Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


2479 posts

Uber Geek
+1 received by user: 1139


Topic # 84755 7-Jun-2011 18:56
Send private message

I have a couple of units in one room that I want to connect to the network, and cabling isn't feasible.

Needs to be wireless N as I will be streaming video (have tested with a WiFi dongle and throughput is fine), and N300 not the crappy half-speed N150 some vendors seem to be pushing.

Selectable (2.4Ghz or 5.8Ghz) would be an advantage, as my modem-router does both, as does the WiFi dongle on the upstairs WD TV Live. Will allow me to separate web-surfing on the laptop (at 2.4Ghz) from video streaming. However, I don't want to spend a fortune, so could give way on this.

Does anyone have any recommendations, thoughts or experiences to share with routers that are:
-  affordable;
-  capable of running in bridge mode;
-  N300 capable; and
-  desirably, but not essentially, 5.8Ghz compatible?

Thanks

Create new topic
454 posts

Ultimate Geek
+1 received by user: 106

Lifetime subscriber

  Reply # 478771 7-Jun-2011 22:13
Send private message

My recommendation would be for you to pick up a router that can run dd-wrt and/or tomato open source software. Manufacturers seem to stop updating the software for their routers after a year or two, and on the whole they tend to be unreliable. In contrast, the open source software gets continuing updates and I've found it to be rock solid.

I'm personally running tomatousb [tomatousb.org] on Linksys e2000 and WRT320N routers, which are essentially the same and tick all your boxes. In the time I've had them, they have never crashed or needed rebooting. I think you can pick up an e2000 new for about $170, although that model is about to be discontinued.

3174 posts

Uber Geek
+1 received by user: 593

Trusted

  Reply # 480809 13-Jun-2011 23:26
Send private message

Just to be clear, bridging means wireless device to wireless device then the output is a lan cable.
So if you have a wireless only client device like a tv or printer without a network plug, it wont work unless you have a 3rd unit to act as another access point. 

Also wireless repeating wont work at the speeds you want as it usually more than halves the speed required, and i am not entirely sure on the status of N repeating. 

So if the end devices can be plugged into a network switch, then the switch can be plugged into a client bridge then you are good to go. 

I cant recomend any decent client bridge except maybe the D-link ones. Their AP's lately have a switch on the back where you can select AP or Client mode, and it just acts as a client bridge to the AP or router you program it for. I am not sure about the client option in the newer N series devices though their slightly older G series AP's were good for this mode.  

Edit: typically you will be looking for an Access point only device with client mode - NOT a router with built in access point.




Ray Taylor
Taylor Broadband (rural hawkes bay)
www.ruralkiwi.com

There is no place like localhost
For my general guide to extending your wireless network Click Here




Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

N4L helping TAKA Trust bridge the digital divide for Lower Hutt students
Posted 18-Jun-2018 13:08


Winners Announced for 2018 CIO Awards
Posted 18-Jun-2018 13:03


Logitech Rally sets new standard for USB-connected video conference cameras
Posted 18-Jun-2018 09:27


Russell Stanners steps down as Vodafone NZ CEO
Posted 12-Jun-2018 09:13


Intergen recognised as 2018 Microsoft Country Partner of the Year for New Zealand
Posted 12-Jun-2018 08:00


Finalists Announced For Microsoft NZ Partner Awards
Posted 6-Jun-2018 15:12


Vocus Group and Vodafone announce joint venture to accelerate fibre innovation
Posted 5-Jun-2018 10:52


Kogan.com to launch Kogan Mobile in New Zealand
Posted 4-Jun-2018 14:34


Enable doubles fibre broadband speeds for its most popular wholesale service in Christchurch
Posted 2-Jun-2018 20:07


All or Nothing: New Zealand All Blacks arrives on Amazon Prime Video
Posted 2-Jun-2018 16:21


Innovation Grant, High Tech Awards and new USA office for Kiwi tech company SwipedOn
Posted 1-Jun-2018 20:54


Commerce Commission warns Apple for misleading consumers about their rights
Posted 30-May-2018 13:15


IBM leads Call for Code to use cloud, data, AI, blockchain for natural disaster relief
Posted 25-May-2018 14:12


New FUJIFILM X-T100 aims to do better job than smartphones
Posted 24-May-2018 20:17


Stuff takes 100% ownership of Stuff Fibre
Posted 24-May-2018 19:41



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.