Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.
View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 | 5 
17977 posts

Uber Geek
+1 received by user: 5176

Trusted
Lifetime subscriber

  Reply # 1786458 23-May-2017 09:38
Send private message

@paul1977 I can try and remember to do it. If you are awake late at night can you PM me after 9pm and when I get back from Squash if it's not too late, I'll try it. 

 

 

 

Honestly, we don't use the scheduler so I am not sure off the top of my head. 

 

I don't know about the AP switch, it's not something I'm inclined to try right now honestly. 

 

 


2317 posts

Uber Geek
+1 received by user: 655


  Reply # 1786476 23-May-2017 10:02
Send private message

networkn:

@paul1977 I can try and remember to do it. If you are awake late at night can you PM me after 9pm and when I get back from Squash if it's not too late, I'll try it. 


 


Honestly, we don't use the scheduler so I am not sure off the top of my head. 


I don't know about the AP switch, it's not something I'm inclined to try right now honestly. 


 



Thanks, will pm tonight.

17977 posts

Uber Geek
+1 received by user: 5176

Trusted
Lifetime subscriber

  Reply # 1786627 23-May-2017 12:38
Send private message

Paul1977:
networkn:

 

@paul1977 I can try and remember to do it. If you are awake late at night can you PM me after 9pm and when I get back from Squash if it's not too late, I'll try it. 

 

 

 

 

 

 

 

Honestly, we don't use the scheduler so I am not sure off the top of my head. 

 

 

 

I don't know about the AP switch, it's not something I'm inclined to try right now honestly. 

 

 

 

 

 



Thanks, will pm tonight.

 

 

 

Anytime after 8 is ok, I wrote that originally last night and didn't send it till today by accident. 

 

 


2317 posts

Uber Geek
+1 received by user: 655


  Reply # 1786745 23-May-2017 14:00
Send private message

networkn:

 

Anytime after 8 is ok, I wrote that originally last night and didn't send it till today by accident. 

 

 

@networkn I spoke to an installer about the cost of the adaptor and asked him this question as well. He said that the fan comes on at whatever fan speed it was on when it was last turned off. I'll work on the assumption that the installer is correct, and won't put you to the trouble of testing it. It's only a minor annoyance, and not a deal breaker.

 

Got a price of $195 for the adaptor (not including install), which is not too bad. I'll try to get them to install for free if I get a service at the same time, otherwise I'll install it myself (instructions are very straight forward).

 

EDIT: OK, so I'll install it myself. $70 for them to install it. All it is is shutting off power, removing the cover, plugging it in, putting the cover back on, and turning power back on.


4935 posts

Uber Geek
+1 received by user: 101

Trusted

  Reply # 1787607 24-May-2017 17:39
Send private message

For those who want complete control over their heat pumps this Kickstarter project might be the answer

https://www.kickstarter.com/projects/ambi-labs/ambi-climate-2-ai-enhanced-air-conditioning-comfor




System One: Popcorn Hour A200,  PS3 SuperSlim, NPVR and Plex Server running on Gigabyte Brix (Windows 10 Pro), Sony BDP-S390 BD player, Pioneer AVR, Raspberry Pi running Kodi and Plex, Panasonic 60" 3D plasma, Google Chromecast

System Two: Popcorn Hour A200 ,  Oppo BDP-80 BluRay Player with hardware mode to be region free, Vivitek HD1080P 1080P DLP projector with 100" screen. Harman Kardon HK AVR 254 7.1 receiver, Samsung 4K player, Google Chromecast

 


My Google+ page 

 

 

 

https://plus.google.com/+laurencechiu

 

 


20 posts

Geek
+1 received by user: 5


  Reply # 1900118 13-Nov-2017 11:31
Send private message

Paul1977:

 

networkn:

 

I have the Mitsi Wifi control. My issue is that it uses the old Wifi security, which is very frustrating as I need an old WAP just for that. There is a minutes delay, but it's not a big deal to me. 

 

I really rate having Wifi control, but wish it had stats I could refer to etc.

 

One for my Panasonic would be ideal. 

 

I would buy another Mitsubishi Heatpump in a heart beat. I'd never buy another Fujitsu.

 

 

@networkn I'm considering getting one of these for my heat pump at home. I've had a look at the online demo thing to make sure it will do everything I want, but there is one thing I am not sure of:

 

When you set a schedule you can specify the mode and temperature but not the fan speed. So is the fan speed on a scheduled activation set to whatever it was when your programmed the schedule, or whatever the heatpump was set to when last used.

 

I ask because often in the evening I will turn the fan speed down so it is not as loud while watching TV, but if I have it scheduled to come on automatically in the morning I will always want to to start up on auto speed. I don't want to have to remember to manually change the speed back to auto at the end of the evening.

 

If you don't know the answer to this, would you be in a position to test this for me?

 

 

 

WPS is annoying. Can you set the old AP with the same SIDD and passphrase as your non-WPS APs just for connecting the heatpump and then turn off the old AP? I.e. do you just need the old AP for the initial connection?

 

Thanks

 

 

 

 

 

 

@paul1977 did you manage to come up with a solution for an AP without WPS. I have tried to repurpose a draytek for WPS which connects to the heatpump but once I try and swap out the draytek for my daily AP it won't connect. I'm not particularity keen on having the draytek there just for controlling the Wi-Fi.  


1569 posts

Uber Geek
+1 received by user: 152

Trusted

  Reply # 1900212 13-Nov-2017 13:56
Send private message

Or has anyone figured out a way to cycle modes. i.e. between Heat and Cool? Need AC during the afternoon currently, and then heat over night...





CPU: Intel 3770k| RAM: F3-2400C10D-16GTX G.Skill Trident X |MB:  Gigabyte Z77X-UD5H-WB | GFX: GV-N660OC-2GD gv-n660oc-2gd GeForce GTX 660 | Monitor: Qnix 27" 2560x1440

 

 


117 posts

Master Geek
+1 received by user: 48


  Reply # 1906840 23-Nov-2017 22:48
Send private message

Yes. I just wrote about making my own wifi -> IR heat pump controller. It replicates the remote control, so you could trigger it with home automation software or a cron job and set whatever mode you need at whatever time.

1569 posts

Uber Geek
+1 received by user: 152

Trusted

  Reply # 1907203 24-Nov-2017 16:40
Send private message

Can you share what you wrote?

 

PM if you cant post links due to limit on posts





CPU: Intel 3770k| RAM: F3-2400C10D-16GTX G.Skill Trident X |MB:  Gigabyte Z77X-UD5H-WB | GFX: GV-N660OC-2GD gv-n660oc-2gd GeForce GTX 660 | Monitor: Qnix 27" 2560x1440

 

 


Meow
7787 posts

Uber Geek
+1 received by user: 3847

Moderator
Trusted
Lifetime subscriber

  Reply # 1907209 24-Nov-2017 16:51
Send private message

Sensibo have $60US off for Black Friday bringing the unit down to $89US. Potentially one of the cheapest ways to add smartness to aircon. Excellent units.




117 posts

Master Geek
+1 received by user: 48


  Reply # 1907213 24-Nov-2017 17:14
Send private message

mentalinc:

Can you share what you wrote?


PM if you cant post links due to limit on posts



Hello. It's not written by me, but you'll find the code on GitHub under krzynio/esp8266-ir-ac-remote

That guy happens to have chosen to include the Fujitsu module from ToniA/arduino-heatpumpir, which is what I wanted. It may be simple enough to compile any of the other modules.

I also built this, ToniA/Raw-IR-decoder-for-Arduino, which I am using to compare IR codes generated from the ESP module with "real" codes generated by the remote control, to make sure it's right.

117 posts

Master Geek
+1 received by user: 48


  Reply # 1907216 24-Nov-2017 17:18
Send private message

michaelmurfy: Sensibo have $60US off for Black Friday bringing the unit down to $89US. Potentially one of the cheapest ways to add smartness to aircon. Excellent units.


A Wemos D1 Mini Pro is $6.27US from Banggood, or $10NZ if you want to get it tomorrow from Nicegear. Plus a few cents for an IR LED.

875 posts

Ultimate Geek
+1 received by user: 37

Subscriber

  Reply # 1916248 10-Dec-2017 19:57
Send private message

Anyone noticed how the latest update on the app is showing an outdoor reading? Mine is ---. Is this just for selected models with a sensor on the outside fan? My heatpump is a Floor Model, Rapid Heat version






262 posts

Ultimate Geek
+1 received by user: 163


  Reply # 1919079 13-Dec-2017 14:44
Send private message

James Bond:

 

Anyone noticed how the latest update on the app is showing an outdoor reading? Mine is ---. Is this just for selected models with a sensor on the outside fan? My heatpump is a Floor Model, Rapid Heat version

 

 

Mine shows --- when not operating, when it is running I do get an outdoor temp reading.  Mine is the hypercore high wall model.


1 | 2 | 3 | 4 | 5 
View this topic in a long page with up to 500 replies per page Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.