Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




1528 posts

Uber Geek

Trusted

Topic # 86213 3-Jul-2011 20:26
Send private message

It's been a long time since I setup an old fashioned network at home....

I have just moved into a new house and signed up to TelstraClear broadband....
It's all installed and works like a charm with the ethernet cable connected to a PC....but I want to setup wifi in my house....how do I configure that?

I currently own a D-Link DSL-G604T wireless ADSL Router....how can I use this to setup a wirless network?

I have tried pluggin the ethernet cable coming from the TelstraClear cable modem, directly into one of the LAN ports of the Router, and have inputted everything such as the static IP address, gateway, DNS...etc etc....but still have no internet connection?

My computer can connect to the wifi/wireless network just fine...but no internet connection.

I am assuming I do not have to plug the cable modem into the ADSL port on the Router as that is for an ADSL modem.

Any help much appreciated




HTPC: Silverstone LC16M | abit IP35 Pro | Intel Quad Q9400 2.5GHz | Corsair 520HX | Samsung SH-S203D DVD Writer | NVIDIA GeForce GT 240 512MB RAM | 2 x 750GB Western Digital Caviar GP HDD | 4GB DDR800 RAM | D-Link DWA-547 Rangebooster N 650 Desktop | Blackgold BGT3540 | Microsoft Remote Control & Remote Keyboard for Windows Media Center | Windows 7 64bit

Mobile: Nokia N97, Nokia N900, Samsung Galaxy S, HTC EVO 3D, iPhone 4S, Samsung Galaxy S III (current)

Create new topic
2615 posts

Uber Geek
+1 received by user: 204

Trusted

  Reply # 488910 3-Jul-2011 20:42
Send private message

I don't thonk you have any luck with the adsl modem. You need to buy a router with no modem built in




Check out my LPFM Radio Station at www.thecheese.co.nz cool

 

 

 

Use this link to sign up to Bigpipe broadband and you'll get $20 off your first bill: Referral Link


1835 posts

Uber Geek
+1 received by user: 243

Trusted

  Reply # 488916 3-Jul-2011 21:02
Send private message

Yep, you need a non-dsl router to work with telstra clear cable modems.

The cheapest way would be to connect the cable modem to a basic wired-only router, the connect that to your d-link to use the wireless function of it.

The simplest way is to get something like this http://www.ascent.co.nz/productspecification.aspx?ItemID=364367, which plugs directly to your cable modem, and you can throw the d-link in the bin (figuratively at least)

Sharing a cable modem on your lan is not quite as easy as sharing dsl, unfortunately

 
 
 
 


BDFL - Memuneh
59428 posts

Uber Geek
+1 received by user: 10636

Administrator
Trusted
Geekzone
Lifetime subscriber

2615 posts

Uber Geek
+1 received by user: 204

Trusted

  Reply # 488930 3-Jul-2011 21:46
Send private message

I use a WRT54gs myself, with DDWRT firmware loaded.




Check out my LPFM Radio Station at www.thecheese.co.nz cool

 

 

 

Use this link to sign up to Bigpipe broadband and you'll get $20 off your first bill: Referral Link


6062 posts

Uber Geek
+1 received by user: 178

Trusted
Subscriber

  Reply # 489002 4-Jul-2011 07:37
Send private message

Hi Euan, most more modern routers well out perform the WRT54GL with stock or 3rd party firmware loaded, whilst firmware such as DD-WRT offers truck loads of options and features, the requirements of most home users (even advanced ones) is catered for by the stock firmware on your average router these days. This may not have been true 5yrs ago, but in that time since most vendors have well advanced the power and capability of their modems (just like phone cpus and desktop cpus the mip rating of all devices has climbed exponentially).

I recommend you get a N router, stick with brands such as Lynksys, Dlink and TP-Link and get one of the models in a $100-$150 range with N and your good to go.

I have linked a online site that has a good selection, remember you need a router (with integral Wireless AP) rather than just a Wireless AP, its the NAT router that lets more than one PC use the connection.

http://www.ascent.co.nz/category.aspx?majorcatID=67


Cyril

4563 posts

Uber Geek
+1 received by user: 1350


  Reply # 489136 4-Jul-2011 12:59
Send private message

You can use the DSL-G604T as just an access point, as I used one in this configuration for several months a while back (a rev. B model). The only difference was I had a seperate ADSL modem for the connection to the outside world, where you have the cable modem.

You will need to turn DHCP off (so that the cable box allocates IPs), give the DLink a static IP in the right subnet for your cable modem, and plug the ethernet cable in to one of the LAN ports on the DSL-G604T.

From memory, they are only 802.11b/g and WPA is the highest security supported, but it should get you going...

6062 posts

Uber Geek
+1 received by user: 178

Trusted
Subscriber

  Reply # 489139 4-Jul-2011 13:01
Send private message

Yep you can do that, but with no NAT router, only one PC.

Cyril

13457 posts

Uber Geek
+1 received by user: 2276

Trusted

  Reply # 489142 4-Jul-2011 13:05
Send private message

RunningMan: You can use the DSL-G604T as just an access point, as I used one in this configuration for several months a while back (a rev. B model). The only difference was I had a seperate ADSL modem for the connection to the outside world, where you have the cable modem.

You will need to turn DHCP off (so that the cable box allocates IPs), give the DLink a static IP in the right subnet for your cable modem, and plug the ethernet cable in to one of the LAN ports on the DSL-G604T.

From memory, they are only 802.11b/g and WPA is the highest security supported, but it should get you going...


The cable box doesn't allocate IPs and has no IP address itself, it's a dumb box. Your PC or router has/sets the IP address, and must also do DHCP if you want to run a local network.

It might be possible to make it work, but the easiest plan is to buy a cheap WAP.




AWS Certified Solution Architect Professional, Sysop Administrator Associate, and Developer Associate
TOGAF certified enterprise architect
Professional photographer


4563 posts

Uber Geek
+1 received by user: 1350


  Reply # 489158 4-Jul-2011 13:29
Send private message

cyril7: Yep you can do that, but with no NAT router, only one PC.

Cyril


I stand corrected Embarassed

I (wrongly) thought the cable modem boxes were capable of performing NAT functions as well.

85 posts

Master Geek
+1 received by user: 8


  Reply # 489159 4-Jul-2011 13:30
Send private message

I second Mauricio - I used the WRT54GL and its fine.  In fact I still have it, having moved to the provinces and no longer being able to get TCL cable (damnit).  I should get around to selling it I guess but maybe one day it will be useful again...

6062 posts

Uber Geek
+1 received by user: 178

Trusted
Subscriber

  Reply # 489161 4-Jul-2011 13:31
Send private message

TCL Cable modems are simply bridges, no NAT, no DHCP (that is of any use) no layer3 functions at all.

Cyril

1952 posts

Uber Geek
+1 received by user: 128

Trusted

  Reply # 489391 4-Jul-2011 21:49
Send private message

euanandrews:
I have tried pluggin the ethernet cable coming from the TelstraClear cable modem, directly into one of the LAN ports of the Router, and have inputted everything such as the static IP address, gateway, DNS...etc etc....but still have no internet connection?


Of course. You need to turn off the DHCP on your modem, but first set the modems LAN address to something that will allow you to access it from the LAN address range on your cable modem's network. For example, if the cable modem's LAN address is 192.168.1.1 then adjust it to reserve an address such as 192.168.1.254 for your adsl/wifi router. After that, turn of the router's DHCP and plug a LAN port into the cable modem. All addresses will then be supplied by the cable modem.

If it still doesn't work, you might need a crossover ethernet cable to connect the 2 modems/routers.

EDIT: Cable modem doesn't have NAT? hmmmm, you must have a router there already to be using more than one PC on the LAN, otherwise you might need an ethernet/wireless router or residential gateway?




Qualified in business, certified in fibre, stuck in copper, have to keep going  ^_^

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand's IT industry in 2018 and beyond
Posted 22-Jan-2018 12:50


Introducing your new workplace headache: Gen Z
Posted 22-Jan-2018 12:45


Jucy set to introduce electric campervan fleet
Posted 22-Jan-2018 12:41


Hawaiki cable system will be ready for service in June 2018
Posted 22-Jan-2018 12:32


New Zealand hits peak broadband data
Posted 18-Jan-2018 12:21


Amazon Echo devices coming to New Zealand early February 2018
Posted 18-Jan-2018 10:53


$3.74 million for new electric vehicles in New Zealand
Posted 17-Jan-2018 11:27


Nova 2i: Value, not excitement from Huawei
Posted 17-Jan-2018 09:02


Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.