'WIFI' controlled LED bulbs

Forums › Gadgets, robotics, home automation, electronics (including wearables) › 'WIFI' controlled LED bulbs - Limitless LED

1 | ... | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | ... | 55

216 posts

Master Geek

# 822727 20-May-2013 22:55

One person supports this post

freitasm: Philips Hue, it's now being released in New Zealand retail.

Philips Hue has some nice features. Heres a comparison chart that Jon00 has created between Philips Hue and LimitlessLED RGB and LimitlessLED Dual White. As RGB LED technology gets cheaper and brighter, we are working with our OEM manufacturer to design a new brighter RGB+W LED bulb, it will still be 1way 2.4Ghz control, it will contain dedicated White Samsung LED chips, and more rgb zones.

LimitlessLED Comparison Chart - Source: Jon00

LimitlessLED wireless lighting comparison Philips Hue

LimitlessLED wireless lighting comparison Philips Hue

richms

22736 posts

Uber Geek

Trusted

Subscriber

# 822728 20-May-2013 22:59

Will the new one be able to be set to have a definiate power on state? The problem I have with the ones I have, is if I turn them off or dim them with the remote/app, there is no way to get them back on from the wall switch. without a wall switch replacement it makes it pretty annoying for the room lights.

Also will the new RGB+W lamp still use PWM dimming or will it get an upgrade to constant current?

Richard rich.ms

LimitlessLED

216 posts

Master Geek

# 822730 20-May-2013 23:09

You can get the LED bulbs to turn back On using the wall switch alone, even if turned off by the remote, but yes it keeps the same brightness and color. some people rave that its the best feature ever, some people wish it went back to full brightness by default. needs to be a user configurable setting to satisfy everyone I think. It would be even better if you can set the default color and brightness, or set each bulb to use last color only, or set to use last brightness only. I'll put it on the list for possible future enhancements.

thanks for the great feedback.
-Hamish.
LimitlessLED.

richms

22736 posts

Uber Geek

Trusted

Subscriber

# 822731 20-May-2013 23:12

One person supports this post

Make a standard wall plate sized remote to put in the flushbox that the swich would vacate and it would be a non-issue ;)

Richard rich.ms

LimitlessLED

216 posts

Master Geek

# 822742 21-May-2013 00:11

richms: Make a standard wall plate sized remote to put in the flushbox that the switch would vacate and it would be a non-issue ;)

You could use any existing smart switch to do that, such as Zwave, zigbee, or cbus wall switch to send a UDP command to the LimitlessLED light. Most zwave, zigbee, cbus wall switches are in excess of $120 to $320 though. If you want to buy 1000qty of wall plate sized remotes, I can make you some for $9 :)

LimitlessLED

216 posts

Master Geek

# 825020 24-May-2013 21:35

Hey guys, I didn't make it very clear that there are two independent brightness settings in the LimitlessLED RGB color lightbulb, one brightness memory setting for the White Mode, and a separate brightness memory setting for the RGB colors.

So even if you turned the white mode all the way to full brightness, does not mean that the color is turned all the way up to full brightness. By default the color bulbs come with RGB White Mode at full brightness, and color at half brightness level.

Cheers,
Hamish.
-LimitlessLED.

GRISDALE

17 posts

Geek

# 825192 25-May-2013 13:01

Hello,

My flatmates given me an RGB lamp but its still on his base. I've added it to my base and we can now both control it. How do I un-enroll it from his base?

Thanks

Chris

richms

22736 posts

Uber Geek

Trusted

Subscriber

# 825201 25-May-2013 13:21

Bwahahaha...

Richard rich.ms

ninjames

3 posts

Wannabe Geek

# 825202 25-May-2013 13:24

I think to unpair you have to unpower the bulb first (wait at least a few seconds), then power it on and straight away hold the speed down command for 9 seconds. It will flash white a few times. (Similar to pairing, but for 9sec instead of 3sec).

richms

22736 posts

Uber Geek

Trusted

Subscriber

# 825207 25-May-2013 13:45

Yup that seemed to remove all pairings.

And it was the up that did it not down

Richard rich.ms

LimitlessLED

216 posts

Master Geek

# 825220 25-May-2013 14:37

Yep to unpair, you just press the S+ button for Color LED fast 5 times, after wall switch on.. or group-On button for White LED fast 5 times, after wall switch on.

-Hamish.
LimitlessLED.

latcho

44 posts

Geek

# 825222 25-May-2013 14:48

Wrong answer Harmish.

Unpairing a colorbulb is LONG press S+ after power was switched on.

Pairing a color bulb is SHORT press S+ after power.

Cheers

LimitlessLED

216 posts

Master Geek

# 825245 25-May-2013 16:03

Yeah, same thing, but true thats probably easier, the Press and Hold on the remote pulsates the command across the air really repetitively, and the bulb will see it quickly pressed 5 times. Just like you press and hold the brightness down, it continuously goes down multiple times.

richms

22736 posts

Uber Geek

Trusted

Subscriber

# 829242 1-Jun-2013 16:56

Saw this on DX today. Remote sure looks familiar, and its 2.4GHz...

http://dx.com/p/2-4ghz-touch-sense-rgb-led-controller-white-dc12-24v-217455

Richard rich.ms

LimitlessLED

216 posts

Master Geek

# 829290 1-Jun-2013 19:07

richms: Saw this on DX today. Remote sure looks familiar, and its 2.4GHz...
http://dx.com/p/2-4ghz-touch-sense-rgb-led-controller-white-dc12-24v-217455

Yep its from the same OEM manufacturer, alas for RGB strip LED lights.

1 | ... | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | ... | 55