Hi there

I tried to setup my Belkin N600 router with slingshot fibre but had no luck.

I came across this post from Captain Awesome CamH. But I cannot see any 802.11p or 802.11Q Vlan ID settings. Can someone point me to the right direction. Thanks


 

 

If you have your Slingshot username and password, try the following. I believe these are correct, but I'm doing this off the top of my head so it *may* not be 100% what's displayed. I also don't work for Slingshot, however I have set a few of these connections up before.

 

  • Plug the cable from your ONT into the WAN port on your N4FV
  • Under Advanced Setup, click WAN interface
  • Delete any existing WAN interface
  • Add a new WAN interface using WAN / GE1 interface (I'm not sure of the exact name)
  • On the next page, select PPP over Ethernet (PPPoE)
  • Under 802.11p Priority, empty the box
  • Under 802.11Q VLAN ID, enter 10
  • On the next page, enter your PPP username and password you've received from Slingshot
  • Click next if any additional pages are presented
This should be it - Let me know if you have any questions I may be able to assist with.