Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




125 posts

Master Geek


#111849 16-Nov-2012 17:31
Send private message

Hi all,

I've just switched to Orcon Genius (Unlimited of course) from Slingshot, today and am having problems using my switch with the Genius router.

Simply put, I don't seem to get any Internet access if i plug my computer into the switch. It used to work fine with my old TPL modem and I'm wondering if there's anything special i need to do to get it to work with Genius.

It's a simple TP-Link Gigabit switch (TL-SG1005D). I use it to get gigabit speeds (or so between my media server -> desktop PC.

Filter this topic showing only the reply marked as answer Create new topic
28700 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  #718423 16-Nov-2012 18:41
Send private message

Shouldn't be anything special. I assume that you do have the switch plugged into one of the LAN ports, and not the port designated for WAN? <br />



125 posts

Master Geek


  #718425 16-Nov-2012 18:46
Send private message

sbiddle: Shouldn't be anything special. I assume that you do have the switch plugged into one of the LAN ports, and not the port designated for WAN? &amp;lt;br /&amp;gt;
That's what i thought, I plugged it into LAN1, but it doesn't seem to work. I'll play around with it more.

Edit: Nothing seems to show up in the DHCP list at all.

Edit2: I'm running 1202 version, I've seen people on the forum talk about 14XX as well, But icouldn't find any instructions to upgrade ie where to find updated firmware, does anyone know?

 
 
 
 


6122 posts

Uber Geek

Moderator
Trusted
Lifetime subscriber

  #718498 16-Nov-2012 20:59
Send private message

Does the genius recognise that the switch is plugged into one of its ports?



125 posts

Master Geek


  #718505 16-Nov-2012 21:22
Send private message

gehenna: Does the genius recognise that the switch is plugged into one of its ports?


Oddly, there's no LAN indicators on the modem itself, or even lights on the ports (even for the working one). I checked the admin/configure page for the modem, and I can't see anything in the status or otherwise pages to actually check if it's finding a link.


3344 posts

Uber Geek

Trusted
Vocus

  #718512 16-Nov-2012 21:44
Send private message

If you're not getting link, that will be a problem.

The switch says it's auto uplink sensing, so there should be no need for a crossover cable or anything fancy.

I know we have staff etc using switches on their Genius routers OK.  

Tried a different cable?  

Also watch out that sometimes the sockets on the Genius can be very "stiff" (depending on the cable) and sometimes require a fair bit of force before the cable will click into place.

Try a laptop etc. on the same ports on the Genius AND the switch.  You should at least get a link light.

Let us know how you get on.



125 posts

Master Geek


  #718538 16-Nov-2012 23:05
Send private message

ubergeeknz: If you're not getting link, that will be a problem.

The switch says it's auto uplink sensing, so there should be no need for a crossover cable or anything fancy.

I know we have staff etc using switches on their Genius routers OK.  

Tried a different cable?  

Also watch out that sometimes the sockets on the Genius can be very "stiff" (depending on the cable) and sometimes require a fair bit of force before the cable will click into place.

Try a laptop etc. on the same ports on the Genius AND the switch.  You should at least get a link light.

Let us know how you get on.


Thanks for replying. Oddly, there's no Link light on even the cable which IS working (Ie the one to the computer I'm on right now). Could it be a faulty genius modem if there is indeed supposed to be a link light?

I'll try a laptop and another PC tomorrow morning see if there's any further 

Edit: There's a link light on the switch side. But nothing on the Orcon side (As mentioned above, at all)

3344 posts

Uber Geek

Trusted
Vocus

  #718547 16-Nov-2012 23:16
Send private message

I see, did not realise you were getting link light on the switch side.

There is only a single LAN light on the Genius, it's an icon with 2 PC's on it, should be lit up blue if you have anything plugged into any LAN ports.

Having said that, if a laptop works on any given LAN port then so should your switch.

 
 
 
 


I fix stuff!
1796 posts

Uber Geek

Trusted
Vocus
Subscriber

  #718639 17-Nov-2012 09:39
Send private message

The Genius modem is only 10/100mbit.

Not sure on your switch specs, but its its expecting 1Gig ports then that could explain why laptops work and the Genius doesn't.


I fix stuff!
1796 posts

Uber Geek

Trusted
Vocus
Subscriber

  #718641 17-Nov-2012 09:40
Send private message

Sounddude: The Genius modem is only 10/100mbit.

Not sure on your switch specs, but if its expecting 1Gig ports then that could explain why laptops work and the Genius doesn't.

Have you tried any other ports on the genius modem? Ports 1, 2 and 3 are LAN ports (port 4 is reserved for UFB uplink)




125 posts

Master Geek


  #718651 17-Nov-2012 10:14
Send private message

Sounddude: The Genius modem is only 10/100mbit.

Not sure on your switch specs, but its its expecting 1Gig ports then that could explain why laptops work and the Genius doesn't.



My old modem was also 100 and it did work.

Edit: Just tried a different port and then rebooted the modem. It seems to be working now! 

Thanks for the help guys.

85 posts

Master Geek


  #725064 30-Nov-2012 10:51
Send private message

Log into your Genius Modem 10.1.1.1 and check where it says Modem is currently configured for: that it is not set to UFB if you are on broadband over copper as the UFB option turns LAN port 1 into a wan port if you have fibre which is the port the run a ethernet cable from the ONT to Genius unit. If that is not the case then i would recomend contacting orcon as your unit is possibly faulty.

3344 posts

Uber Geek

Trusted
Vocus

  #725067 30-Nov-2012 10:59
Send private message

Chrisbexsta: Log into your Genius Modem 10.1.1.1 and check where it says Modem is currently configured for: that it is not set to UFB if you are on broadband over copper as the UFB option turns LAN port 1 into a wan port if you have fibre which is the port the run a ethernet cable from the ONT to Genius unit. If that is not the case then i would recomend contacting orcon as your unit is possibly faulty.


Hi Chris,

Thanks for the input.  I believe the OP has solved their issue already, but I wanted to clarify a couple of points.

In fact LAN port 4 is used a WAN port if UFB mode is set.  On new modems shipping there is a blank inserted in this port marked "Reserved for Fibre" - which can be removed for a UFB connection.

Also, UFB mode will automatically fallback to ADSL if UFB connection is not present, so it's best to have it set to UFB regardless (it is by default in the newer firmwares).  This way if/when you get UFB in the future, the Genius will be ready-to-go and you won't need to change a thing.

Hope that clarifies :)

Cheers,

Dan

85 posts

Master Geek


  #725069 30-Nov-2012 11:03
Send private message

I was always thinking it was LAN 1 because when they upgraded mine ages ago i had to change the ethernet cable from 1 to 2 as 1 stopped working. I just tried LAN 1 on my unit and it is working must have been a bug with older firmware or something odd.

Filter this topic showing only the reply marked as answer Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Vodafone mobile data plans with unlimited data
Posted 26-Feb-2020 06:55


Vodafone launches innovation initiatives to help businesses use 5G
Posted 26-Feb-2020 05:00


Ultimate Ears HYPERBOOM brings massive sound and extreme bass
Posted 25-Feb-2020 09:00


Withings launches three new devices to help monitor heart health from home
Posted 13-Feb-2020 20:05


Auckland start-up Yourcar matches new car buyers with dealerships
Posted 13-Feb-2020 18:05


School gardens go high tech to teach kids the importance of technology
Posted 13-Feb-2020 11:10


Malwarebytes finds Mac threats outpace Windows for the first time
Posted 13-Feb-2020 08:01


Amazon launches Echo Show 8 in Australia and New Zealand
Posted 8-Feb-2020 20:36


Vodafone New Zealand starts two year partnership with LetsPlay.Live
Posted 28-Jan-2020 11:24


Ring launches indoor-only security camera
Posted 23-Jan-2020 17:26


New report findings will help schools implement the digital technologies curriculum content
Posted 23-Jan-2020 17:25


N4L to upgrade & support wireless internet inside schools
Posted 23-Jan-2020 17:22


Netflix releases 21 Studio Ghibli works
Posted 22-Jan-2020 11:42


Vodafone integrates eSIM into device and wearable roadmap
Posted 17-Jan-2020 09:45


Do you need this camera app? Group investigates privacy implications
Posted 16-Jan-2020 03:30



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.