Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


hu



30 posts

Geek


# 220340 6-Aug-2017 19:39
Send private message

I'm using fibre and intend upgrading my slingshot provided Netcomm NF4V to the Netcom NF17ACV. If I copy the settings backup folder from the NF4V onto the new NF17ACV will I be good to go? ... Or will i have to spend hours talking to Slingshot.

 

 

Filter this topic showing only the reply marked as answer Create new topic
1408 posts

Uber Geek


  # 1840192 6-Aug-2017 19:41
Send private message

You may need to update the modem firmware to the latest, then use the Basic Setup wizard should do the trick...

 

 

Relevant thread from two days ago...

 

https://www.geekzone.co.nz/forums.asp?forumid=66&topicid=220308

 

 

 

Is this naked broadband or do you have a phone service with them (VoIP)?. I would think the modem would validate a uploaded configuration file for hardware model/version so if you are trying to copy the VoIP config it probably won't work.

hu



30 posts

Geek


  # 1840197 6-Aug-2017 19:47
Send private message

Thanks. I'll download the firmware in anticipation and when modem arrives this week i'll give that a go. Do you know if Slingshot will still need access on some level?


 
 
 
 


hu



30 posts

Geek


  # 1840198 6-Aug-2017 19:49
Send private message

Sorry didn't see your question yes VoIP over fibre


1408 posts

Uber Geek


  # 1840199 6-Aug-2017 19:51
Send private message

I don't think Slingshot need access to the modem for naked broadband internet.

 

 

You may want to take the time to double check whether they use PPPoE or DHCP/IPoE but it is a tagged WAN interface. I think it is the former and they use port authentication so just a generic username of firstcontact@slingshot.co.nz with any password is needed.

hu



30 posts

Geek


  # 1840205 6-Aug-2017 19:59
Send private message

Cheers i'll check those settings on old one before I try new setup


1408 posts

Uber Geek


  # 1840206 6-Aug-2017 20:03
Send private message

There's a guide here on how to extract SIP credentials from the saved configuration file for Orcon's NF4V. Haven't tried this myself so not sure if it is still 100% applicable or works for Slingshot.

 

 

Worst case you may need to keep the NF4V as the primary router and have your new NF17ACV plugged in behind it... for its wireless I assume.

hu



30 posts

Geek


  # 1840211 6-Aug-2017 20:12
Send private message

Ok i'll check that out and yes for its wireless. NF4V as the primary router so how does that work? whats the setup?


 
 
 
 


1408 posts

Uber Geek


  # 1840225 6-Aug-2017 20:20
Send private message

For a double NAT setup, connect your NF17ACV WAN (blue) port to one of the LAN ports on the back of the NF4V. Run the Basic Setup wizard and choose Ethernet WAN, IP over Ethernet for the WAN mode step, then Obtain IP address automatically.

 

 

You could also do a bridged setup by turning off the LAN DHCP server, setting a LAN IP of the NF17ACV to the same range as the NF4V then connecting the LAN ports of the devices together. The NF4V Wi-Fi can then be turned off.

hu



30 posts

Geek


  # 1840227 6-Aug-2017 20:25
Send private message

Wow OK. let's see how I go! Ngā mihi anō


hu



30 posts

Geek


  # 1844870 11-Aug-2017 03:01
One person supports this post
Send private message

Hey thanks Y for your help. I emailed Slingshot for psw and settings for the phone and they rang and told me it wasn't possible and that I would need to bridge as that is what he had done. Anyway I set the fibre up... mucked around with phone settings guessed the pswd, as person I spoke to wouldn't give it. Really didn't think I'd manage it but before I had even finished, the phone rang! Voilà women can do anything!!laughing


543 posts

Ultimate Geek

Subscriber

  # 1845439 11-Aug-2017 23:02
Send private message

This Help page from Slingshot suggests they will give you passwords. It is interesting they didn't.


hu



30 posts

Geek


  # 1845443 11-Aug-2017 23:15
Send private message

I'll have a look at that. I just had the feeling he wanted me to stick with their modem and he was very clear that I wouldn't be able to get it happening. Now my issue is drop offs, usually quite late at night. At least I know now its not a modem issue.

Filter this topic showing only the reply marked as answer Create new topic



Switch your broadband provider now - compare prices


Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Chorus to launch Hyperfibre service
Posted 18-Nov-2019 15:00


Microsoft launches first Experience Center worldwide for Asia Pacific in Singapore
Posted 13-Nov-2019 13:08


Disney+ comes to LG Smart TVs
Posted 13-Nov-2019 12:55


Spark launches new wireless broadband "Unplan Metro"
Posted 11-Nov-2019 08:19


Malwarebytes overhauls flagship product with new UI, faster engine and lighter footprint
Posted 6-Nov-2019 11:48


CarbonClick launches into Digital Marketplaces
Posted 6-Nov-2019 11:42


Kordia offers Microsoft Azure Peering Service
Posted 6-Nov-2019 11:41


Spark 5G live on Auckland Harbour for Emirates Team New Zealand
Posted 4-Nov-2019 17:30


BNZ and Vodafone partner to boost NZ Tech for SME
Posted 31-Oct-2019 17:14


Nokia 7.2 available in New Zealand
Posted 31-Oct-2019 16:24


2talk launches Microsoft Teams Direct Routing product
Posted 29-Oct-2019 10:35


New Breast Cancer Foundation app puts power in Kiwi women's hands
Posted 25-Oct-2019 16:13


OPPO Reno2 Series lands, alongside hybrid noise-cancelling Wireless Headphones
Posted 24-Oct-2019 15:32


Waikato Data Scientists awarded $13 million from the Government
Posted 24-Oct-2019 15:27


D-Link launches Wave 2 Unified Access Points
Posted 24-Oct-2019 15:07



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.