air New Zealand begins Inflight Wi-Fi rollout
Posted 9-Oct-2017 20:16


The latest mobile phones in perspective
Posted 9-Oct-2017 18:34


Review: Acronis True Image 2018 — serious backup
Posted 8-Oct-2017 11:22


Lenovo launches ThinkPad Anniversary Edition 25
Posted 7-Oct-2017 23:16


Less fone, more tech as Vodafone gets brand make-over
Posted 6-Oct-2017 08:16


API Talent Achieves AWS MSP Partner Status
Posted 5-Oct-2017 21:20


Stellar Consulting Group now a Domo Partner
Posted 5-Oct-2017 21:03



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.