Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




5211 posts

Uber Geek

Trusted

# 222742 26-Aug-2017 15:25
Send private message

Got a new garage door opener installed a few months ago and didn't think about HA but it looks easy. There is a connection on the motor which is just a momentary switch (relay) it seems that closing the circuit briefly causes the door to change state (open or close).

 

There are also radio controlled remotes of course.

 

I have both GH and Alexa and would like to be able to control the door from either.  I also run HABridge on a Pi3. I am guessing some sort of Zwave relay would do the job but I would then have to invest in a Zwave bridge I presume? That could be attached to a PC or maybe the PI?

 

Any ideas of the most cost effective way of doing this? I am not worried about outsiders being able to access the door since my Dots and GH cannot hear any command from outside no matter how hard you shout!





Staying in Wellington. Check out my AirBnB in the Wellington CBD.  https://www.airbnb.co.nz/rooms/32019730  Mention GZ to get a 10% discount

 

System One: Popcorn Hour A200,  PS3 SuperSlim, NPVR and Plex Server running on Gigabyte Brix (Windows 10 Pro), Sony BDP-S390 BD player, Pioneer AVR, Raspberry Pi running Kodi and Plex, Panasonic 60" 3D plasma, Google Chromecast

System Two: Popcorn Hour A200 ,  Oppo BDP-80 BluRay Player with hardware mode to be region free, Vivitek HD1080P 1080P DLP projector with 100" screen, Denon AVRS730H 7.2 Channel Dolby Atmos/DTS-X AV Receiver, Samsung 4K player, Google Chromecast, Odroid C2 running Kodi and Plex

 

 


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
285 posts

Ultimate Geek

Lifetime subscriber

  # 1853500 27-Aug-2017 21:48
Send private message

I use the Aeotec (https://aeotec.com/z-wave-garage-door-controller) and it works quite well. Has a tilt sensor as well so tells me if someone tries to jar the door open.


22888 posts

Uber Geek

Trusted
Subscriber

  # 1853511 27-Aug-2017 22:19
Send private message

Im still trying to comprehend the usefulness of triggering the garage door by voice from the house. I guess if you use it as a main entrance to the house, but IMO running a door like that without seeing it is too risky.





Richard rich.ms

 
 
 
 


3885 posts

Uber Geek

Subscriber

  # 1853523 27-Aug-2017 23:28

You will definitely need some sensors to report when the door is currently open or closed. Or at the least make a latching type circuit, so you have the equivalent of 2 buttons for door control, 1 for open, other for close. And pushing the open button when door already open, or close when door already closed, won't do anything. Otherwise you run the risk of the door state and what Alexa thinks the door state is, getting out of sync.

 

Best would also be error reporting as well. As the opener should be designed for safety to reverse open again if it hits an obstruction while closing. So being able to report this and/or a jammed door would be useful as well.






2885 posts

Uber Geek

Trusted
Lifetime subscriber

  # 1853570 28-Aug-2017 06:30
One person supports this post
Send private message




My views (except when I am looking out their windows) are not those of my employer.

609 posts

Ultimate Geek

Trusted

  # 1853591 28-Aug-2017 08:08
Send private message

I installed a Belkin Wemo Maker on my garage door and it works well with open/close sensor (magnetic reed switch).




5211 posts

Uber Geek

Trusted

  # 1853868 28-Aug-2017 10:46
Send private message

t0ny:

 

I use the Aeotec (https://aeotec.com/z-wave-garage-door-controller) and it works quite well. Has a tilt sensor as well so tells me if someone tries to jar the door open.

 

 

 

 

That looks good. However in my previous research it appeared that tilt sensors only work with folding door, not tilting doors. So you mount the sensor on the bottom section and when that hits the horizontal the door is open. However with a tilting door I would image the sensor would signal the door open as soon as the door begins to lift.

 

 

 

I have seen other sensor that you mount on the rear of the garage and bounce a light off the door. When the door isn't there, no light is reflected and so the door is open.

 

What sort of door do you have?





Staying in Wellington. Check out my AirBnB in the Wellington CBD.  https://www.airbnb.co.nz/rooms/32019730  Mention GZ to get a 10% discount

 

System One: Popcorn Hour A200,  PS3 SuperSlim, NPVR and Plex Server running on Gigabyte Brix (Windows 10 Pro), Sony BDP-S390 BD player, Pioneer AVR, Raspberry Pi running Kodi and Plex, Panasonic 60" 3D plasma, Google Chromecast

System Two: Popcorn Hour A200 ,  Oppo BDP-80 BluRay Player with hardware mode to be region free, Vivitek HD1080P 1080P DLP projector with 100" screen, Denon AVRS730H 7.2 Channel Dolby Atmos/DTS-X AV Receiver, Samsung 4K player, Google Chromecast, Odroid C2 running Kodi and Plex

 

 




5211 posts

Uber Geek

Trusted

  # 1853869 28-Aug-2017 10:49
Send private message

richms:

 

Im still trying to comprehend the usefulness of triggering the garage door by voice from the house. I guess if you use it as a main entrance to the house, but IMO running a door like that without seeing it is too risky.

 

 

Actually IFTTT is one of the features you can have. So when you drive near your house, the phone senses you are near and opens the door. And similarly as you drive away it closes the door.

 

My door is quite safe in that is starts very slowly and will stop when it encounters any obstruction.

 

Seeing another poster about the Belkin would solve the issue I presume of knowing if the door is open or closed.





Staying in Wellington. Check out my AirBnB in the Wellington CBD.  https://www.airbnb.co.nz/rooms/32019730  Mention GZ to get a 10% discount

 

System One: Popcorn Hour A200,  PS3 SuperSlim, NPVR and Plex Server running on Gigabyte Brix (Windows 10 Pro), Sony BDP-S390 BD player, Pioneer AVR, Raspberry Pi running Kodi and Plex, Panasonic 60" 3D plasma, Google Chromecast

System Two: Popcorn Hour A200 ,  Oppo BDP-80 BluRay Player with hardware mode to be region free, Vivitek HD1080P 1080P DLP projector with 100" screen, Denon AVRS730H 7.2 Channel Dolby Atmos/DTS-X AV Receiver, Samsung 4K player, Google Chromecast, Odroid C2 running Kodi and Plex

 

 


 
 
 
 


285 posts

Ultimate Geek

Lifetime subscriber

  # 1853874 28-Aug-2017 10:54
Send private message

sectional door. The sensor is mounted up top so a tilt can be detected even if the door goes up slightly (as its the first section of the door that tilts)




5211 posts

Uber Geek

Trusted

  # 1853878 28-Aug-2017 10:58
Send private message

dacraka:

 

I installed a Belkin Wemo Maker on my garage door and it works well with open/close sensor (magnetic reed switch).

 

 

 

 

That looks good. I presume it can trigger a low voltage switch which is what the garage door opener uses? I just have a switch on the wall that when triggered closes a switch on the motor and triggers open/close. The open/close sensor would be useful (links?) if it could be read by an app.





Staying in Wellington. Check out my AirBnB in the Wellington CBD.  https://www.airbnb.co.nz/rooms/32019730  Mention GZ to get a 10% discount

 

System One: Popcorn Hour A200,  PS3 SuperSlim, NPVR and Plex Server running on Gigabyte Brix (Windows 10 Pro), Sony BDP-S390 BD player, Pioneer AVR, Raspberry Pi running Kodi and Plex, Panasonic 60" 3D plasma, Google Chromecast

System Two: Popcorn Hour A200 ,  Oppo BDP-80 BluRay Player with hardware mode to be region free, Vivitek HD1080P 1080P DLP projector with 100" screen, Denon AVRS730H 7.2 Channel Dolby Atmos/DTS-X AV Receiver, Samsung 4K player, Google Chromecast, Odroid C2 running Kodi and Plex

 

 


/dev/null
9024 posts

Uber Geek

Moderator
Trusted
Lifetime subscriber

  # 1853910 28-Aug-2017 11:23
Send private message

I just recently assisted one of my friends with building his own (out of a ESP8266, a relay and a couple of reid switches). He runs his own custom internal API to control the hue bulbs, garage door etc.

 

Something like this however the one we built is a lot more simple. I'll try and get him to share some screenshots of his internal API if anyone is interested.





610 posts

Ultimate Geek

Lifetime subscriber

  # 1853925 28-Aug-2017 11:40
Send private message

hairy1:https://opengarage.io

 

Looks good. Does anyone have any comments on supply and delivery to NZ?





Rob

19 posts

Geek

Trusted

  # 1853935 28-Aug-2017 11:54
Send private message

michaelmurfy:

 

I just recently assisted one of my friends with building his own (out of a ESP8266, a relay and a couple of reid switches). He runs his own custom internal API to control the hue bulbs, garage door etc.

 

Something like this however the one we built is a lot more simple. I'll try and get him to share some screenshots of his internal API if anyone is interested.

 

 

I used a heavily modified version off this project: https://www.hackster.io/jason-cox/esp8266-garage-door-monitor-bd6f06

 

I probably spent around $110 (includes expensive shipping) to get the ESP8266 and all the other components, case, cables, relay, switches etc.

 

My setup is: ESP8266/wifi/http -> Odroid/NodeJS/OAuth -> websockets -> browser

 

I have my own Node API using websockets for any interface. You could modify the API to talk to Alexa or IFTTT. I don't like hooking things up to the cloud due to the latency. Though if you control the door based off your location this wont really be an issue.

 

I recorded this video as a latency test:

 

 

It works well. I can provide a cut down version of my API, but wouldn't recommend it unless you like Node.


125 posts

Master Geek


  # 1853980 28-Aug-2017 12:57
Send private message

robfish:

 

hairy1:https://opengarage.io

 

Looks good. Does anyone have any comments on supply and delivery to NZ?

 

 

Piece of cake. Ordered 1 in May, everything worked as it should.  Have been playing with different tools to trigger it, IFTTT using webhooks has been fine, with notifications for when the button is pushed.


331 posts

Ultimate Geek


  # 1854030 28-Aug-2017 13:59
Send private message

I also use Opengarage and have it integrated with Home Assistant. As per a previous comment I made:

 

Opengarage works well - took me about twenty minutes to set it up and haven't really thought about the tech side since. Someone on the homeassistant forum gave some good info on it and added the appropriate support, so it was easy to add. (As far as connectivity goes, my homeassistant stuff is separated from the WAN, so if I need to do anything remotely I just VPN in first).

 

As far as the open/closed reading goes, you can view the current result of the distance sensors so I just checked on what the registered distance was with the door up and down and set my open and closed parameters accordingly (it's effectively 3ft vs infinity as it's pointing at sky if there's no door there, so not much chance of false interpretations).

 

I didn't bother seeing where I could attach the activation wires to the actual motor unit, but instead used the spare remote button integrated into the manual pull-down release. I just popped that off and wired the opengarage unit directly to it.

 

Have a double-garage, but only one side has an electric door-opener on it, otherwise I would get another opengarage unit for the other side - maybe make it myself instead, as I think I did a quick costing at only about $15 worth of parts, but the amount of time it would take and who I could blame if it didn't work meant that I decided on the made-up one to start with.

 

Pretty quick delivery as I recall - less than a week after ordering




5211 posts

Uber Geek

Trusted

  # 1854193 28-Aug-2017 16:45
Send private message

t0ny:

 

sectional door. The sensor is mounted up top so a tilt can be detected even if the door goes up slightly (as its the first section of the door that tilts)

 

 

Then I presume that if the sensor is mounted on the bottom or top of a tilt-a-door then it will register an open as soon as the door tilts since the whole door pivots?

 

Out of interest, where did you get it from and how much?

 

Thanks





Staying in Wellington. Check out my AirBnB in the Wellington CBD.  https://www.airbnb.co.nz/rooms/32019730  Mention GZ to get a 10% discount

 

System One: Popcorn Hour A200,  PS3 SuperSlim, NPVR and Plex Server running on Gigabyte Brix (Windows 10 Pro), Sony BDP-S390 BD player, Pioneer AVR, Raspberry Pi running Kodi and Plex, Panasonic 60" 3D plasma, Google Chromecast

System Two: Popcorn Hour A200 ,  Oppo BDP-80 BluRay Player with hardware mode to be region free, Vivitek HD1080P 1080P DLP projector with 100" screen, Denon AVRS730H 7.2 Channel Dolby Atmos/DTS-X AV Receiver, Samsung 4K player, Google Chromecast, Odroid C2 running Kodi and Plex

 

 


 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Vodafone integrates eSIM into device and wearable roadmap
Posted 17-Jan-2020 09:45


Do you need this camera app? Group investigates privacy implications
Posted 16-Jan-2020 03:30


JBL launches headphones range designed for gaming
Posted 13-Jan-2020 09:59


Withings introduces ScanWatch wearable combining ECG and sleep apnea detection
Posted 9-Jan-2020 18:34


NZ Police releases public app
Posted 8-Jan-2020 11:43


Suunto 7 combine sports and smart features on new smartwatch generation
Posted 7-Jan-2020 16:06


Intel brings innovation with technology spanning the cloud, network, edge and PC
Posted 7-Jan-2020 15:54


AMD announces high performance desktop and ultrathin laptop processors
Posted 7-Jan-2020 15:42


AMD unveils four new desktop and mobile GPUs including AMD Radeon RX 5600
Posted 7-Jan-2020 15:32


Consolidation in video streaming market with Spark selling Lightbox to Sky
Posted 19-Dec-2019 09:09


Intel introduces cryogenic control chip to enable quantum computers
Posted 10-Dec-2019 21:32


Vodafone 5G service live in four cities
Posted 10-Dec-2019 08:30


Samsung Galaxy Fold now available in New Zealand
Posted 6-Dec-2019 00:01


NZ company oDocs awarded US$ 100,000 Dubai World Expo grant
Posted 5-Dec-2019 16:00


New Zealand Rugby Selects AWS-Powered Analytics for Deeper Game Insights
Posted 5-Dec-2019 11:33



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.