Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | ... | 55
21447 posts

Uber Geek
+1 received by user: 4354

Trusted
Subscriber

  Reply # 1002944 11-Mar-2014 18:58
Send private message quote this post

Oh dear, I have just swapped out 2 of my viribrights for the limitless and the 2 ES ones I got are making a beeping noise when they are either dimmed or not on the extreme of cool or warm white. Will try the in other lamps incase its a resonance with the downlight that is making it worse, but the old one I have didnt do it.




Richard rich.ms

514 posts

Ultimate Geek
+1 received by user: 110


  Reply # 1002957 11-Mar-2014 19:23
Send private message quote this post

richms: Yay they have arrived, but with the new gateway I cant find the password for the web interface to configure it onto a static IP address? The new app let me configure a SSID and password, and now thankfully works with N so I can get rid of the old accesspoint I had running to let the old gateway connect, but I need to get the 2 new ones onto static IPs so I can start sending stuff to them from a rasp pi.



I read on the website they no longer have a web interface and you now have to static them via your router


21447 posts

Uber Geek
+1 received by user: 4354

Trusted
Subscriber

  Reply # 1002959 11-Mar-2014 19:27
Send private message quote this post

Also seems you can't add the ip/port in the new app either - just finds the light bases on the same layer 2 and let's you name them.

Was hoping to put the ones for the downstairs lights on their own network with an openwrt or pi as a router putting it on both my and the flatmates lans for control of the lights going in the shared areas of the house.




Richard rich.ms

514 posts

Ultimate Geek
+1 received by user: 110


  Reply # 1002967 11-Mar-2014 19:39
Send private message quote this post

Has anyone noticed a bug in the iphone version of the app?

I only have 1 bridge but every time I open the app, I have to select it from the top left list for it to work, when it used to make it the default
This is using the older bridge, untested with newer bridge which is on order


21447 posts

Uber Geek
+1 received by user: 4354

Trusted
Subscriber

  Reply # 1002968 11-Mar-2014 19:40
Send private message quote this post

I don't think the app is even seeing my old bridge.

Certainly didn't come up like the new ones do once configured.




Richard rich.ms

6328 posts

Uber Geek
+1 received by user: 391

Moderator
Trusted
Lifetime subscriber

  Reply # 1003036 11-Mar-2014 21:38
Send private message quote this post

The app isn't seeing my N wireless - no spaces or funny characters in the SSID, anyone know what's wrong?


21447 posts

Uber Geek
+1 received by user: 4354

Trusted
Subscriber

  Reply # 1003037 11-Mar-2014 21:40
Send private message quote this post

..... works for me...




Richard rich.ms

216 posts

Master Geek
+1 received by user: 12


  Reply # 1011086 22-Mar-2014 17:15
Send private message quote this post

... works for me...  Orcon Genius  Wireless-N only here. 20/40Mhz enabled.

216 posts

Master Geek
+1 received by user: 12


  Reply # 1011088 22-Mar-2014 17:17
Send private message quote this post

settings that work for me on Orcon Genius wifi router:

Channel: Auto
Mode: 802.11n only
Bandwidth: 20Mhz/40Mhz
Security Option: WPA/WPA2-PSK (Wi-Fi Protected Access Pre-Shared Key)
SSID: HomeWifi
Password: abcdabcd6

44 posts

Geek
+1 received by user: 1


  Reply # 1011242 23-Mar-2014 09:30
Send private message quote this post

richms: Oh dear, I have just swapped out 2 of my viribrights for the limitless and the 2 ES ones I got are making a beeping noise when they are either dimmed or not on the extreme of cool or warm white. Will try the in other lamps incase its a resonance with the downlight that is making it worse, but the old one I have didnt do it.

Make sure they are not connected to a wall dimmer, because even full power, that can cause beeping.

216 posts

Master Geek
+1 received by user: 12


  Reply # 1011327 23-Mar-2014 13:13
Send private message quote this post

I had just one of the 16 bulbs in a house that did that once, you could dim it a little, or wind it back a bit from full cool white, or back a bit from full warm white, and it would run perfect. I replaced it for the customer with a brand new one, and the problem disappeared.

216 posts

Master Geek
+1 received by user: 12


  Reply # 1011334 23-Mar-2014 13:29
Send private message quote this post

I also had one customer 2years ago that had some clipsal cbus dimmers. and it was solved with this new addon product:
http://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000268.pdf
http://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001577.pdf

321 posts

Ultimate Geek
+1 received by user: 49

Trusted
Spark NZ

  Reply # 1016558 1-Apr-2014 13:44
Send private message quote this post

Just ordered a set, however a little confused that you charge in USD, but include GST and Fastway courier charge then the total is charged in USD?
Maybe a suggestion I didn't know the charges were in USD until hitting the Paypal link, possibly add USD to each of the prices?

44 posts

Geek
+1 received by user: 1


  Reply # 1016797 1-Apr-2014 20:28
Send private message quote this post

Updated AppLAmp / MiLight API code for the 3 types of bulbs:

 

4-Channel RGBW, 4-channel Dual White and Single Channel RGB

 

You can use this code with Wifi Box v3 / v4, yellow/black label.

 

Click here to get the code.

 

API CODE

56 posts

Master Geek
+1 received by user: 8


  Reply # 1018682 4-Apr-2014 18:07
Send private message quote this post

Also bought a bunch of these a couple of weeks ago and I'm very impressed. For the price nothing compares but like others have commented I'm keen to see two way communication in future versions. The ability to check the light state is the only way to robustly integrate these into home automation systems which might be controlled from various sources.

 

 

 

If you're willing to share I'd be keen to hear what improvements/products you have in the works for the future and also whether we'll ever see the strip-lights / down-lights at limitlessLED prices.

1 | ... | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | ... | 55
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.